From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?UTF-8?B?QW5kcmVhcyBCaWXDn21hbm4=?= <andreas.devel@googlemail.com>
Date: Wed, 01 Dec 2010 13:12:19 +0100
Subject: [U-Boot] [TEST] arm:board_init_f(): mirror BSS and check after
 each	init_fnc()
In-Reply-To: <4CF63345.9020006@free.fr>
References: <1291191050-46774-1-git-send-email-andreas.devel@googlemail.com>
	<4CF6175D.4020702@free.fr> <4CF61DDD.3060304@gmail.com>
	<4CF63345.9020006@free.fr>
Message-ID: <4CF63BA3.6020603@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Albert ARIBAUD,

Am 01.12.2010 12:36, schrieb Albert ARIBAUD:
> hi Andreas,
> 
> Le 01/12/2010 11:05, Andreas Bie?mann a ?crit :
> 
>> I can not recommend a proper place for all boards cause this parameter
>> is highly is board specific.
> 
> Understood -- each board maintainer must select an adapted location for
> the mirror.

Yes, but I have one thing to mention. This test does only detect writing
to BSS values in one of the init_sequence[] functions.

In my case I detected arch/arm/cpu/arm920t/at91/timer.c as faulty. But I
still have some issues booting at91rm9200ek from NOR flash. None of the
init_sequence[] functions writes to a BSS value in that case ... So if
the 'corrupted .dyn.rel' thing is my problem in NOR booting case
.dyn.rel got corrupted before board_init_f() or by some other function
call between for loop of init_sequence[] and relocate_code() ... I don't
know if I get this until release of v2010.12.

Maybe another maintainer is more lucky ...

regards

Andreas Bie?mann