[U-Boot] [PATCH] Kirkwood: bugfix: broken early console messages

[Heiko Schocher <hs@denx.de>]

Hello Prafulla,

Prafulla Wadaskar wrote:
> It has been observed that, the complete u-boot banner
> does not appear on the console when the system is booted
> from NAND/NOR/SPI flash.
> 
> This patch fixes this issue on all Marvell boards by adding
> board_early_init_f() support
> 
> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
> ---
>  board/Marvell/guruplug/guruplug.c               |    6 +++++-
>  board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c |    6 +++++-
>  board/Marvell/openrd_base/openrd_base.c         |    6 +++++-
>  board/Marvell/rd6281a/rd6281a.c                 |    6 +++++-
>  board/Marvell/sheevaplug/sheevaplug.c           |    6 +++++-
>  include/configs/mv-common.h                     |    1 +
>  6 files changed, 26 insertions(+), 5 deletions(-)
> 
> diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
> index 4df4e9b..1f0e67a 100644
> --- a/board/Marvell/guruplug/guruplug.c
> +++ b/board/Marvell/guruplug/guruplug.c
> @@ -30,7 +30,7 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> -int board_init(void)
> +int board_early_init_f(void)
>  {

Maybe, you can make a mv-common.c which contains this
(and maybe other mv common?) functions?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany