From: Sergei Shtylyov <sshtylyov@mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/7] powerpc/86xx: Enable common SRIO init code
Date: Sun, 09 Jan 2011 15:53:36 +0300 [thread overview]
Message-ID: <4D29AFD0.3020103@mvista.com> (raw)
In-Reply-To: <1294333132-28592-5-git-send-email-galak@kernel.crashing.org>
Hello.
On 06-01-2011 19:58, Kumar Gala wrote:
> Add the needed defines and code to utilize the common 8xxx srio init
> code to setup LAWs and modify device tree if we have SRIO enabled on a
> board.
> Signed-off-by: Kumar Gala<galak@kernel.crashing.org>
> ---
> arch/powerpc/cpu/mpc86xx/fdt.c | 9 ++++++++-
> arch/powerpc/include/asm/immap_86xx.h | 4 +++-
> 2 files changed, 11 insertions(+), 2 deletions(-)
> diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
> index ff89ee5..3b96bf5 100644
> --- a/arch/powerpc/cpu/mpc86xx/fdt.c
> +++ b/arch/powerpc/cpu/mpc86xx/fdt.c
[...]
> @@ -14,6 +14,9 @@
> DECLARE_GLOBAL_DATA_PTR;
>
> extern void ft_fixup_num_cores(void *blob);
> +#ifdef CONFIG_SYS_HAS_SRIO
> +extern void ft_srio_setup(void *blob);
> +#endif
There's no need to enclose the *extern* declaration within #ifdef.
WBR, Sergei
next prev parent reply other threads:[~2011-01-09 12:53 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 16:58 [U-Boot] [PATCH 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 5/7] powerpc/86xx: Enable " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-06 16:58 ` [U-Boot] [PATCH 7/7] powerpc/86xx: Convert SBC8641 " Kumar Gala
2011-01-06 19:34 ` Paul Gortmaker
2011-01-11 6:54 ` Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 6/7] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-09 12:53 ` Sergei Shtylyov [this message]
2011-01-09 21:16 ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-09 21:16 ` [U-Boot] [PATCH v2 5/7] powerpc/86xx: Enable common SRIO init code Kumar Gala
2011-01-11 6:54 ` Kumar Gala
2011-01-11 6:53 ` [U-Boot] [PATCH v2 1/7] powerpc/8xxx: Refactor SRIO initialization into common code Kumar Gala
2011-01-11 7:09 ` Wolfgang Denk
2011-01-11 8:11 ` Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 1/8] " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS to use common SRIO init code Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN to use " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 " Kumar Gala
2011-01-11 8:10 ` [U-Boot] [PATCH v3 8/8] powerpc/85xx: Add SRIO support to P2020DS Kumar Gala
2011-01-11 14:14 ` Kumar Gala
2011-01-11 14:14 ` [U-Boot] [PATCH v3 7/8] powerpc/86xx: Convert SBC8641 to use common SRIO init code Kumar Gala
2011-01-11 14:14 ` [U-Boot] [PATCH v3 6/8] powerpc/86xx: Convert MPC8641HPCN " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 5/8] powerpc/86xx: Enable " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 4/8] powerpc/85xx: Convert MPC8569MDS to use " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 3/8] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 14:13 ` [U-Boot] [PATCH v3 2/8] powerpc/85xx: Convert MPC8548CDS " Kumar Gala
2011-01-11 9:46 ` [U-Boot] [PATCH v3 1/8] powerpc/8xxx: Refactor SRIO initialization into common code Wolfgang Denk
2011-01-11 14:13 ` Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 4/7] powerpc/85xx: Convert MPC8569MDS to use common SRIO init code Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 3/7] powerpc/85xx: Convert MPC8568MDS " Kumar Gala
2011-01-11 6:54 ` [U-Boot] [PATCH 2/7] powerpc/85xx: Convert MPC8548CDS " Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D29AFD0.3020103@mvista.com \
--to=sshtylyov@mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox