[U-Boot] [RFC] arm926ejs: fix jump to RAM nand_boot

[Albert ARIBAUD <albert.aribaud@free.fr>]

Le 02/11/2010 10:56, Sughosh Ganu a ?crit :
> hi Albert,
>
> On Tue Nov 02, 2010 at 10:47:49AM +0100, Albert ARIBAUD wrote:
>
>> Now a solution would be that the actual u-boot size be flashed along
>> with it, for instance as a literal defined as '.word _end - _start'
>> right after the vectors. The SPL could load a first NAND block, read the
>> literal, round it to a multiple of NAND blocks by default, and then read
>> this quantity.
>>
>> That would remove the dependency at the cost of extra code in the SPL,
>> though, and not all boards might be able to afford it.
>
>    Another issue is that the nand_spl might be compiled and flashed
>    to the NAND as a separate entity, using a separate flashing
>    mechanism. If we use the dynamic calculation of the u-boot size,
>    this would necessitate building and flashing the nand_spl each time
>    along with u-boot.

Not with the solution I describe, as the once-flashed SPL would fetch 
the actual size from the actual u-boot.

> -sughosh

Amicalement,
-- 
Albert.