[U-Boot] [PATCH V3 1/3] arm926ejs: fix linker file for newer ld support

[Albert ARIBAUD <albert.aribaud@free.fr>]

Le 04/11/2010 14:18, Alexander Holler a ?crit :
> Am 04.11.2010 13:55, schrieb Albert ARIBAUD:
>
>> Then please do test this V3 patch and verify if the issues you raise
>> still apply or are fixed.
>
> V3 failed using my relocation-test-patch (and resulted in the same
> problems as without any relocation patch). Therefor I've posted the
> output. I though it was clear that I've used v3 (because of the subject).

The body kept talking about V1 and did mention that you didn't look at 
V3, so I wanted to make sure there was no mistake here.

>> Please make sure to indicate which source commit you're testing on and
>> which toolchain you're using, and to compare with V3 results.
>
> I've created a tarball with the patches for the DockStar I'm currently
> using for those tests.
>
> It is available here:
>
> http://ahsoftware.de/dockstar_uboot_patches.tar.bz2
>
> Regards,
>
> Alexander

You're still using a locally-built toolchain different from CS and ELDK 
toolhcains that were tested so far, right? There is a warning at the 
linker stage in the build log you sent me:

ld: warning: creating a DT_TEXTREL in object.

which I don't have using the CS 2010q1 toolchain.

Can you please checkout the pristine master branch of u-boot and build 
sheevaplug with just my V3 patch applied and you toolchain, and tell me 
if you see this warning?

Amicalement,
-- 
Albert.