From: Reinhard Meyer <u-boot@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] AT91 clock and timer cleanups
Date: Mon, 04 Oct 2010 21:22:51 +0200 [thread overview]
Message-ID: <4CAA298B.5020105@emk-elektronik.de> (raw)
In-Reply-To: <20101004173255.2CC951539A0@gemini.denx.de>
Dear Wolfgang Denk,
>> The general question, however was, if that approach is OK with you.
>
> Well, I still prefer to have this added to a single, central location
> instead to a large number of board config files.
AT91 does not have a really large number of config files.
>
> However, if you have to touch all these board config files anyway (and
> accept the need to re-test on all affected boards) then I don't insist
> on any specific implementation.
No, I can't re-test on other AT91 boards. With the relocation patch
none of them builds right now, and without the clock/timer cleanup
they would not work, even if they would build. Since the respective
maintainers are required to fix for relocation they can also add the
define required to make the relocated code work...
Currently, a "./MAKEALL at91" is pointless.
> Please don't forget to document the new CONFOG_ variable (in the
> README).
In which README and where in it? So far in no README are such variables
listed/explained (of type CONFIG_<arch>,<SoC>,<Family>)
Best regards,
Reinhard
next prev parent reply other threads:[~2010-10-04 19:22 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-30 13:57 [U-Boot] ARM relocation, probably trivial mistake Reinhard Meyer
2010-09-30 14:08 ` Stefano Babic
2010-09-30 14:20 ` Reinhard Meyer
2010-09-30 15:39 ` Heiko Schocher
2010-09-30 16:06 ` Reinhard Meyer
2010-09-30 15:38 ` Heiko Schocher
2010-09-30 17:43 ` Wolfgang Denk
2010-10-01 5:25 ` Heiko Schocher
2010-10-01 5:40 ` Albert ARIBAUD
2010-10-01 5:53 ` Heiko Schocher
2010-10-01 6:39 ` Reinhard Meyer
2010-10-01 6:57 ` Heiko Schocher
2010-10-01 8:45 ` Wolfgang Denk
2010-10-01 7:01 ` Albert ARIBAUD
2010-10-01 7:42 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Reinhard Meyer
2010-10-01 8:27 ` Heiko Schocher
2010-10-01 10:44 ` Reinhard Meyer
2010-10-01 10:55 ` Wolfgang Denk
2010-10-01 11:03 ` Reinhard Meyer
2010-10-01 11:21 ` Wolfgang Denk
2010-10-01 11:37 ` Reinhard Meyer
2010-10-01 11:59 ` Wolfgang Denk
2010-10-01 12:22 ` Reinhard Meyer
2010-10-01 12:47 ` Reinhard Meyer
2010-10-01 12:55 ` Wolfgang Denk
2010-10-01 14:55 ` Reinhard Meyer
2010-10-02 8:53 ` Heiko Schocher
2010-10-01 15:47 ` Steve Sakoman
2010-10-02 7:15 ` [U-Boot] ARM relocation, question to Heiko Reinhard Meyer
[not found] ` <4CA6E517.9040701@fr<1286167382.22760.19.camel@ptyser-laptop>
2010-10-02 7:53 ` Albert ARIBAUD
2010-10-02 8:10 ` Reinhard Meyer
2010-10-02 8:26 ` Albert ARIBAUD
2010-10-03 18:04 ` Wolfgang Denk
2010-10-02 9:08 ` Heiko Schocher
2010-10-02 9:29 ` Albert ARIBAUD
2010-10-03 18:05 ` Wolfgang Denk
2010-10-02 10:17 ` Joakim Tjernlund
2010-10-02 16:21 ` J. William Campbell
2010-10-02 18:33 ` Reinhard Meyer
2010-10-03 18:22 ` Wolfgang Denk
2010-10-02 20:39 ` Reinhard Meyer
2010-10-02 21:09 ` Albert ARIBAUD
2010-10-02 23:07 ` Graeme Russ
2010-10-03 7:10 ` Albert ARIBAUD
2010-10-03 8:44 ` Graeme Russ
2010-10-03 8:58 ` Albert ARIBAUD
2010-10-03 15:36 ` J. William Campbell
2010-10-03 16:47 ` Albert ARIBAUD
2010-10-03 17:54 ` Albert ARIBAUD
2010-10-03 18:43 ` Wolfgang Denk
2010-10-04 5:41 ` Heiko Schocher
2010-10-03 18:29 ` Wolfgang Denk
2010-10-03 19:26 ` J. William Campbell
2010-10-04 5:52 ` Heiko Schocher
2010-10-03 18:14 ` Wolfgang Denk
2010-10-03 18:54 ` J. William Campbell
2010-10-03 19:52 ` Albert ARIBAUD
2010-10-03 18:03 ` Wolfgang Denk
2010-10-03 18:34 ` Albert ARIBAUD
2010-10-03 18:45 ` Wolfgang Denk
2010-10-04 6:08 ` Heiko Schocher
2010-10-04 6:40 ` Albert ARIBAUD
2010-10-04 7:27 ` Reinhard Meyer
2010-10-04 8:28 ` Albert ARIBAUD
2010-10-04 8:57 ` Heiko Schocher
2010-10-04 9:27 ` Albert ARIBAUD
2010-10-04 10:01 ` Joakim Tjernlund
2010-10-04 9:58 ` Graeme Russ
2010-10-04 14:17 ` Albert ARIBAUD
2010-10-04 14:25 ` Rogan Dawes
2010-10-04 15:24 ` Albert ARIBAUD
2010-10-04 16:31 ` Stefan Roese
2010-10-04 21:31 ` Albert ARIBAUD
2010-10-04 7:44 ` Albert ARIBAUD
2010-10-04 4:43 ` Peter Tyser
2010-10-04 6:08 ` Wolfgang Denk
2010-10-04 7:36 ` Joakim Tjernlund
2010-10-04 8:08 ` Albert ARIBAUD
2010-10-04 8:28 ` Joakim Tjernlund
2010-10-04 8:33 ` Albert ARIBAUD
[not found] ` <OF05779DA1.EF3C4954-ONC12577B2.00307A0D-C12577B2.0030B9C0@tran <4CAA1613.80002@comcast.net>
2010-10-04 8:52 ` Joakim Tjernlund
2010-10-04 9:10 ` Albert ARIBAUD
2010-10-04 10:13 ` Wolfgang Denk
2010-10-04 15:28 ` J. William Campbell
2010-10-04 15:52 ` Albert ARIBAUD
2010-10-04 17:06 ` Wolfgang Denk
2010-10-04 17:59 ` J. William Campbell
2010-10-04 18:43 ` Joakim Tjernlund
2010-10-04 21:10 ` Wolfgang Denk
2010-10-05 7:26 ` Joakim Tjernlund
2010-10-04 17:04 ` Graeme Russ
2010-10-04 17:14 ` Wolfgang Denk
2010-10-04 8:27 ` Wolfgang Denk
2010-10-02 8:49 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Heiko Schocher
2010-10-01 12:49 ` Wolfgang Denk
2010-10-01 14:48 ` Reinhard Meyer
2010-10-04 7:44 ` [U-Boot] AT91 clock and timer cleanups (was: ARM relocation, probably trivial mistake - back to original problem) Reinhard Meyer
2010-10-04 8:32 ` Wolfgang Denk
2010-10-04 8:42 ` [U-Boot] AT91 clock and timer cleanups Reinhard Meyer
2010-10-04 8:49 ` Wolfgang Denk
2010-10-04 8:52 ` Reinhard Meyer
2010-10-04 9:03 ` Wolfgang Denk
2010-10-04 9:12 ` Reinhard Meyer
2010-10-04 14:58 ` Reinhard Meyer
2010-10-04 17:00 ` Wolfgang Denk
2010-10-04 17:15 ` Reinhard Meyer
2010-10-04 17:32 ` Wolfgang Denk
2010-10-04 19:22 ` Reinhard Meyer [this message]
2010-10-01 8:48 ` [U-Boot] ARM relocation, probably trivial mistake - back to original problem Wolfgang Denk
2010-10-01 9:50 ` Reinhard Meyer
2010-10-01 8:03 ` [U-Boot] ARM relocation, probably trivial mistake Wolfgang Denk
2010-10-01 7:51 ` Wolfgang Denk
2010-10-01 8:28 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CAA298B.5020105@emk-elektronik.de \
--to=u-boot@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox