[U-Boot] [PATCH 1/1] armv7: start.S: code cleanup

[Albert ARIBAUD <albert.aribaud@free.fr>]

Hi Jason,

Le 20/12/2010 07:14, Jason Liu a ?crit :
> Remove the useless code from start.S
>
> Signed-off-by: Jason Liu<r64343@freescale.com>
> ---
>   arch/arm/cpu/armv7/start.S |    2 --
>   1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 684f2d2..cb4f92f 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -171,7 +171,6 @@ stack_setup:
>   	beq	clear_bss		/* skip relocation */
>   #endif
>   	mov	r1, r6			/* r1<- scratch for copy_loop */
> -	ldr	r2, _TEXT_BASE
>   	ldr	r3, _bss_start_ofs
>   	add	r2, r0, r3		/* r2<- source end address	    */
>
> @@ -224,7 +223,6 @@ fixnext:
>   clear_bss:
>   	ldr	r0, _bss_start_ofs
>   	ldr	r1, _bss_end_ofs
> -	ldr	r3, _TEXT_BASE		/* Text base */
>   	mov	r4, r6			/* reloc addr */
>   	add	r0, r0, r4
>   	add	r1, r1, r4

These changes are not a bug fix; they will be deferred until after the 
upcoming release -- and then, I would welcome a single patchset with 
changes to all ARM cpus where this should be done. Can you do this? 
Thanks in advance.

Amicalement,
-- 
Albert.