public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jens Scharsig <js_at_ng@scharsoft.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH alternate version] at91rm9200: fix lowlevel_init() SMRDATA size
Date: Sat, 04 Dec 2010 11:53:37 +0100	[thread overview]
Message-ID: <4CFA1DB1.3010100@scharsoft.de> (raw)
In-Reply-To: <1291361167-9880-1-git-send-email-biessmann@corscience.de>

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
---

Am 03.12.2010 08:26, schrieb Andreas Bie?mann:
> SMRDATA in a/a/c/arm920t/at91/lowlevel_init.c has wrong size. This patch
> reduces it to correct size of 40 byte.
> 
> Signed-off-by: Andreas Bie?mann <biessmann@corscience.de>
> ---
> Dear all,
> 
> I thougt about a problem in lowlevel_init() cause of errornous booting from
> NOR flash on at91rm9200ek last night . This morning I detected this, but the
> patch is untested!
> I can not test it til sunday, if one can test it before please send a mail
> (Jens?).
> 
> regards
> 
> Andreas Bie?mann
> 
> arch/arm/cpu/arm920t/at91/lowlevel_init.S |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm920t/at91/lowlevel_init.S b/arch/arm/cpu/arm920t/at91/lowlevel_init.S
> index eaea9d2..6e397c2 100644
> --- a/arch/arm/cpu/arm920t/at91/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/at91/lowlevel_init.S
> @@ -65,7 +65,7 @@ LoopOsc:
>  	ldr	r0, =SMRDATA
>  	ldr	r1, _MTEXT_BASE
>  	sub	r0, r0, r1
> -	add	r2, r0, #80
> +	add	r2, r0, #40
>  pllloop:
>  	/* the address */
>  	ldr	r1, [r0], #4

The patch has no positive or negative effects. But you are right, this is an error with
unknown side effects. 

So we should resolve this in a future-proof way (see below)

 arch/arm/cpu/arm920t/at91/lowlevel_init.S |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/arm920t/at91/lowlevel_init.S b/arch/arm/cpu/arm920t/at91/lowlevel_init.S
index eaea9d2..1143c7e 100644
--- a/arch/arm/cpu/arm920t/at91/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/at91/lowlevel_init.S
@@ -65,7 +65,8 @@ LoopOsc:
 	ldr	r0, =SMRDATA
 	ldr	r1, _MTEXT_BASE
 	sub	r0, r0, r1
-	add	r2, r0, #80
+	ldr	r2, =SMRDATAE
+	add	r2, r2, r1
 pllloop:
 	/* the address */
 	ldr	r1, [r0], #4
@@ -82,8 +83,8 @@ lock:
 	bhi	lock
 	ldr	r0, =SMRDATA1
 	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #176
+	ldr	r2, =SMRDATA1E
+	add	r2, r2, r1
 sdinit:
 	/* the address */
 	ldr	r1, [r0], #4
@@ -114,6 +115,7 @@ SMRDATA:
 	.word CONFIG_SYS_PLLBR_VAL
 	.word AT91_ASM_PMC_MCKR
 	.word CONFIG_SYS_MCKR_VAL
+SMRDATAE:	
 	/* here there's a delay */
 SMRDATA1:
 	.word AT91_ASM_PIOC_ASR
@@ -160,5 +162,6 @@ SMRDATA1:
 	.word CONFIG_SYS_SDRC_MR_VAL3
 	.word CONFIG_SYS_SDRAM
 	.word CONFIG_SYS_SDRAM_VAL
+SMRDATA1E:		
 	/* SMRDATA1 is 176 bytes long */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-- 1.7.1 

  parent reply	other threads:[~2010-12-04 10:53 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-03  7:26 [U-Boot] [PATCH] at91rm9200: fix lowlevel_init() SMRDATA size Andreas Bießmann
2010-12-03 17:09 ` Jens Scharsig
2010-12-03 21:22   ` Andreas Bießmann
2010-12-04 11:37     ` Jens Scharsig
2010-12-04 12:04       ` Albert ARIBAUD
2010-12-04 13:14         ` Andreas Bießmann
2010-12-04 18:18           ` Albert ARIBAUD
2010-12-04 10:53 ` Jens Scharsig [this message]
2010-12-04 13:12   ` [U-Boot] [PATCH alternate version] " Andreas Bießmann
2010-12-04 13:19   ` Andreas Bießmann
2010-12-05  8:12   ` [U-Boot] [PATCH alternate version V2] " Jens Scharsig
2010-12-05 10:16     ` Reinhard Meyer
2010-12-06 17:36       ` Jens Scharsig
2010-12-06 21:03         ` Andreas Bießmann
2010-12-12 19:12           ` Jens Scharsig
2010-12-17  7:55             ` Reinhard Meyer
2010-12-23 11:37             ` Andreas Bießmann
2010-12-18 12:30 ` [U-Boot] [PATCH alternate V3] " Jens Scharsig
2010-12-23 11:39   ` Andreas Bießmann
2010-12-23 12:13     ` Reinhard Meyer
2010-12-23 13:05       ` Jens Scharsig
2011-04-11  9:58         ` Reinhard Meyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CFA1DB1.3010100@scharsoft.de \
    --to=js_at_ng@scharsoft.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox