From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-Boot on IMX.51 EVK
Date: Wed, 12 Jan 2011 08:20:43 +0100 [thread overview]
Message-ID: <4D2D564B.70004@denx.de> (raw)
In-Reply-To: <AANLkTimXih1Obd71iH4ooRV6g_wqnO=SqNZ7FTD+azHm@mail.gmail.com>
On 01/12/2011 02:34 AM, Thomas Besemer wrote:
> Hi Stefano -
>
Hi Thomas,
> Looks like the problem I was having is the Freescale SDK (LTIB) had a
> .config file that ended up with the wrong load address; was picking up
> the MX53 (0x70008000 versus 0x90008000) load/build addys.
Well, then it is clear why the board does not boot...
> Don't know
> why it ever worked....
I can only say I have tested with Freescale's kernel, too, and it
worked. Probably I tried with a version before the introduction of MX53,
and the address was correct.
> I was also able to boot over network without issues.
>
> I don't install uImage on a partition, rather, hand install it on SD
> card with DD, and then load with this:
>
> bootcmd_mmc=run bootargs_base bootargs_mmc; mmc read 0 ${loadaddr}
> 0x800 0x1800;bootm
>
> Just pulls from an offset in SD card. Works fine.
Fine, thanks to report to the ML your results.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
prev parent reply other threads:[~2011-01-12 7:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-11 2:02 [U-Boot] U-Boot on IMX.51 EVK Thomas Besemer
2011-01-11 10:52 ` Stefano Babic
2011-01-12 1:34 ` Thomas Besemer
2011-01-12 5:29 ` Jason Liu
2011-01-12 7:20 ` Stefano Babic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D2D564B.70004@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox