[U-Boot] [PATCH] mpc5xxx_fec: add call to reset_phy() after PHY initialization

[Ben Warren <biggerbadderben@gmail.com>]

  Hi Ilya,

On 8/19/2010 2:09 AM, Ilya Yanok wrote:
> Some boards need their board-specific PHY quirks to be called
> to PHY to work normally. As mpc5xxx_fec driver uses on demand
> PHY initialization and can even reinit PHY during normal operation
> we can't count on reset_phy() call from arch/<arch>/lib/board.c
> (it is most likely called _before_ we init the PHY from the
> driver) so we need to add call to reset_phy() directly in the
> driver.
>
> Cc: Ben Warren<biggerbadderben@gmail.com>
> Signed-off-by: Ilya Yanok<yanok@emcraft.com>
> ---
>   drivers/net/mpc5xxx_fec.c |    7 +++++++
>   1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
> index c88e596..bc8c922 100644
> --- a/drivers/net/mpc5xxx_fec.c
> +++ b/drivers/net/mpc5xxx_fec.c
> @@ -250,6 +250,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
>   	mpc5xxx_fec_init_phy(dev, bis);
>
>   	/*
> +	 * Call board-specific PHY fixups (if any)
> +	 */
> +#ifdef CONFIG_RESET_PHY_R
> +	reset_phy();
> +#endif
> +
> +	/*
>   	 * Initialize RxBD/TxBD rings
>   	 */
>   	mpc5xxx_fec_rbd_init(fec);
Applied to net repo.  Please accept my sincere apologies for taking so 
long to process.

regards,
Ben