[U-Boot] [PATCH v2 0/4] get at91rm9200ek working with ARM relocation

[Reinhard Meyer <u-boot@emk-elektronik.de>]

Dear Andreas Bie?mann,
> Dear all,
> 
> this is mostly a copy of
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/89888
> 
> This series have two relevant changes. Cause of defining the weak symbol
> board_reset the previous patch 'arm920t: fix linker skript for -pie linking'
> is not longer needed. So 'arm920t/at91/reset: board_reset: define weak symbol'
> is a replacement for that one.
> And second integrate the suggestion of Reinhard Meyer in
> 'arm920t/at91/timer: replace bss variables by gd'.
> 
> Andreas Bie?mann (4):
>   at91rm9200ek: add configure target for RAM boot
>   MAKEALL: fix AT91
>   arm920t/at91/reset: board_reset: define weak symbol
>   arm920t/at91/timer: replace bss variables by gd
> 
>  MAKEALL                            |   18 +++---------------
>  arch/arm/cpu/arm920t/at91/reset.c  |    8 +++++---
>  arch/arm/cpu/arm920t/at91/timer.c  |   29 ++++++++++++++---------------
>  arch/arm/include/asm/global_data.h |    1 +
>  board/atmel/at91rm9200ek/config.mk |    2 --
>  boards.cfg                         |    3 ++-
>  include/configs/at91rm9200ek.h     |   16 ++++++++++++++++
>  7 files changed, 41 insertions(+), 36 deletions(-)
>  delete mode 100644 board/atmel/at91rm9200ek/config.mk

Applied all four to u-boot-atmel/next.
Thanks,
Reinhard