[U-Boot] CONFIG_SKIP_RELOCATE_UBOOT still used?

[Alexander Holler <holler@ahsoftware.de>]

Am 28.10.2010 13:16, schrieb Reinhard Meyer:
>> CONFIG_SKIP_RELOCATE_UBOOT
>
> The old way in ARM before ELF relocation was introduced. A misnomer because it seemingly
> skipped the *COPY* of the image from whereever it was loaded to the TEXT_BASE
> location. There was no real *RELOCATION* done there. This define probably does not work
> anymore. It was set on ARM boards where a preloader did load u-boot to the
> TEXT_BASE address.
>
> In an up to date ARM system all those defines MUST NOT be set.

Thanks for that explanation.

In regard to CONFIG_SKIP_RELOCATE_UBOOT I've hit a typo in 
arch/arm/cpu/arm926ejs/start.S while trying to use this define to build 
a non relocatable u-boot. In line 383 there is

ldr     pc, r0

which seems to should be

ldr pc, [r0]

But after fixing that I've just run into other problems compiling u-boot 
with CONFIG_SKIP_RELOCATE_UBOOT defined. I don't send a patch, because I 
assume that code is just dead will be eliminated in the near future.

Regards,

Alexander