* [U-Boot] Help required for scanf function in Uboot
@ 2010-12-10 4:32 saurabh narang
2010-12-10 7:34 ` Albert ARIBAUD
0 siblings, 1 reply; 2+ messages in thread
From: saurabh narang @ 2010-12-10 4:32 UTC (permalink / raw)
To: u-boot
Hi
I am not able to implement scanf function in standalone application in Uboot
OR implement scanf in POST
Please help in this regard
Saurabh Kumar narang
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Help required for scanf function in Uboot
2010-12-10 4:32 [U-Boot] Help required for scanf function in Uboot saurabh narang
@ 2010-12-10 7:34 ` Albert ARIBAUD
0 siblings, 0 replies; 2+ messages in thread
From: Albert ARIBAUD @ 2010-12-10 7:34 UTC (permalink / raw)
To: u-boot
Le 10/12/2010 05:32, saurabh narang a ?crit :
> Hi
>
> I am not able to implement scanf function in standalone application in Uboot
> OR implement scanf in POST
>
> Please help in this regard
>
> Saurabh Kumar narang
Hum... Implementing a function you need should be your own lookout.
However, if you have issues with an existing function (e.g. it does not
behave as you think it should), then please indicate:
- which board you are trying this on,
- which commit or label or branch you are building,
- what your issue is in detail (build error message or console trace or
description of the intended and actuall behavior).
If any additional patches or source code is needed, please provide them
too, at least extracts sufficient to reproduce your issue.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-12-10 7:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-10 4:32 [U-Boot] Help required for scanf function in Uboot saurabh narang
2010-12-10 7:34 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox