[U-Boot] [PATCH V2 1/2] Davinci 8xx: Move common functions to share code

[Stefano Babic <sbabic@denx.de>]

On 11/19/2010 04:16 PM, Ben Gardiner wrote:
> You're very welcome. I'm glad you found it useful.
> 
> We are happy to see the omap-L138 support in u-boot moving forward. We
> would like to get either SD or USB (or both) omapL138 support upstream
> next. Does the ea20 have USB or SD?

Hi Ben,

there is at the moment no plan to add support to ea20 for USB or SD.
However, Things could be changed when a new revision of hardware will
become available (at the beginning of next years).

Patches to add SD support was already sent to the ML, I see the ACK by
the MMC maintainer:

http://www.mail-archive.com/u-boot at lists.denx.de/msg32375.html

It seems to me the only reason the patch did not go to the mainline was
to understand who should merge it and then push to Wolfgang.

Probably what we need is to check again the status of this patch. I
cannot find it on patchwork, it looks like it was missed ;-(.

I see a patch to enable USB in da850evm, too::

http://patchwork.ozlabs.org/patch/71817/

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================