From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.aribaud@free.fr>
Date: Mon, 20 Dec 2010 07:57:21 +0100
Subject: [U-Boot] [PATCH 1/1] armv7: start.S: code cleanup
In-Reply-To: <1292825699-26688-1-git-send-email-r64343@freescale.com>
References: <1292825699-26688-1-git-send-email-r64343@freescale.com>
Message-ID: <4D0EFE51.1050308@free.fr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jason,

Le 20/12/2010 07:14, Jason Liu a ?crit :
> Remove the useless code from start.S
>
> Signed-off-by: Jason Liu<r64343@freescale.com>
> ---
>   arch/arm/cpu/armv7/start.S |    2 --
>   1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 684f2d2..cb4f92f 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -171,7 +171,6 @@ stack_setup:
>   	beq	clear_bss		/* skip relocation */
>   #endif
>   	mov	r1, r6			/* r1<- scratch for copy_loop */
> -	ldr	r2, _TEXT_BASE
>   	ldr	r3, _bss_start_ofs
>   	add	r2, r0, r3		/* r2<- source end address	    */
>
> @@ -224,7 +223,6 @@ fixnext:
>   clear_bss:
>   	ldr	r0, _bss_start_ofs
>   	ldr	r1, _bss_end_ofs
> -	ldr	r3, _TEXT_BASE		/* Text base */
>   	mov	r4, r6			/* reloc addr */
>   	add	r0, r0, r4
>   	add	r1, r1, r4

These changes are not a bug fix; they will be deferred until after the 
upcoming release -- and then, I would welcome a single patchset with 
changes to all ARM cpus where this should be done. Can you do this? 
Thanks in advance.

Amicalement,
-- 
Albert.