* [U-Boot] Observation: GCC-4.3.5 and U-Boot (arm, reloc) not working
@ 2010-10-11 8:05 Reinhard Meyer
2010-10-11 9:13 ` [U-Boot] Followup: " Reinhard Meyer
0 siblings, 1 reply; 2+ messages in thread
From: Reinhard Meyer @ 2010-10-11 8:05 UTC (permalink / raw)
To: u-boot
Hello,
I just have built gcc-4.3.5 for arm-eabi. When I compile u-boot with it,
it stops after the DRAM: 64 MiB. I _assume_ that relocation does not work.
I do not have time right now to further investigate this issue, but if
someone else finds the same problem, this might be an issue worth
investigating.
Reinhard
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Followup: GCC-4.3.5 and U-Boot (arm, reloc) not working
2010-10-11 8:05 [U-Boot] Observation: GCC-4.3.5 and U-Boot (arm, reloc) not working Reinhard Meyer
@ 2010-10-11 9:13 ` Reinhard Meyer
0 siblings, 0 replies; 2+ messages in thread
From: Reinhard Meyer @ 2010-10-11 9:13 UTC (permalink / raw)
To: u-boot
Reinhard Meyer schrieb:
> Hello,
>
> I just have built gcc-4.3.5 for arm-eabi. When I compile u-boot with it,
> it stops after the DRAM: 64 MiB. I _assume_ that relocation does not work.
>
> I do not have time right now to further investigate this issue, but if
> someone else finds the same problem, this might be an issue worth
> investigating.
Followup:
Kernel compiles and works with gcc 4.3.5
Linux version 2.6.36-rc7+ (reinhard at sieb) (gcc version 4.3.5 (Buildroot 2010.11-git) ) #1 Mon Oct 11 10:37:52 CEST 2010
That _could_ indicate that the ARM u-boot relocation method is toolchain sensitive.
Reinhard
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-10-11 9:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-11 8:05 [U-Boot] Observation: GCC-4.3.5 and U-Boot (arm, reloc) not working Reinhard Meyer
2010-10-11 9:13 ` [U-Boot] Followup: " Reinhard Meyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox