[U-Boot] [PATCH 0/3] new BSP for at91rm9200ek

[Reinhard Meyer <u-boot@emk-elektronik.de>]

Dear Andreas Bie?mann,
> This patch series introduce new board support for at91rm9200ek.
> The derived code is now converted to new at91 code. Arm relocation is also
> implemented.
> 
> There where some tradeoffs regarding device support. Currently the code basis
> does not support all devices supported before. This includes
>  a) remove support for dataflash since i can not test it (yet, should follow
>     in some weeks)
>  b) preloader support is disabled since NOR booting does not need any first
>     stage loader
>  c) MMC/SD-card is currently not supported (but was not before)
> 
> Next steps are:
>  - get dataflash running
>  - remove at91rm9200_usart driver (should merge with atmel_usart)
>  - support MMC/SD-Card (also merge with current AT91/AVR32 implementation)
>  - merge emac/macb
> 
> Andreas Bie?mann (3):
>   at91rm9200ek: convert to at91
>   at91rm9200: enable USB support
>   at91rm9200ek: enbable USB support
> 
>  MAINTAINERS                               |    4 +
>  arch/arm/include/asm/arch-at91/hardware.h |    1 +
>  board/atmel/at91rm9200ek/Makefile         |    1 -
>  board/atmel/at91rm9200ek/at91rm9200ek.c   |   58 ++-----
>  board/atmel/at91rm9200ek/config.mk        |    3 +-
>  board/atmel/at91rm9200ek/led.c            |   58 ++++----
>  board/atmel/at91rm9200ek/misc.c           |   50 ------
>  boards.cfg                                |    2 +-
>  include/configs/at91rm9200ek.h            |  233 ++++++++---------------------
>  9 files changed, 118 insertions(+), 292 deletions(-)
>  delete mode 100644 board/atmel/at91rm9200ek/misc.c
> 
Added V2 of the series to u-boot-atmel/at91.
Thanks,
Reinhard