[U-Boot] Pull request: u-boot-arm

Wolfgang Denk
2010-10-13T19:00:26Z

In message <20101013184030.B935C1365CC@gemini.denx.de> you wrote:
> The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
>
> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Albert Aribaud (6):
> arm: bugfix: replace ble with blo in start.S files
> orion5x: fix relocation-incompatible code
> mvsata_ide: adjust port init sequence
> orion5x: optimize window size computation
> mvsata_ide: adjust port init sequence
> orion5x: optimize window size computation
>
> Alexander Stein (1):
> at91: Add arch_preboot_os which disables PIT in a faster way
>
> Andreas Bie?mann (6):
> at91_emac.c: fix 'Warning: eth device name has a space!'
> at91_emac.c: poll for IDLE when writing PHY
> at91_emac.h: fix typo in register definition
> atmel_usart: change register access to C structure
> arch/arm/include/asm/sizes.h: cleanups
> board/armltd/integrator/split_by_variant.sh: fix 'echo -n'
>
> Ben Gardiner (1):
> ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC
>
> Heiko Schocher (1):
> ARM: relocation: fix typo in comment
>
> Matt Waddel (2):
> ARMV7: Versatile Express Coretile CortexA9x4 support
> ARMV7: Fixed baudrate setting in pl01x driver
>
> Prafulla Wadaskar (8):
> Kirkwood: print_cpuinfo fixed for valid devid revid
> Kirkwood: dram_init is moved to dram.c
> kirkwood: added common config file mv-common.h
> Kirkwood: Changes specific to ARM relocation support
> Kirkwood: print_cpuinfo fixed for valid devid revid
> Kirkwood: dram_init is moved to dram.c
> kirkwood: added common config file mv-common.h
> Kirkwood: Changes specific to ARM relocation support
>
> Reinhard Meyer (1):
> AT91: convert cpu.c to struct SoC access
>
> Stefano Babic (10):
> Use common function to set GPIOs for MX3 and MX5
> ARM: Use syslib functions for all CORTEXA8
> MX51: Added pins definition to set up pads
> MX51: add structure to access System Reset Controller
> MXC: Add watchdog support to serial driver
> MX51: Drop unused header file for mx51evk
> MXC: Correct SPI_CPOL setting in SPI driver
> MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
> MX51: Register definitions cannot be included in board config file
> MX51: Support for TTECH vision2 board
>
> Wolfgang Denk (3):
> Merge branch 'master' of git://git.denx.de/u-boot-imx
> Merge branch 'at91' of git://git.denx.de/u-boot-atmel
> Merge branch 'master' of git://git.denx.de/u-boot-marvell
>
> MAINTAINERS | 5 +
> MAKEALL | 1 +
> arch/arm/cpu/arm1136/start.S | 8 +-
> arch/arm/cpu/arm1176/start.S | 10 +-
> arch/arm/cpu/arm720t/start.S | 10 +-
> arch/arm/cpu/arm920t/start.S | 10 +-
> arch/arm/cpu/arm925t/start.S | 10 +-
> arch/arm/cpu/arm926ejs/at91/cpu.c | 48 +-
> arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 34 +-
> arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 +
> arch/arm/cpu/arm926ejs/orion5x/cpu.c | 112 ++--
> arch/arm/cpu/arm926ejs/orion5x/timer.c | 6 +-
> arch/arm/cpu/arm926ejs/start.S | 10 +-
> arch/arm/cpu/arm946es/start.S | 8 +-
> arch/arm/cpu/arm_intcm/start.S | 10 +-
> arch/arm/cpu/armv7/Makefile | 3 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 1 -
> arch/arm/cpu/armv7/start.S | 8 +-
> arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0
> arch/arm/cpu/ixp/start.S | 10 +-
> arch/arm/cpu/lh7a40x/start.S | 11 +-
> arch/arm/cpu/pxa/start.S | 8 +-
> arch/arm/cpu/s3c44b0/start.S | 12 +-
> arch/arm/cpu/sa1100/start.S | 10 +-
> arch/arm/include/asm/arch-arm925t/sizes.h | 50 --
> arch/arm/include/asm/arch-arm926ejs/sizes.h | 51 --
> arch/arm/include/asm/arch-armv7/sysctrl.h | 70 ++
> .../arm/include/asm/arch-armv7/systimer.h | 54 +-
> .../arm/include/asm/arch-armv7/wdt.h | 57 +-
> arch/arm/include/asm/arch-at91/at91_emac.h | 2 +-
> arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +
> arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +-
> arch/arm/include/asm/arch-mx31/mx31.h | 25 -
> arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +-
> arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++
> arch/arm/include/asm/arch-mx51/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap/sizes.h | 52 --
> arch/arm/include/asm/arch-omap24xx/omap2420.h | 2 +-
> arch/arm/include/asm/arch-omap24xx/sizes.h | 49 --
> arch/arm/include/asm/arch-orion5x/cpu.h | 1 +
> arch/arm/include/asm/sizes.h | 5 +-
> board/Marvell/guruplug/guruplug.c | 11 -
> board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 -
> board/Marvell/openrd_base/openrd_base.c | 11 -
> board/Marvell/rd6281a/rd6281a.c | 11 -
> board/Marvell/sheevaplug/sheevaplug.c | 11 -
> board/armltd/integrator/split_by_variant.sh | 129 ++--
> board/armltd/vexpress/Makefile | 49 ++
> board/armltd/vexpress/ca9x4_ct_vxp.c | 220 ++++++
> board/armltd/vexpress/config.mk | 23 +
> board/armltd/vexpress/u-boot.lds | 65 ++
> board/davedenx/qong/qong.c | 29 +-
> board/freescale/mx51evk/mx51evk.c | 2 -
> board/ttcontrol/vision2/Makefile | 48 ++
> board/ttcontrol/vision2/config.mk | 25 +
> board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++
> board/ttcontrol/vision2/vision2.c | 711 ++++++++++++++++> ++++
> boards.cfg | 2 +
> drivers/block/mvsata_ide.c | 42 +-
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +-
> drivers/misc/fsl_pmic.c | 10 +-
> drivers/net/at91_emac.c | 22 +-
> drivers/serial/atmel_usart.c | 36 +-
> drivers/serial/atmel_usart.h | 56 +-
> drivers/serial/serial_mxc.c | 7 +-
> drivers/serial/serial_pl01x.c | 93 +--
> drivers/spi/mxc_spi.c | 168 ++++--
> include/configs/ca9x4_ct_vxp.h | 196 ++++++
> include/configs/da850evm.h | 1 -
> include/configs/guruplug.h | 103 +---
> include/configs/h2_p2_dbg_board.h | 2 +-
> include/configs/imx27lite-common.h | 3 +-
> include/configs/imx31_litekit.h | 4 +-
> include/configs/imx31_phycore.h | 2 +-
> include/configs/keymile-common.h | 1 +
> include/configs/km_arm.h | 2 +-
> include/configs/mv-common.h | 230 +++++++
> include/configs/mv88f6281gtw_ge.h | 120 +---
> include/configs/mx31ads.h | 4 +-
> include/configs/mx31pdk.h | 4 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/omap1510.h | 2 +-
> include/configs/omap3_beagle.h | 3 +-
> include/configs/omap730.h | 2 +-
> include/configs/openrd_base.h | 146 +----
> include/configs/qong.h | 9 +-
> include/configs/rd6281a.h | 101 +---
> include/configs/sheevaplug.h | 104 +---
> include/configs/tx25.h | 3 +-
> include/configs/vision2.h | 214 ++++++
> include/mc13892.h | 3 +
> .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +-
> 93 files changed, 2904 insertions(+), 1345 deletions(-)
> rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
> delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h
> delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h
> create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h
> copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/systimer.h (55%)
> copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/wdt.h (55%)
> delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h
> delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h
> create mode 100644 board/armltd/vexpress/Makefile
> create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c
> create mode 100644 board/armltd/vexpress/config.mk
> create mode 100644 board/armltd/vexpress/u-boot.lds
> create mode 100644 board/ttcontrol/vision2/Makefile
> create mode 100644 board/ttcontrol/vision2/config.mk
> create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
> create mode 100644 board/ttcontrol/vision2/vision2.c
> rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
> create mode 100644 include/configs/ca9x4_ct_vxp.h
> create mode 100644 include/configs/mv-common.h
> create mode 100644 include/configs/vision2.h
> rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)

Applied.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Stupidity, like virtue, is its own reward.