From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.aribaud@free.fr>
Date: Sun, 03 Oct 2010 13:06:33 +0200
Subject: [U-Boot] denx/master is not building for OMAP3 platforms except
 Beagle
In-Reply-To: <19F8576C6E063C45BE387C64729E739404AA21C49A@dbde02.ent.ti.com>
References: <19F8576C6E063C45BE387C64729E739404AA21C49A@dbde02.ent.ti.com>
Message-ID: <4CA863B9.5090204@free.fr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Le 03/10/2010 12:50, Hiremath, Vaibhav a ?crit :
> Hi All,
>
> I think the current denx/matser is broken and is not building up for OMAP3 platforms except Beagle board.
>
> The error message on build is -
>
> board.c: In function '__dram_init_banksize':
> board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
> board.c:468: error: (Each undeclared identifier is reported only once
> board.c:468: error: for each function it appears in.)
> board.c: In function 'board_init_f':
> board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function)
> board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
> make[1]: *** [board.o] Error 1
> make[1]: Leaving directory `/home/devel/git-work/denx-uboot/arch/arm/lib'
> make: *** [arch/arm/lib/libarm.a] Error 2
>
>
> The root-cause is-
>
> +#undef CONFIG_SYS_ARM_WITHOUT_RELOC
> +#define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
>
>
> The above definition is missing in all (zoom1, zoom2, evm, am3517evm, sdp3430, overo, Pandora) config files.
>
> Am I missing something here? Just wanted to cross-check before posting patch to the list.

This is due to the introduction of relocation on ARM platforms -- see 
Wolfgang's recent release announcement.

Note that adding the definition may not be sufficient to get relocation 
working.

Amicalement,
-- 
Albert.