From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.aribaud@free.fr>
Date: Wed, 22 Dec 2010 19:07:12 +0100
Subject: [U-Boot] [PATCH v2 2/3] mxc_i2c: add support for MX53 processor
In-Reply-To: <1293024212-4858-2-git-send-email-r64343@freescale.com>
References: <1293024212-4858-1-git-send-email-r64343@freescale.com>
	<1293024212-4858-2-git-send-email-r64343@freescale.com>
Message-ID: <4D123E50.7030001@free.fr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Le 22/12/2010 14:23, Jason Liu a ?crit :
> This patch add I2C support for Freescale MX53 processor
>
> Signed-off-by: Jason Liu<r64343@freescale.com>
>
> ---
> Changes for v2:
> -address the comments of Heiko, add #if defined(CONFIG_MX31)
>   to avoid break MX31 build. Move CONFIG_HARD_I2C to the top
>   of the file and fix the error message from:
> 	 #error "define CONFIG_SYS_I2C_PORT to use the I2C driver"
>   to      #error "define CONFIG_SYS_I2C_MXxx_PORTx to use the I2C driver"
> ---
>   drivers/i2c/mxc_i2c.c |   19 +++++++++++++++++--
>   1 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
> old mode 100644
> new mode 100755
> index 8e10fbb..95d27ae
> --- a/drivers/i2c/mxc_i2c.c
> +++ b/drivers/i2c/mxc_i2c.c
> @@ -26,8 +26,14 @@
>
>   #if defined(CONFIG_HARD_I2C)
>
> +#ifdef CONFIG_MX31

Can you make this an #if defined() like all others you are adding here?

>   #include<asm/arch/mx31.h>
>   #include<asm/arch/mx31-regs.h>
> +#endif
> +
> +#if defined(CONFIG_MX53)
> +#include<asm/arch/clock.h>
> +#endif
>
>   #define IADR	0x00
>   #define IFDR	0x04
> @@ -56,8 +62,12 @@
>   #elif defined (CONFIG_SYS_I2C_MX31_PORT3)
>   #define I2C_BASE	0x43f84000
>   #define I2C_CLK_OFFSET	30
> +#elif defined(CONFIG_SYS_I2C_MX53_PORT1)
> +#define I2C_BASE        I2C1_BASE_ADDR
> +#elif defined(CONFIG_SYS_I2C_MX53_PORT2)
> +#define I2C_BASE        I2C2_BASE_ADDR
>   #else
> -#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
> +#error "define CONFIG_SYS_I2C_MXxx_PORTx to use the I2C driver"
>   #endif
>
>   #ifdef DEBUG
> @@ -72,11 +82,16 @@ static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
>
>   void i2c_init(int speed, int unused)
>   {
> -	int freq = mx31_get_ipg_clk();
> +	int freq;
>   	int i;
>
> +#ifdef CONFIG_MX31

Ditto, for the sake of homogeneity.

> +	freq = mx31_get_ipg_clk();
>   	/* start the required I2C clock */
>   	__REG(CCM_CGR0) = __REG(CCM_CGR0) | (3<<  I2C_CLK_OFFSET);
> +#else
> +	freq = mxc_get_clock(MXC_IPG_PERCLK);
> +#endif
>
>   	for (i = 0; i<  0x1f; i++)
>   		if (freq / div[i]<= speed)


Amicalement,
-- 
Albert.