[U-Boot] [U-BOOT] [PATCH] arm: fix flush cache function on arm926ejs

[Albert ARIBAUD <albert.aribaud@free.fr>]

Hi,

Le 11/01/2011 16:40, Lei Wen a ?crit :
> flush_cache function should only be called when the dcache is on.
> And original flush method for arm926ejs seems don't work, replace
> it with new version.
>
> Test on Marvell Pantheon pxa920 board with usb ether function.
>
> Signed-off-by: Lei Wen<leiwen@marvell.com>
> ---
>   arch/arm/lib/cache.c |    8 ++++----
>   1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
> index 30686fe..b8d5eee 100644
> --- a/arch/arm/lib/cache.c
> +++ b/arch/arm/lib/cache.c
> @@ -27,16 +27,16 @@
>
>   void  flush_cache (unsigned long dummy1, unsigned long dummy2)
>   {
> +	if (!dcache_status())
> +		return;
>   #if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
>   	void arm1136_cache_flush(void);
>
>   	arm1136_cache_flush();
>   #endif
>   #ifdef CONFIG_ARM926EJS
> -	/* test and clean, page 2-23 of arm926ejs manual */
> -	asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
> -	/* disable write buffer as well (page 2-22) */
> -	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
> +	/* clean&  invalidate all D cache */
> +	asm("mcr p15, 0, %0, c7, c14, 0" : : "r" (0));

ARM's ARM926EJ-S r0p4/r0p5 TRM does not define "... c7, c14, 0". Where 
did you find this exact cp15 instruction?

>   #endif
>   #ifdef CONFIG_OMAP34XX
>   	void v7_flush_cache_all(void);

Amicalement,
-- 
Albert.