From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 21 Nov 2010 18:29:54 +0100 Subject: [U-Boot] [PATCH v7 1/1] imx: Get fec mac address from fuse In-Reply-To: <1290159955-12296-1-git-send-email-r64343@freescale.com> References: <1290159955-12296-1-git-send-email-r64343@freescale.com> Message-ID: <4CE95712.6070507@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/19/2010 10:45 AM, Jason Liu wrote: > The patch is to support getting FEC MAC address from fuse bank. > > Signed-off-by: Jason Liu > > --- > Changes for v2: > - correct the mac address byte order according to review comments > - add memset(edev, 0. sizeof(*edev)) when do fec_probe, > - fix some code comments > Changes for v3: > - rebase > - address the comments of Stefano, make the imx_get_mac_from_fuse(), > declared independently inside each imx-regs.h to make it specific > for each processor, because it accesses to different structures. > - address the comments of Wolfgang and Stefano, use struct to access > mac_addr fuse. > Changes for v4: > - Address the comments of Wolfgang, use fuse_regs instead of bank addres > and change from fuse1_6 to fuse0_5 naming convention and use fuse_bank0_regs > instead of fuse_bank0 to kill misleading. > Changes for v5: > - Fix the typo error of fuse5_31[0x11] as Wolfgang point out > - Change the print message "got MAC address from EEPROM to > "got MAC address from fuse" which comply with this commit title. > Changes for v6: > - Fix the mx27 res0 array size issue > - Fix one coding style issue > - use 0xff mask to clear that only the LSB of the read value is taken > Changes for v7: > - Fix the mx27 mac_addr offset > - checkpatch > --- > arch/arm/cpu/arm926ejs/mx25/generic.c | 12 ++++++++++ > arch/arm/cpu/arm926ejs/mx27/generic.c | 12 ++++++++++ > arch/arm/cpu/armv7/mx5/soc.c | 14 ++++++++++++ > arch/arm/include/asm/arch-mx25/imx-regs.h | 19 +++++++++------ > arch/arm/include/asm/arch-mx27/imx-regs.h | 20 +++++++++++------ > arch/arm/include/asm/arch-mx5/imx-regs.h | 34 +++++++++++++++++++++++++++++ > drivers/net/fec_mxc.c | 17 +------------ > 7 files changed, 98 insertions(+), 30 deletions(-) Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================