* [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
@ 2010-12-05 1:27 Clint Adams
2010-12-05 17:45 ` Albert ARIBAUD
2010-12-06 9:19 ` Prafulla Wadaskar
0 siblings, 2 replies; 4+ messages in thread
From: Clint Adams @ 2010-12-05 1:27 UTC (permalink / raw)
To: u-boot
Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my
GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
What might be the problem here?
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
2010-12-05 1:27 [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb Clint Adams
@ 2010-12-05 17:45 ` Albert ARIBAUD
2010-12-06 9:19 ` Prafulla Wadaskar
1 sibling, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2010-12-05 17:45 UTC (permalink / raw)
To: u-boot
Le 05/12/2010 02:27, Clint Adams a ?crit :
> Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my
> GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
>
> What might be the problem here?
There are a couple of fixes to ARM boards which were not in 2010.12-rc2
and may not even be on master actually. Look up Andreas' patches for r8
preservation, notably. These may not solve your problem but they're
needed anyway.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
2010-12-05 1:27 [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb Clint Adams
2010-12-05 17:45 ` Albert ARIBAUD
@ 2010-12-06 9:19 ` Prafulla Wadaskar
1 sibling, 0 replies; 4+ messages in thread
From: Prafulla Wadaskar @ 2010-12-06 9:19 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Clint Adams
> Sent: Sunday, December 05, 2010 6:58 AM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
>
> Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my
> GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
>
> What might be the problem here?
I will cross check this, BTW: I have checked with Sheevaplug and boots properly.
Regards..
Prafulla . .
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
@ 2010-12-06 11:04 Prafulla Wadaskar
0 siblings, 0 replies; 4+ messages in thread
From: Prafulla Wadaskar @ 2010-12-06 11:04 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: Prafulla Wadaskar
> Sent: Monday, December 06, 2010 2:49 PM
> To: 'Clint Adams'; u-boot at lists.denx.de
> Subject: RE: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
>
>
>
> > -----Original Message-----
> > From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> > On Behalf Of Clint Adams
> > Sent: Sunday, December 05, 2010 6:58 AM
> > To: u-boot at lists.denx.de
> > Subject: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
> >
> > Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my
> > GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
> >
> > What might be the problem here?
>
> I will cross check this, BTW: I have checked with Sheevaplug and boots
I have checked on guruplug-plus, flashing u-boot.kwb from latest u-boot.git worked for me.
Regards..
Prafulla . .
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-12-06 11:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-05 1:27 [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb Clint Adams
2010-12-05 17:45 ` Albert ARIBAUD
2010-12-06 9:19 ` Prafulla Wadaskar
-- strict thread matches above, loose matches on Subject: below --
2010-12-06 11:04 Prafulla Wadaskar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox