From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 18 Jan 2011 07:17:02 +0100 Subject: [U-Boot] [PATCH v4 5/8] mxc_i2c: add support for MX53 processor In-Reply-To: <20110117225552.84C8DD1CAD5@gemini.denx.de> References: <1294129662-680-1-git-send-email-r64343@freescale.com> <1294129662-680-5-git-send-email-r64343@freescale.com> <4D2D78B1.9090305@denx.de> <20110117225552.84C8DD1CAD5@gemini.denx.de> Message-ID: <4D35305E.60001@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Wolfgang, Wolfgang Denk schrieb: > In message <4D2D78B1.9090305@denx.de> you wrote: >> On 01/04/2011 09:27 AM, Jason Liu wrote: >>> This patch add I2C support for Freescale MX53 processor >>> >>> Signed-off-by: Jason Liu >>> >>> --- >>> Changes for v2: >>> -address the comments of Heiko, add #if defined(CONFIG_MX31) >>> to avoid break MX31 build. Move CONFIG_HARD_I2C to the top >>> of the file and fix the error message from: >>> #error "define CONFIG_SYS_I2C_PORT to use the I2C driver" >>> to #error "define CONFIG_SYS_I2C_MXxx_PORTx to use the I2C driver" >>> >>> Changes for v3: >>> -address the comments from Albert, change #ifdef to #if defined() >>> for the sake of homogeneity >>> --- >>> drivers/i2c/mxc_i2c.c | 21 ++++++++++++++++++--- >>> 1 files changed, 18 insertions(+), 3 deletions(-) >> Applied to u-boot-imx, thanks. > > Please wait for the ACK from the I2C custodian first. Uh, I thought I acked it, but couldn;t find such an EMail, so: Acked-by: Heiko Schocher bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany