[U-Boot] [RFC] [PATCH V2] arm: arm926ejs: use ELF relocations

[Heiko Schocher <hs@denx.de>]

Hello Reinhard,

Reinhard Meyer wrote:
> I _think_ the linker file needs a .align there:
>
> (.data ends with a non-aligned address!)

actually trying on the tx25 board, and I see a hang after
the dram output too:

DRAM:  32 MiB

I inserted a breakpoint in start.S at clear_bss, never reached...

Maybe the fixloop

start.S:
[...]
fixnext:
        str     r1, [r0]
        add     r2, r2, #8      /* each rel.dyn entry is 8 bytes */
        cmp     r2, r3
        ble     fixloop
#endif
#endif  /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */

clear_bss:

never reaches a end ... but just debugging it ...

register dump in fixloop:

TX25>ti;r
    Core number       : 0
    Core state        : debug mode (ARM)
    Debug entry cause : Single Step
    Current PC        : 0x812000d8
    Current CPSR      : 0x800000d3 (Supervisor)
GPR00: 81fbe020 81fbe1a0 81224364 812285cc
GPR04: 81ebdf88 81ebdf8c 81fe6ac8 81fbe000
GPR08: 00000017 00dbe000 812285cc 00000000
GPR12: 00000000 81ebdf88 812006f4 812000d8
PC   : 812000d8    CPSR: 800000d3
TX25>

r2 and r3 are a multiple of 8, so this must end, but never
see it ending ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany