From mboxrd@z Thu Jan 1 00:00:00 1970 From: Reinhard Meyer Date: Thu, 28 Oct 2010 09:26:42 +0200 Subject: [U-Boot] [PATCH V6] MTD/SPI: add support for Ramtron FRAMs In-Reply-To: <201010280306.01555.vapier@gentoo.org> References: <1287063201-18858-1-git-send-email-u-boot@emk-elektronik.de> <201010142043.14403.vapier@gentoo.org> <201010280306.01555.vapier@gentoo.org> Message-ID: <4CC925B2.1090107@emk-elektronik.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Mike Frysinger, > On Thursday, October 14, 2010 20:43:13 Mike Frysinger wrote: >> On Thursday, October 14, 2010 09:33:21 Reinhard Meyer wrote: >>> Supports most types that support Read-Id and the FM25H20. >>> >>> Signed-off-by: Reinhard Meyer >>> --- >>> changes since V5: rebased on current MASTER >> >> this matches what's already in my branch, so if you've tested this, i'll >> push it over to Wolfgang > > ping ... Sorry I missed that this was a question :) Sure it works here, and I would not post patches that are not tested :) However do to current lack of boards equipped with a range of different Ramtron parts I could only test the FM25H20 case which is the non-jedec variant. As soon as I get hold of another jedec conformant Ramtron part, I'll try it, and if that unexpectedly does not get recognized I'll submit a fix. Best Regards, Reinhard