From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 19 Oct 2010 13:07:21 +0200 Subject: [U-Boot] mx51evk build failure In-Reply-To: <20101019105015.GA5729@bee.dooz.org> References: <20101019105015.GA5729@bee.dooz.org> Message-ID: <4CBD7BE9.5030102@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/19/2010 12:50 PM, Lo?c Minier wrote: > Hey there > > I'm following the u-boot list and see that some mx5 changes are being > pushed regularly to u-boot.git master, but the board doesn't build for > me (make CROSS_COMPILE=arm-linux-gnueabi- mrproper mx51evk_config + > make CROSS_COMPILE=arm-linux-gnueabi- all), it fails with board.c:459: > error: ?CONFIG_SYS_SDRAM_BASE? undeclared; I guess this is because the > board needs porting to the relocation changes? Yes. I have at least a patch that fix the compiling issues and I could test on a 2.5 board. However, it sets still CONFIG_SYS_ARM_WITHOUT_RELOC. Hoever, it is ugly that the board does not compile, and I weill send in anyway the patch to the ML. > > I just wonder how the various patches related to mx5 get built; do you > revert the relocation changes locally as a workaround before build? No. There is a second MX5 board in mainline, that I used for testing. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================