[U-Boot] [PATCH] powerpc: do not fixup NULL ptrs

[Andre Schwarz <andre.schwarz@matrix-vision.de>]

>> Andy,
>>      
>>>> Sure, but until freescale or someone else with eq. and motivation
>>>> researches it, we are stuck. I am not sure anyone else has tried
>>>> 83xx based boards yet. If someone has please report. Also
>>>> include weather booted from NAND or NOR, CPU type(e300cX) and
>>>> what reset vector is used.
>>>>
>>>>          
>>> I have a couple of Freescale reference boards here (8313ERDB and
>>> 8349-MITX-GP).  I'm not a powerpc expert by any means but if there are some
>>> (simple) tests you would like me to run on them then I will see if I can
>>> find some time.
>>>
>>>        
>> I can see this issues only on MPC837x, i.e. *not* on MPC834x.
>>      
> -E_TOO_LITTLE_INFO
>    

sorry.

I meant that e.g. mvblm7 board (=MPC8343) works like a charm from 
current mainline U-Boot.

My latest MPC8377 board does not even start without your suggested 4 nops.
It does not start (i.e. serial line completely dead) with any USB 
functionality defined.
I also have random hangs depending on activated code, e.g. 
CONFIG_CMD_something or SPI drivers etc.

To me it looks like an alignment problem *somewhere*.


As said before I'm still digging and try to get more useful information.

Do you think porting the board to an earlier (maybe 2009) version is 
worth a try ?
I could start bisecting if we could get a stable version.


Regards,
Andr?

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner