[U-Boot] [GIT PULL] Pull request: u-boot-imx

Wolfgang Denk
2010-10-19T18:58:36Z

Dear Stefano Babic,

In message <4CBDA6A2.5010806@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull from u-boot-imx.
>
> The following changes since commit cacc342d5aa311673efdc05770cb53246dd41c9f:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-17
> 20:25:05 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> Jason Liu (2):
> MX5: rename mx51 to mx5
> MX5: Remove dead code with ENABLE_IMPRECISE_ABORT
>
> Magnus Lilja (1):
> i.MX31: Fix Litekit board to use new ARM relocation support.
>
> Stefano Babic (1):
> MX31: add delay between USB port setup and reset
>
> Wolfgang Denk (1):
> QONG: fix and update board config file
>
> arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42
> ++++++++++----------
> arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +-
> arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 14 -------
> arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 ++++++++-----
> arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 ++--
> arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0
> .../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 ++--
> .../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +-
> .../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 0
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/logicpd/imx31_litekit/config.mk | 2 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 10 ++++-
> board/ttcontrol/vision2/vision2.c | 2 +-
> boards.cfg | 4 +-
> drivers/usb/host/ehci-mxc.c | 2 +
> include/configs/imx31_litekit.h | 7 +++
> include/configs/mx51evk.h | 4 +-
> include/configs/qong.h | 32 +++++++--------
> include/configs/vision2.h | 4 +-
> 25 files changed, 90 insertions(+), 87 deletions(-)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/Makefile (100%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/clock.c (85%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c (99%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S (95%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/soc.c (81%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/timer.c (92%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/asm-offsets.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/clock.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/crm_regs.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/imx-regs.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/iomux.h (98%)
> rename arch/arm/include/asm/{arch-mx51/mx51_pins.h =>
> arch-mx5/mx5x_pins.h} (99%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/sys_proto.h (100%)

Applied, thanks.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is practically impossible to teach good programming style to stu-
dents that have had prior exposure to BASIC: as potential programmers
they are mentally mutilated beyond hope of regeneration. - Dijkstra