From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andre Schwarz <andre.schwarz@matrix-vision.de>
Date: Fri, 05 Nov 2010 10:21:53 +0100
Subject: [U-Boot] NAND on eLBC
Message-ID: <4CD3CCB1.4080206@matrix-vision.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Scott,

looks like I made a mistake on current MPC8377 NAND wiring.

Nand-Flash "write enable" is wired to LFWE1 ... I connected each WE to 
its corresponding CS, i.e. :

- CS0/WE0 -> Nor Flash
- CS1/WE1 -> Nand Flash
- CS2/WE2 -> MRAM

Am I assuming right that FCM can only use WE0 ?

Do you see any issue with connecting all devices to WE0 since they have 
distinct chip selects ?


Regards,
Andr?

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner