[U-Boot] [PATCH] Fix define for MPC5121 ADS board.

[Mark Vels <mark.vels@team-embedded.nl>]

Dear Wolfgang,

On 05/10/10 20:21, Wolfgang Denk wrote:
> Dear mark.vels at team-embedded.nl,
> 
> In message <1286293579-26587-1-git-send-email-mark.vels@team-embedded.nl> you wrote:
>> Originally the Makefile defines CONFIG_ADS5121_REV2 when configuring
>> for board mpc5121ads_rev2. The config in include/configs/mpc5121ads.h
>> expects a define CONFIG_MPC5121ADS_REV2 for this.
>> Therefore there are two defines used but only 1 is defined.
>> This patch renames references to CONFIG_ADS5121_REV2 to CONFIG_MPC5121ADS_REV2
>> to have one common define.
>>
>> This patch fixes faulty mem size detection caused by wrong config in
>> include/configs/mpc5121ads.h
> 
> Thanks. But... should we not rather drop that code completely?  I
> guess the number of remaining Rev. 2 boards should be epsilon.  Do you
> think these veterans are still in use anywhere?

Hehe, well there is at least the one rev 2 board that I got from the customer on my desk at the moment. That's why I
tried to build and execute this config.

I really can't tell if there are many more around so I'd like to leave it up to the experts if it is necessary to keep
the code in. I am really glad though that it still is right now because it would have costed me a considerable amount of
time to figure out the differences between the different revs.

Best regards,

Mark