[U-Boot] [PATCH] OMAP3: add CM-T35 board

[Mike Rapoport <mike@compulab.co.il>]

Hi Nishanth,
Sorry for the delay, some deadly virus has caught me and I was not really
functional last week.

On 11/24/10 04:58, Nishanth Menon wrote:
> Mike Rapoport wrote, on 11/23/2010 01:29 AM:
> minor comments follow:
> [...]
>  > diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
>  > new file mode 100644
>  > index 0000000..514017d
>  > --- /dev/null
>  > +++ b/board/cm_t35/cm_t35.h
> [..]
>> +	/*DSS*/\

[ snip ]

>> +	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
>> +	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
>> +	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
>> +	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
>> +	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
> Are you using bootlogo in CM-t35 u-boot?

Not at the moment, but we'd really like to add bootlogo support. AFAIK, some of
CM-T35 users already have the bootlogo support and therefore I'd prefer to have
the DSS pins configured.

> 
>> +	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*CLKOUT1*/\
>> +	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTD | DIS | M4)) /*green LED*/\
> might be better to state which GPIO than green led :)

The GPIO controlling the led is not available for other functionality, so I'd
prefer to keep the comment.

>> +	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
>> +	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
>> +	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
>> +	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
> 
>> +	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
>> +	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
> this tiny set probably should go along with sdrc to reflect proper 
> functional set I guess.

Agree

>> +
>> +#endif
>> diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk
>> new file mode 100644
>> index 0000000..e81e283
>> --- /dev/null
>> +++ b/board/cm_t35/config.mk
>> @@ -0,0 +1,30 @@
>> +#
>> +# (C) Copyright 2009
>> +# CompuLab, Ltd.,<www.compulab.co.il>
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> +# MA 02111-1307 USA
>> +#
>> +# Physical Address:
>> +# 8000'0000 (bank0)
>> +#
>> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
>> +# (mem base + reserved)
>> +
>> +# For use with external or internal boots.
>> +CONFIG_SYS_TEXT_BASE = 0x80008000
>> diff --git a/boards.cfg b/boards.cfg
>> index 6c2a667..e79b2d7 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -392,6 +392,7 @@ igep0020	arm	armv7		igep0020	isee		omap3
>>   igep0030	arm	armv7		igep0030	isee		omap3
>>   am3517_evm	arm	armv7		am3517evm	logicpd		omap3
>>   devkit8000	arm	armv7		devkit8000	timll		omap3
>> +cm_t35		arm	armv7		cm_t35		-		omap3
>>   omap4_panda	arm	armv7		panda		ti		omap4
>>   omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
>>   s5p_goni	arm	armv7		goni		samsung		s5pc1xx
>> diff --git a/doc/README.omap3 b/doc/README.omap3
>> index 6227151..460950d 100644
>> --- a/doc/README.omap3
>> +++ b/doc/README.omap3
>> @@ -21,6 +21,8 @@ Currently the following boards are supported:
>>
>>   * TI/Logic PD Zoom 2 [7]
>>
>> +* CompuLab Ltd. CM-T35 [8]
>> +
>>   Toolchain
>>   =========
>>
>> @@ -61,6 +63,11 @@ make
>>   make omap3_zoom2_config
>>   make
>>
>> +* CM-T35:
>> +
>> +make cm_t35_config
>> +make
>> +
>>   Custom commands
>>   ===============
>>
>> @@ -119,7 +126,7 @@ To read a bit :
>>   Acknowledgements
>>   ================
>>
>> -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
>> +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
>>   several TI employees.
>>
>>   Links
>> @@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
>>   [7] TI/Logic PD Zoom 2
>>
>>   http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
>> -[8] TI OMAP3 U-Boot:
>> +
>> +[8] CompuLab Ltd. CM-T35:
>> +
>> +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
>> +
>> +[9] TI OMAP3 U-Boot:
>>
>>   http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
>> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
>> new file mode 100644
>> index 0000000..63a4938
>> --- /dev/null
>> +++ b/include/configs/cm_t35.h
>> @@ -0,0 +1,364 @@
>> +/*
>> + * (C) Copyright 2006-2008
>> + * Texas Instruments.
>> + * Richard Woodruff<r-woodruff2@ti.com>
>> + * Syed Mohammed Khasim<x0khasim@ti.com>
>> + *
> 2010 copyright?

Yes, of course.

>> + * Configuration settings for the TI OMAP3530 Beagle board.
> 
> ^^^^ need fixes..

Will fix.

>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +/*
>> + * High Level Configuration Options
> [...]


-- 
Sincerely yours,
Mike.