[U-Boot] [PATCH 0/4] SPI updates for v2010.10

[U-Boot] [PATCH 0/4] SPI updates for v2010.10

[Mike Frysinger]

Simple stuff already posted to the list a while ago.  I'm pretty sure
I have all the latest versions of these patches, but submitters should
probably double check ...

David Jander (1):
  sf: spansion: add support for S25FL032P parts

Graeme Smecher (1):
  sf: winbond: add support W25Q64 parts

Marc-Andr? H?bert (1):
  sf: spansion: fixing erasing when sector size >64KiB

Reinhard Meyer (1):
  sspi: add options to specify bus and mode

 common/cmd_spi.c           |   40 +++++++++++++++++++++++++---------------
 drivers/mtd/spi/spansion.c |   16 ++++++++++++----
 drivers/mtd/spi/winbond.c  |    9 +++++++++
 3 files changed, 46 insertions(+), 19 deletions(-)

-- 
1.7.3.1

[U-Boot] [PATCH 1/4] sf: winbond: add support W25Q64 parts

[Mike Frysinger]

From: Graeme Smecher <graeme.smecher@mail.mcgill.ca>

Adds support for Winbond's W25Q64 SPI flash. These devices are used on
(among others) Xilinx' SP601 and SP605 Spartan-6 evaluation boards.
Tested with "sf" commands.

Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 drivers/mtd/spi/winbond.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index ff1df25..de3aeb8 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -27,6 +27,7 @@
 #define WINBOND_ID_W25X16		0x3015
 #define WINBOND_ID_W25X32		0x3016
 #define WINBOND_ID_W25X64		0x3017
+#define WINBOND_ID_W25Q64		0x4017
 
 #define WINBOND_SR_WIP		(1 << 0)	/* Write-in-Progress */
 
@@ -77,6 +78,14 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.nr_blocks		= 128,
 		.name			= "W25X64",
 	},
+	{
+		.id			= WINBOND_ID_W25Q64,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 128,
+		.name			= "W25Q64",
+	},
 };
 
 static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout)
-- 
1.7.3.1

[U-Boot] [PATCH 2/4] sf: spansion: fixing erasing when sector size >64KiB

[Mike Frysinger]

From: Marc-Andr? H?bert <hebert.marcandre@gmail.com>

The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the sector index to be
erased which happens to be the same thing when the sector size is
64KB.

Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 drivers/mtd/spi/spansion.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index d6c1a5f..94489af 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -262,7 +262,6 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 		return -1;
 	}
 
-	len /= sector_size;
 	cmd[0] = CMD_S25FLXX_SE;
 	cmd[2] = 0x00;
 	cmd[3] = 0x00;
@@ -274,8 +273,8 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 	}
 
 	ret = 0;
-	for (actual = 0; actual < len; actual++) {
-		cmd[1] = (offset / sector_size) + actual;
+	for (actual = 0; actual < len; actual+=sector_size) {
+		cmd[1] = (offset + actual) >> 16;
 
 		ret = spi_flash_cmd(flash->spi, CMD_S25FLXX_WREN, NULL, 0);
 		if (ret < 0) {
@@ -298,7 +297,7 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 	}
 
 	debug("SF: SPANSION: Successfully erased %u bytes @ 0x%x\n",
-	      len * sector_size, offset);
+	      len, offset);
 
 	spi_release_bus(flash->spi);
 	return ret;
-- 
1.7.3.1

[U-Boot] [PATCH 3/4] sf: spansion: add support for S25FL032P parts

[Mike Frysinger]

From: David Jander <david.jander@protonic.nl>

This patch introduces an extra mask-field in spansion_spi_flash_params
to support flash chips with 1-byte extended ID (like the S25FL032P).

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 drivers/mtd/spi/spansion.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index 94489af..4c28759 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -52,6 +52,7 @@
 #define SPSN_ID_S25FL128P	0x2018
 #define SPSN_EXT_ID_S25FL128P_256KB	0x0300
 #define SPSN_EXT_ID_S25FL128P_64KB	0x0301
+#define SPSN_EXT_ID_S25FL032P		0x4d00
 
 #define SPANSION_SR_WIP		(1 << 0)	/* Write-in-Progress */
 
@@ -124,6 +125,14 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = {
 		.nr_sectors = 64,
 		.name = "S25FL128P_256K",
 	},
+	{
+		.idcode1 = SPSN_ID_S25FL032A,
+		.idcode2 = SPSN_EXT_ID_S25FL032P,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 64,
+		.name = "S25FL032P",
+	},
 };
 
 static int spansion_wait_ready(struct spi_flash *flash, unsigned long timeout)
-- 
1.7.3.1

[U-Boot] [PATCH 4/4] sspi: add options to specify bus and mode

[Mike Frysinger]

From: Reinhard Meyer <u-boot@emk-elektronik.de>

and clean up error messages and help,
removed pointless debug() call.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 common/cmd_spi.c |   40 +++++++++++++++++++++++++---------------
 1 files changed, 25 insertions(+), 15 deletions(-)

diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index bafa217..8c623c9 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -47,7 +47,9 @@
 /*
  * Values from last command.
  */
-static unsigned int	device;
+static unsigned int	bus;
+static unsigned int	cs;
+static unsigned int	mode;
 static int   		bitlen;
 static uchar 		dout[MAX_SPI_BYTES];
 static uchar 		din[MAX_SPI_BYTES];
@@ -78,8 +80,18 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	if ((flag & CMD_FLAG_REPEAT) == 0)
 	{
-		if (argc >= 2)
-			device = simple_strtoul(argv[1], NULL, 10);
+		if (argc >= 2) {
+			mode = CONFIG_DEFAULT_SPI_MODE;
+			bus = simple_strtoul(argv[1], &cp, 10);
+			if (*cp == ':') {
+				cs = simple_strtoul(cp+1, &cp, 10);
+			} else {
+				cs = bus;
+				bus = CONFIG_DEFAULT_SPI_BUS;
+			}
+			if (*cp == '.');
+				mode = simple_strtoul(cp+1, NULL, 10);
+		}
 		if (argc >= 3)
 			bitlen = simple_strtoul(argv[2], NULL, 10);
 		if (argc >= 4) {
@@ -91,7 +103,7 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				if(tmp > 15)
 					tmp -= ('a' - 'A');
 				if(tmp > 15) {
-					printf("Hex conversion error on %c, giving up.\n", *cp);
+					printf("Hex conversion error on %c\n", *cp);
 					return 1;
 				}
 				if((j % 2) == 0)
@@ -103,24 +115,20 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 	if ((bitlen < 0) || (bitlen >  (MAX_SPI_BYTES * 8))) {
-		printf("Invalid bitlen %d, giving up.\n", bitlen);
+		printf("Invalid bitlen %d\n", bitlen);
 		return 1;
 	}
 
-	/* FIXME: Make these parameters run-time configurable */
-	slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, device, 1000000,
-			CONFIG_DEFAULT_SPI_MODE);
+	slave = spi_setup_slave(bus, cs, 1000000, mode);
 	if (!slave) {
-		printf("Invalid device %d, giving up.\n", device);
+		printf("Invalid device %d:%d\n", bus, cs);
 		return 1;
 	}
 
-	debug ("spi chipsel = %08X\n", device);
-
 	spi_claim_bus(slave);
 	if(spi_xfer(slave, bitlen, dout, din,
 				SPI_XFER_BEGIN | SPI_XFER_END) != 0) {
-		printf("Error with the SPI transaction.\n");
+		printf("Error during SPI transaction\n");
 		rcode = 1;
 	} else {
 		for(j = 0; j < ((bitlen + 7) / 8); j++) {
@@ -138,9 +146,11 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 U_BOOT_CMD(
 	sspi,	5,	1,	do_spi,
-	"SPI utility commands",
-	"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
-	"<device>  - Identifies the chip select of the device\n"
+	"SPI utility command",
+	"[<bus>:]<cs>[.<mode>] <bit_len> <dout> - Send and receive bits\n"
+	"<bus>     - Identifies the SPI bus\n"
+	"<cs>      - Identifies the chip select\n"
+	"<mode>    - Identifies the SPI mode to use\n"
 	"<bit_len> - Number of bits to send (base 10)\n"
 	"<dout>    - Hexadecimal string that gets sent"
 );
-- 
1.7.3.1

[U-Boot] [PATCH 0/4] SPI updates for v2010.10

[Reinhard Meyer]

Dear Mike Frysinger,
> Simple stuff already posted to the list a while ago.  I'm pretty sure
> I have all the latest versions of these patches, but submitters should
> probably double check ...
You might want to look at my V5 Patch of SPI table driven probing and
RAMTRON support. Its V4 with your requests executed:)

I posted that yesterday, I am still not happy with git send-email
(or that with me), so you were not in the CC and the three e-Mails don't
share the same Id.

Best Regards,
Reinhard

[U-Boot] [PATCH 2/4] sf: spansion: fixing erasing when sector size >64KiB

[Sergei Shtylyov]

Hello.

On 06-10-2010 11:37, Mike Frysinger wrote:

> From: Marc-Andr? H?bert<hebert.marcandre@gmail.com>

> The spansion_erase currently only works when the sector size is 64KB.
> cmd[1] should contain the higher 8 bit of the 24 bit address of the
> sector to be erased. Currently it is holding the sector index to be
> erased which happens to be the same thing when the sector size is
> 64KB.

> Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> ---
>   drivers/mtd/spi/spansion.c |    7 +++----
>   1 files changed, 3 insertions(+), 4 deletions(-)

> diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
> index d6c1a5f..94489af 100644
> --- a/drivers/mtd/spi/spansion.c
> +++ b/drivers/mtd/spi/spansion.c
[...]
> @@ -274,8 +273,8 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
>   	}
>
>   	ret = 0;
> -	for (actual = 0; actual<  len; actual++) {
> -		cmd[1] = (offset / sector_size) + actual;
> +	for (actual = 0; actual<  len; actual+=sector_size) {

    Please put spaces around += to keep the style consistent.

WBR, Sergei

[U-Boot] [PATCH 0/4] SPI updates for v2010.10

[Mike Frysinger]

On Wednesday, October 06, 2010 03:41:18 Reinhard Meyer wrote:
> Dear Mike Frysinger,
> > Simple stuff already posted to the list a while ago.  I'm pretty sure
> > I have all the latest versions of these patches, but submitters should
> > probably double check ...
> 
> You might want to look at my V5 Patch of SPI table driven probing and
> RAMTRON support. Its V4 with your requests executed:)

yes, i saw you posted that, but i wanted to get these fixes out first in case 
those didnt work out for the merge window
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20101006/1e451d33/attachment.pgp 

[U-Boot] [PATCH 2/4 v2] sf: spansion: fixing erasing when sector size >64KiB

[Mike Frysinger]

From: Marc-Andr? H?bert <hebert.marcandre@gmail.com>

The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the sector index to be
erased which happens to be the same thing when the sector size is
64KB.

Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
v2
	- fix style pointed out by Sergei Shtylyov

 drivers/mtd/spi/spansion.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index d6c1a5f..d9d794a 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -262,7 +262,6 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 		return -1;
 	}
 
-	len /= sector_size;
 	cmd[0] = CMD_S25FLXX_SE;
 	cmd[2] = 0x00;
 	cmd[3] = 0x00;
@@ -274,8 +273,8 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 	}
 
 	ret = 0;
-	for (actual = 0; actual < len; actual++) {
-		cmd[1] = (offset / sector_size) + actual;
+	for (actual = 0; actual < len; actual += sector_size) {
+		cmd[1] = (offset + actual) >> 16;
 
 		ret = spi_flash_cmd(flash->spi, CMD_S25FLXX_WREN, NULL, 0);
 		if (ret < 0) {
@@ -298,7 +297,7 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len)
 	}
 
 	debug("SF: SPANSION: Successfully erased %u bytes @ 0x%x\n",
-	      len * sector_size, offset);
+	      len, offset);
 
 	spi_release_bus(flash->spi);
 	return ret;
-- 
1.7.3.1

[U-Boot] Pull request u-boot-blackfin.git (sf branch)

[Mike Frysinger]

The following changes since commit d6288664743cdd4824cb877ca424619c827c1256:

  Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2010-10-05 14:42:32 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-blackfin.git sf

David Jander (1):
      sf: spansion: add support for S25FL032P parts

Graeme Smecher (1):
      sf: winbond: add support W25Q64 parts

Marc-Andr? H?bert (1):
      sf: spansion: fixing erasing when sector size >64KiB

Reinhard Meyer (1):
      sspi: add options to specify bus and mode

 common/cmd_spi.c           |   40 +++++++++++++++++++++++++---------------
 drivers/mtd/spi/spansion.c |   16 ++++++++++++----
 drivers/mtd/spi/winbond.c  |    9 +++++++++
 3 files changed, 46 insertions(+), 19 deletions(-)

[U-Boot] Pull request u-boot-blackfin.git (sf branch)

[Wolfgang Denk]

Dear Mike Frysinger,

In message <1286503069-17423-1-git-send-email-vapier@gentoo.org> you wrote:
> The following changes since commit d6288664743cdd4824cb877ca424619c827c1256:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2010-10-05 14:42:32 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-blackfin.git sf
> 
> David Jander (1):
>       sf: spansion: add support for S25FL032P parts
> 
> Graeme Smecher (1):
>       sf: winbond: add support W25Q64 parts
> 
> Marc-Andr? H?bert (1):
>       sf: spansion: fixing erasing when sector size >64KiB
> 
> Reinhard Meyer (1):
>       sspi: add options to specify bus and mode
> 
>  common/cmd_spi.c           |   40 +++++++++++++++++++++++++---------------
>  drivers/mtd/spi/spansion.c |   16 ++++++++++++----
>  drivers/mtd/spi/winbond.c  |    9 +++++++++
>  3 files changed, 46 insertions(+), 19 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A committee is a life form with six or more legs and no brain.
                              -- Lazarus Long, "Time Enough For Love"