From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Wed, 06 Oct 2010 12:37:15 +0200
Subject: [U-Boot] USB: EHCI reports EHCI fail timeout STD_ASS reset
In-Reply-To: <4CAB2838.7030304@denx.de>
References: <4CAB2838.7030304@denx.de>
Message-ID: <4CAC515B.1010300@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Stefano Babic wrote:
> Hi all,
> 
> I am adding EHCI support to the MX.31 Soc. I got an error from the
> ehci-hcd controller, that seems (apparently!) to not depend by the Soc I
> am using.

In the meantime I discovered this is an HW failure - with an external
USB HUB the problem disappears.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================