[U-Boot] [PATCH 2/2] armv7: add support for s5pc210 universal board

[U-Boot] [PATCH 2/2] armv7: add support for s5pc210 universal board

[Minkyu Kang]

This patch adds support for Samsung s5pc210 universal board

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 MAINTAINERS                                  |    5 +-
 MAKEALL                                      |    1 +
 board/samsung/universal_c210/Makefile        |   51 ++++
 board/samsung/universal_c210/config.mk       |   24 ++
 board/samsung/universal_c210/lowlevel_init.S |  395 ++++++++++++++++++++++++++
 board/samsung/universal_c210/onenand.c       |   34 +++
 board/samsung/universal_c210/universal.c     |  251 ++++++++++++++++
 boards.cfg                                   |    1 +
 include/configs/s5pc210_universal.h          |  248 ++++++++++++++++
 9 files changed, 1008 insertions(+), 2 deletions(-)
 create mode 100644 board/samsung/universal_c210/Makefile
 create mode 100644 board/samsung/universal_c210/config.mk
 create mode 100644 board/samsung/universal_c210/lowlevel_init.S
 create mode 100644 board/samsung/universal_c210/onenand.c
 create mode 100644 board/samsung/universal_c210/universal.c
 create mode 100644 include/configs/s5pc210_universal.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a5f0493..6eed120 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -672,8 +672,9 @@ Nishant Kamat <nskamat@ti.com>
 
 Minkyu Kang <mk7.kang@samsung.com>
 
-	s5p_goni	ARM ARMV7 (S5PC110 SoC)
-	SMDKC100	ARM ARMV7 (S5PC100 SoC)
+	s5p_goni		ARM ARMV7 (S5PC110 SoC)
+	SMDKC100		ARM ARMV7 (S5PC100 SoC)
+	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
 
 Frederik Kriewitz <frederik@kriewitz.eu>
 
diff --git a/MAKEALL b/MAKEALL
index a732e6a..a5b265f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -434,6 +434,7 @@ LIST_ARMV7="		\
 	omap4_panda		\
 	omap4_sdp4430		\
 	s5p_goni		\
+	s5pc210_universal	\
 	smdkc100		\
 "
 
diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile
new file mode 100644
index 0000000..0200220
--- /dev/null
+++ b/board/samsung/universal_c210/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= universal.o onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/universal_c210/config.mk b/board/samsung/universal_c210/config.mk
new file mode 100644
index 0000000..0ecd716
--- /dev/null
+++ b/board/samsung/universal_c210/config.mk
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_SYS_TEXT_BASE = 0x44800000
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
new file mode 100644
index 0000000..67635bb
--- /dev/null
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -0,0 +1,395 @@
+/*
+ * Lowlevel setup for universal board based on S5PC210
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r11, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r7, =S5PC210_GPIO_PART1_BASE
+	ldr	r6, =S5PC210_GPIO_PART2_BASE
+
+	/* System Timer */
+	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r1, =0x5000
+	str	r1, [r0, #0x0]
+	ldr	r1, =0xffffffff
+	str	r1, [r0, #0x8]
+	ldr	r1, =0x49
+	str	r1, [r0, #0x4]
+
+	/* PMIC manual reset */
+	/* nPOWER: XEINT_23: GPX2[7] */
+	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)		@ Output
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	str	r5, [r0]
+
+	/* UART */
+	bl	uart_asm_init
+
+	/* PMU init */
+	bl	system_power_init
+
+	bl	tzpc_init
+
+	mov	lr, r11
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	/*
+	 * setup UART0-UART4 GPIOs (part1)
+	 * GPA1CON[3] = I2C_3_SCL (3)
+	 * GPA1CON[2] = I2C_3_SDA (3)
+	 */
+	mov	r0, r7
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	ldr	r1, =0x00223322
+	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+
+	/* UART_SEL GPY4[7] (part2) at S5PC210 */
+	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x8]
+	bic	r1, r1, #(0x3 << 14)		@ 14 = 7 * 2-bit
+	orr	r1, r1, #(0x3 << 14)		@ Pull-up enabled
+	str	r1, [r0, #0x8]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_clock_init:
+	ldr	r0, =S5PC210_CLOCK_BASE
+
+	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
+	ldr	r1, =0x0101
+	ldr	r2, =0x14200			@ CLK_SRC_CPU
+	str	r1, [r0, r2]
+
+	/* wait ?us */
+	mov	r1, #0x10000
+1:	subs	r1, r1, #1
+	bne	1b
+
+	/*
+	 * CLK_SRC_TOP0
+	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
+	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
+	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
+	 */
+	ldr	r1, =0x10000110
+	ldr	r2, =0x0C210			@ CLK_SRC_TOP
+	str	r1, [r0, r2]
+
+	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+	ldr	r1, =0x0066666
+	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
+	str	r1, [r0, r2]
+	/* UART[0:5], PWM: SCLKMPLL(6) */
+	ldr	r1, =0x6666666
+	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
+	str	r1, [r0, r2]
+
+	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
+	ldr	r1, =0x0133730
+	ldr	r2, =0x14500			@ CLK_DIV_CPU0
+	str	r1, [r0, r2]
+	/* CPU1: COPY, HPM */
+	ldr	r1, =0x03
+	ldr	r2, =0x14504			@ CLK_DIV_CPU1
+	str	r1, [r0, r2]
+	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
+	ldr	r1, =0x13111113
+	ldr	r2, =0x10500			@ CLK_DIV_DMC0
+	str	r1, [r0, r2]
+	/* DMC1: PWI, DVSEM, DPM */
+	ldr	r1, =0x01010100
+	ldr	r2, =0x10504			@ CLK_DIV_DMC1
+	str	r1, [r0, r2]
+	/* LEFTBUS: GDL, GPL */
+	ldr	r1, =0x13
+	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
+	str	r1, [r0, r2]
+	/* RIGHHTBUS: GDR, GPR */
+	ldr	r1, =0x13
+	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
+	str	r1, [r0, r2]
+	/*
+	 * CLK_DIV_TOP
+	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
+	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
+	 */
+	ldr	r1, =0x00005473
+	ldr	r2, =0x0C510			@ CLK_DIV_TOP
+	str	r1, [r0, r2]
+	/* MMC[0:1] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
+	str	r1, [r0, r2]
+	/* MMC[2:3] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
+	str	r1, [r0, r2]
+	/* MMC4 */
+	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
+	str	r1, [r0, r2]
+	/* UART[0:5] */
+	ldr	r1, =0x774777
+	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
+	str	r1, [r0, r2]
+	/* SLIMBUS: ???, PWM */
+	ldr	r1, =0x8
+	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
+	str	r1, [r0, r2]
+
+	/* PLL Setting */
+	ldr	r1, =0x1C20
+	ldr	r2, =0x14000			@ APLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x14008			@ MPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C010			@ EPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C020			@ VPLL_LOCK
+	str	r1, [r0, r2]
+
+	/* APLL */
+	ldr	r1, =0x8000001c
+	ldr	r2, =0x14104			@ APLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14100			@ APLL_CON0
+	str	r1, [r0, r2]
+	/* MPLL */
+	ldr	r1, =0x8000001C
+	ldr	r2, =0x1410C			@ MPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14108			@ MPLL_CON0
+	str	r1, [r0, r2]
+	/* EPLL */
+	ldr	r1, =0x0
+	ldr	r2, =0x0C114			@ EPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80300302			@ 96MHz
+	ldr	r2, =0x0C110			@ EPLL_CON0
+	str	r1, [r0, r2]
+	/* VPLL */
+	ldr	r1, =0x11000400
+	ldr	r2, =0x0C124			@ VPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80350302			@ 108MHz
+	ldr	r2, =0x0C120			@ VPLL_CON0
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
+	 * Turn off all
+	 */
+	ldr	r1, =0xFFF80000
+	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFE0
+	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFC00
+	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
+	str	r1, [r0, r2]
+
+	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
+	ldr	r1, =0xFFFFFFF1
+	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
+	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
+	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
+	 */
+	ldr	r1, =0xFFFAB8A3
+	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
+	str	r1, [r0, r2]
+
+	/*
+	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
+	 * I2C2[8]					: 1111 1110
+	 */
+	ldr	r1, =0xF1FFFEFF
+	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
+	str	r1, [r0, r2]
+
+	/*
+	 * KEYIF[16]					: 1111 1110
+	 */
+	ldr	r1, =0xFFFEFFFF
+	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
+	str	r1, [r0, r2]
+
+	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
+	ldr	r1, =0xFFFFFFD1
+	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
+	str	r1, [r0, r2]
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_power_init:
+	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+
+	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
+	ldr	r1, [r0, r2]
+	orr	r1, r1, #(0x3 << 8)		@ Data High, Output En
+	str	r1, [r0, r2]
+
+	/* Power Down */
+	add	r2, r0, #0x3000
+	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
+	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
+	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
+	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
+	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+tzpc_init:
+	ldr	r0, =0x10110000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10120000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10130000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10140000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10150000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	mov	pc, lr
diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c
new file mode 100644
index 0000000..20e1dc5
--- /dev/null
+++ b/board/samsung/universal_c210/onenand.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
new file mode 100644
index 0000000..a0325c3
--- /dev/null
+++ b/board/samsung/universal_c210/universal.c
@@ -0,0 +1,251 @@
+/*
+ *  Copyright (C) 2010 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/adc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+unsigned int board_rev;
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static int get_hwrev(void)
+{
+	return board_rev & 0xFF;
+}
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%x\n", board_rev);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+	gd->ram_size = gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size;
+}
+
+static unsigned short get_adc_value(int channel)
+{
+	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
+	unsigned short ret = 0;
+	unsigned int reg;
+	unsigned int loop = 0;
+
+	writel(channel & 0xF, &adc->adcmux);
+	writel((1 << 14) | (49 << 6), &adc->adccon);
+	writel(1000 & 0xffff, &adc->adcdly);
+	writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
+	udelay(10);
+	writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
+	udelay(10);
+
+	do {
+		udelay(1);
+		reg = readl(&adc->adccon);
+	} while (!(reg & (1 << 15)) && (loop++ < 1000));
+
+	ret = readl(&adc->adcdat0) & 0xFFF;
+
+	return ret;
+}
+
+static unsigned int get_hw_revision(void)
+{
+	int hwrev, mode0, mode1;
+
+	mode0 = get_adc_value(1);		/* HWREV_MODE0 */
+	mode1 = get_adc_value(2);		/* HWREV_MODE1 */
+
+	/*
+	 * XXX Always set the default hwrev as the latest board
+	 * ADC = (voltage) / 3.3 * 4096
+	 */
+	hwrev = 3;
+
+#define IS_RANGE(x, min, max)	((x) > (min) && (x) < (max))
+	if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x0;		/* 0.01V	0.01V */
+	if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x1;		/* 610mV	0.01V */
+	if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x2;		/* 1.16V	0.01V */
+	if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x3;		/* 1.79V	0.01V */
+#undef IS_RANGE
+
+	debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+	printf("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+
+	return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+	int hwrev;
+
+	hwrev = get_hw_revision();
+
+	board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tUniversal C210\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	switch (get_hwrev()) {
+	case 0:
+		/*
+		 * Set the low to enable LDO_EN
+		 * But when you use the test board for eMMC booting
+		 * you should set it HIGH since it removes the inverter
+		 */
+		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
+		gpio_direction_output(&gpio1->e3, 6, 0);
+		break;
+	default:
+		/*
+		 * Default reset state is High and there's no inverter
+		 * But set it as HIGH to ensure
+		 */
+		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
+		gpio_direction_output(&gpio1->e1, 3, 1);
+		break;
+	}
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]	SD_0_CLK(2)
+	 * GPK0[1]	SD_0_CMD(2)
+	 * GPK0[2]	SD_0_CDn	-> Not used
+	 * GPK0[3:6]	SD_0_DATA[0:3](2)
+	 * GPK1[3:6]	SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]	SD_4_CLK(3)
+	 * GPK0[1]	SD_4_CMD(3)
+	 * GPK0[2]	SD_4_CDn	-> Not used
+	 * GPK0[3:6]	SD_4_DATA[0:3](3)
+	 * GPK1[3:6]	SD_4_DATA[4:7](4)
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPK0[0:6] special function 2 */
+		gpio_cfg_pin(&gpio2->k0, i, 0x2);
+		/* GPK0[0:6] pull disable */
+		gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+		/* GPK0[0:6] drv 4x */
+		gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i < 7; i++) {
+		/* GPK1[3:6] special function 3 */
+		gpio_cfg_pin(&gpio2->k1, i, 0x3);
+		/* GPK1[3:6] pull disable */
+		gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+		/* GPK1[3:6] drv 4x */
+		gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+	}
+
+	/* T-flash detect */
+	gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+	gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+
+	/*
+	 * MMC device init
+	 * mmc0	 : eMMC (8-bit buswidth)
+	 * mmc2	 : SD card (4-bit buswidth)
+	 */
+	err = s5p_mmc_init(0, 8);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[4] T-flash detect pin
+	 */
+	if (!gpio_get_value(&gpio2->x3, 4)) {
+		/*
+		 * SD card GPIO:
+		 * GPK2[0]	SD_2_CLK(2)
+		 * GPK2[1]	SD_2_CMD(2)
+		 * GPK2[2]	SD_2_CDn	-> Not used
+		 * GPK2[3:6]	SD_2_DATA[0:3](2)
+		 */
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+			/* GPK2[0:6] special function 2 */
+			gpio_cfg_pin(&gpio2->k2, i, 0x2);
+			/* GPK2[0:6] pull disable */
+			gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			/* GPK2[0:6] drv 4x */
+			gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		}
+		err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index da115f7..f8c0dcd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -123,6 +123,7 @@ omap4_panda                  arm         armv7       panda               ti
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
 actux1                       arm         ixp
 actux2                       arm         ixp
 actux3                       arm         ixp
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
new file mode 100644
index 0000000..eca6915
--- /dev/null
+++ b/include/configs/s5pc210_universal.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5P		1	/* which is in a S5P Family */
+#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
+#define CONFIG_UNIVERSAL	1	/* working with Universal */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+#define CONFIG_SYS_SDRAM_BASE	0x40000000
+
+/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+#define CONFIG_SYS_CLK_FREQ_C210	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_SERIAL2          1	/* use SERIAL 2 */
+#define CONFIG_BAUDRATE		115200
+
+/* MMC */
+#define CONFIG_GENERIC_MMC	1
+#define CONFIG_MMC		1
+#define CONFIG_S5P_MMC		1
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
+				"128k(s-boot)"\
+				",896k(bootloader)"\
+				",256k(params)"\
+				",2816k(config)"\
+				",8m(csa)"\
+				",7m(kernel)"\
+				",1m(log)"\
+				",12m(modem)"\
+				",60m(qboot)"\
+				",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+				"${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_AUTOSAVE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"updateb=" \
+		"onenand erase 0x0 0x100000;" \
+		"onenand write 0x42008000 0x0 0x100000\0" \
+	"updatek=" \
+		"onenand erase 0xc00000 0x500000;" \
+		"onenand write 0x41008000 0xc00000 0x500000\0" \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+	"tftpboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT \
+		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mtdparts=" MTDPARTS_DEFAULT \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M at 0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"ubi=enabled\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=3\0" \
+	"opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT	"Universal # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE	(256 << 10)	/* regular stack 256KB */
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+
+#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* 1MB for ram console */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SYS_ONENAND_BASE		0x0C000000
+
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION	1
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#endif	/* __CONFIG_H */
-- 
1.7.1

[U-Boot] [PATCH 2/2] armv7: add support for s5pc210 universal board

[Minkyu Kang]

On 10 January 2011 20:59, Minkyu Kang <mk7.kang@samsung.com> wrote:
> This patch adds support for Samsung s5pc210 universal board
>
> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?5 +-
> ?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> ?board/samsung/universal_c210/Makefile ? ? ? ?| ? 51 ++++
> ?board/samsung/universal_c210/config.mk ? ? ? | ? 24 ++
> ?board/samsung/universal_c210/lowlevel_init.S | ?395 ++++++++++++++++++++++++++
> ?board/samsung/universal_c210/onenand.c ? ? ? | ? 34 +++
> ?board/samsung/universal_c210/universal.c ? ? | ?251 ++++++++++++++++
> ?boards.cfg ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?include/configs/s5pc210_universal.h ? ? ? ? ?| ?248 ++++++++++++++++
> ?9 files changed, 1008 insertions(+), 2 deletions(-)
> ?create mode 100644 board/samsung/universal_c210/Makefile
> ?create mode 100644 board/samsung/universal_c210/config.mk
> ?create mode 100644 board/samsung/universal_c210/lowlevel_init.S
> ?create mode 100644 board/samsung/universal_c210/onenand.c
> ?create mode 100644 board/samsung/universal_c210/universal.c
> ?create mode 100644 include/configs/s5pc210_universal.h
>

> diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
> new file mode 100644
> index 0000000..a0325c3
> --- /dev/null
> +++ b/board/samsung/universal_c210/universal.c
> @@ -0,0 +1,251 @@
> +/*
> + * ?Copyright (C) 2010 Samsung Electronics
> + * ?Minkyu Kang <mk7.kang@samsung.com>
> + * ?Kyungmin Park <kyungmin.park@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/adc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/mmc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct s5pc210_gpio_part1 *gpio1;
> +struct s5pc210_gpio_part2 *gpio2;
> +unsigned int board_rev;
> +
> +u32 get_board_rev(void)
> +{
> + ? ? ? return board_rev;
> +}
> +
> +static int get_hwrev(void)
> +{
> + ? ? ? return board_rev & 0xFF;
> +}
> +
> +static void check_hw_revision(void);
> +
> +int board_init(void)
> +{
> + ? ? ? gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
> + ? ? ? gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
> +
> + ? ? ? gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
> + ? ? ? gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + ? ? ? check_hw_revision();
> + ? ? ? printf("HW Revision:\t0x%x\n", board_rev);
> +
> + ? ? ? return 0;
> +}
> +
> +int dram_init(void)
> +{
> + ? ? ? gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
> + ? ? ? return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> + ? ? ? gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + ? ? ? gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> + ? ? ? gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> + ? ? ? gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> +
> + ? ? ? gd->ram_size = gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size;
> +}
> +
> +static unsigned short get_adc_value(int channel)
> +{
> + ? ? ? struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
> + ? ? ? unsigned short ret = 0;
> + ? ? ? unsigned int reg;
> + ? ? ? unsigned int loop = 0;
> +
> + ? ? ? writel(channel & 0xF, &adc->adcmux);
> + ? ? ? writel((1 << 14) | (49 << 6), &adc->adccon);
> + ? ? ? writel(1000 & 0xffff, &adc->adcdly);
> + ? ? ? writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
> + ? ? ? udelay(10);
> + ? ? ? writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
> + ? ? ? udelay(10);
> +
> + ? ? ? do {
> + ? ? ? ? ? ? ? udelay(1);
> + ? ? ? ? ? ? ? reg = readl(&adc->adccon);
> + ? ? ? } while (!(reg & (1 << 15)) && (loop++ < 1000));
> +
> + ? ? ? ret = readl(&adc->adcdat0) & 0xFFF;
> +
> + ? ? ? return ret;
> +}
> +
> +static unsigned int get_hw_revision(void)
> +{
> + ? ? ? int hwrev, mode0, mode1;
> +
> + ? ? ? mode0 = get_adc_value(1); ? ? ? ? ? ? ? /* HWREV_MODE0 */
> + ? ? ? mode1 = get_adc_value(2); ? ? ? ? ? ? ? /* HWREV_MODE1 */
> +
> + ? ? ? /*
> + ? ? ? ?* XXX Always set the default hwrev as the latest board
> + ? ? ? ?* ADC = (voltage) / 3.3 * 4096
> + ? ? ? ?*/
> + ? ? ? hwrev = 3;
> +
> +#define IS_RANGE(x, min, max) ?((x) > (min) && (x) < (max))
> + ? ? ? if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
> + ? ? ? ? ? ? ? hwrev = 0x0; ? ? ? ? ? ?/* 0.01V ? ? ? ?0.01V */
> + ? ? ? if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
> + ? ? ? ? ? ? ? hwrev = 0x1; ? ? ? ? ? ?/* 610mV ? ? ? ?0.01V */
> + ? ? ? if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
> + ? ? ? ? ? ? ? hwrev = 0x2; ? ? ? ? ? ?/* 1.16V ? ? ? ?0.01V */
> + ? ? ? if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
> + ? ? ? ? ? ? ? hwrev = 0x3; ? ? ? ? ? ?/* 1.79V ? ? ? ?0.01V */
> +#undef IS_RANGE
> +
> + ? ? ? debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
> + ? ? ? printf("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);

This is duplicated debug message.
I will remove it.

> +
> + ? ? ? return hwrev;
> +}
> +
> +static void check_hw_revision(void)
> +{
> + ? ? ? int hwrev;
> +
> + ? ? ? hwrev = get_hw_revision();
> +
> + ? ? ? board_rev |= hwrev;
> +}
> +
> +#ifdef CONFIG_DISPLAY_BOARDINFO
> +int checkboard(void)
> +{
> + ? ? ? puts("Board:\tUniversal C210\n");
> + ? ? ? return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + ? ? ? int i, err;
> +
> + ? ? ? switch (get_hwrev()) {
> + ? ? ? case 0:
> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* Set the low to enable LDO_EN
> + ? ? ? ? ? ? ? ?* But when you use the test board for eMMC booting
> + ? ? ? ? ? ? ? ?* you should set it HIGH since it removes the inverter
> + ? ? ? ? ? ? ? ?*/
> + ? ? ? ? ? ? ? /* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
> + ? ? ? ? ? ? ? gpio_direction_output(&gpio1->e3, 6, 0);
> + ? ? ? ? ? ? ? break;
> + ? ? ? default:
> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* Default reset state is High and there's no inverter
> + ? ? ? ? ? ? ? ?* But set it as HIGH to ensure
> + ? ? ? ? ? ? ? ?*/
> + ? ? ? ? ? ? ? /* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
> + ? ? ? ? ? ? ? gpio_direction_output(&gpio1->e1, 3, 1);
> + ? ? ? ? ? ? ? break;
> + ? ? ? }
> +
> + ? ? ? /*
> + ? ? ? ?* eMMC GPIO:
> + ? ? ? ?* SDR 8-bit at 48MHz at MMC0
> + ? ? ? ?* GPK0[0] ? ? ?SD_0_CLK(2)
> + ? ? ? ?* GPK0[1] ? ? ?SD_0_CMD(2)
> + ? ? ? ?* GPK0[2] ? ? ?SD_0_CDn ? ? ? ?-> Not used
> + ? ? ? ?* GPK0[3:6] ? ?SD_0_DATA[0:3](2)
> + ? ? ? ?* GPK1[3:6] ? ?SD_0_DATA[0:3](3)
> + ? ? ? ?*
> + ? ? ? ?* DDR 4-bit at 26MHz at MMC4
> + ? ? ? ?* GPK0[0] ? ? ?SD_4_CLK(3)
> + ? ? ? ?* GPK0[1] ? ? ?SD_4_CMD(3)
> + ? ? ? ?* GPK0[2] ? ? ?SD_4_CDn ? ? ? ?-> Not used
> + ? ? ? ?* GPK0[3:6] ? ?SD_4_DATA[0:3](3)
> + ? ? ? ?* GPK1[3:6] ? ?SD_4_DATA[4:7](4)
> + ? ? ? ?*/
> + ? ? ? for (i = 0; i < 7; i++) {
> + ? ? ? ? ? ? ? if (i == 2)
> + ? ? ? ? ? ? ? ? ? ? ? continue;
> + ? ? ? ? ? ? ? /* GPK0[0:6] special function 2 */
> + ? ? ? ? ? ? ? gpio_cfg_pin(&gpio2->k0, i, 0x2);
> + ? ? ? ? ? ? ? /* GPK0[0:6] pull disable */
> + ? ? ? ? ? ? ? gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
> + ? ? ? ? ? ? ? /* GPK0[0:6] drv 4x */
> + ? ? ? ? ? ? ? gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
> + ? ? ? }
> +
> + ? ? ? for (i = 3; i < 7; i++) {
> + ? ? ? ? ? ? ? /* GPK1[3:6] special function 3 */
> + ? ? ? ? ? ? ? gpio_cfg_pin(&gpio2->k1, i, 0x3);
> + ? ? ? ? ? ? ? /* GPK1[3:6] pull disable */
> + ? ? ? ? ? ? ? gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
> + ? ? ? ? ? ? ? /* GPK1[3:6] drv 4x */
> + ? ? ? ? ? ? ? gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
> + ? ? ? }
> +
> + ? ? ? /* T-flash detect */
> + ? ? ? gpio_cfg_pin(&gpio2->x3, 4, 0xf);
> + ? ? ? gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
> +
> + ? ? ? /*
> + ? ? ? ?* MMC device init
> + ? ? ? ?* mmc0 ?: eMMC (8-bit buswidth)
> + ? ? ? ?* mmc2 ?: SD card (4-bit buswidth)
> + ? ? ? ?*/
> + ? ? ? err = s5p_mmc_init(0, 8);
> +
> + ? ? ? /*
> + ? ? ? ?* Check the T-flash ?detect pin
> + ? ? ? ?* GPX3[4] T-flash detect pin
> + ? ? ? ?*/
> + ? ? ? if (!gpio_get_value(&gpio2->x3, 4)) {
> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* SD card GPIO:
> + ? ? ? ? ? ? ? ?* GPK2[0] ? ? ?SD_2_CLK(2)
> + ? ? ? ? ? ? ? ?* GPK2[1] ? ? ?SD_2_CMD(2)
> + ? ? ? ? ? ? ? ?* GPK2[2] ? ? ?SD_2_CDn ? ? ? ?-> Not used
> + ? ? ? ? ? ? ? ?* GPK2[3:6] ? ?SD_2_DATA[0:3](2)
> + ? ? ? ? ? ? ? ?*/
> + ? ? ? ? ? ? ? for (i = 0; i < 7; i++) {
> + ? ? ? ? ? ? ? ? ? ? ? if (i == 2)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? continue;
> + ? ? ? ? ? ? ? ? ? ? ? /* GPK2[0:6] special function 2 */
> + ? ? ? ? ? ? ? ? ? ? ? gpio_cfg_pin(&gpio2->k2, i, 0x2);
> + ? ? ? ? ? ? ? ? ? ? ? /* GPK2[0:6] pull disable */
> + ? ? ? ? ? ? ? ? ? ? ? gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
> + ? ? ? ? ? ? ? ? ? ? ? /* GPK2[0:6] drv 4x */
> + ? ? ? ? ? ? ? ? ? ? ? gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
> + ? ? ? ? ? ? ? }
> + ? ? ? ? ? ? ? err = s5p_mmc_init(2, 4);
> + ? ? ? }
> +
> + ? ? ? return err;
> +
> +}
> +#endif


-- 
from. prom.
www.promsoft.net

[U-Boot] [PATCH v2 2/2] armv7: add support for s5pc210 universal board

[Minkyu Kang]

This patch adds support for Samsung s5pc210 universal board

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
v2
 remove debug message

 MAINTAINERS                                  |    5 +-
 MAKEALL                                      |    1 +
 board/samsung/universal_c210/Makefile        |   51 ++++
 board/samsung/universal_c210/config.mk       |   24 ++
 board/samsung/universal_c210/lowlevel_init.S |  395 ++++++++++++++++++++++++++
 board/samsung/universal_c210/onenand.c       |   34 +++
 board/samsung/universal_c210/universal.c     |  250 ++++++++++++++++
 boards.cfg                                   |    1 +
 include/configs/s5pc210_universal.h          |  248 ++++++++++++++++
 9 files changed, 1007 insertions(+), 2 deletions(-)
 create mode 100644 board/samsung/universal_c210/Makefile
 create mode 100644 board/samsung/universal_c210/config.mk
 create mode 100644 board/samsung/universal_c210/lowlevel_init.S
 create mode 100644 board/samsung/universal_c210/onenand.c
 create mode 100644 board/samsung/universal_c210/universal.c
 create mode 100644 include/configs/s5pc210_universal.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a5f0493..6eed120 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -672,8 +672,9 @@ Nishant Kamat <nskamat@ti.com>
 
 Minkyu Kang <mk7.kang@samsung.com>
 
-	s5p_goni	ARM ARMV7 (S5PC110 SoC)
-	SMDKC100	ARM ARMV7 (S5PC100 SoC)
+	SMDKC100		ARM ARMV7 (S5PC100 SoC)
+	s5p_goni		ARM ARMV7 (S5PC110 SoC)
+	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
 
 Frederik Kriewitz <frederik@kriewitz.eu>
 
diff --git a/MAKEALL b/MAKEALL
index a732e6a..a5b265f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -434,6 +434,7 @@ LIST_ARMV7="		\
 	omap4_panda		\
 	omap4_sdp4430		\
 	s5p_goni		\
+	s5pc210_universal	\
 	smdkc100		\
 "
 
diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile
new file mode 100644
index 0000000..0200220
--- /dev/null
+++ b/board/samsung/universal_c210/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= universal.o onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/universal_c210/config.mk b/board/samsung/universal_c210/config.mk
new file mode 100644
index 0000000..0ecd716
--- /dev/null
+++ b/board/samsung/universal_c210/config.mk
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_SYS_TEXT_BASE = 0x44800000
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
new file mode 100644
index 0000000..67635bb
--- /dev/null
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -0,0 +1,395 @@
+/*
+ * Lowlevel setup for universal board based on S5PC210
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r11, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r7, =S5PC210_GPIO_PART1_BASE
+	ldr	r6, =S5PC210_GPIO_PART2_BASE
+
+	/* System Timer */
+	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r1, =0x5000
+	str	r1, [r0, #0x0]
+	ldr	r1, =0xffffffff
+	str	r1, [r0, #0x8]
+	ldr	r1, =0x49
+	str	r1, [r0, #0x4]
+
+	/* PMIC manual reset */
+	/* nPOWER: XEINT_23: GPX2[7] */
+	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)		@ Output
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	str	r5, [r0]
+
+	/* UART */
+	bl	uart_asm_init
+
+	/* PMU init */
+	bl	system_power_init
+
+	bl	tzpc_init
+
+	mov	lr, r11
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	/*
+	 * setup UART0-UART4 GPIOs (part1)
+	 * GPA1CON[3] = I2C_3_SCL (3)
+	 * GPA1CON[2] = I2C_3_SDA (3)
+	 */
+	mov	r0, r7
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	ldr	r1, =0x00223322
+	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+
+	/* UART_SEL GPY4[7] (part2) at S5PC210 */
+	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x8]
+	bic	r1, r1, #(0x3 << 14)		@ 14 = 7 * 2-bit
+	orr	r1, r1, #(0x3 << 14)		@ Pull-up enabled
+	str	r1, [r0, #0x8]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_clock_init:
+	ldr	r0, =S5PC210_CLOCK_BASE
+
+	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
+	ldr	r1, =0x0101
+	ldr	r2, =0x14200			@ CLK_SRC_CPU
+	str	r1, [r0, r2]
+
+	/* wait ?us */
+	mov	r1, #0x10000
+1:	subs	r1, r1, #1
+	bne	1b
+
+	/*
+	 * CLK_SRC_TOP0
+	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
+	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
+	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
+	 */
+	ldr	r1, =0x10000110
+	ldr	r2, =0x0C210			@ CLK_SRC_TOP
+	str	r1, [r0, r2]
+
+	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+	ldr	r1, =0x0066666
+	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
+	str	r1, [r0, r2]
+	/* UART[0:5], PWM: SCLKMPLL(6) */
+	ldr	r1, =0x6666666
+	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
+	str	r1, [r0, r2]
+
+	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
+	ldr	r1, =0x0133730
+	ldr	r2, =0x14500			@ CLK_DIV_CPU0
+	str	r1, [r0, r2]
+	/* CPU1: COPY, HPM */
+	ldr	r1, =0x03
+	ldr	r2, =0x14504			@ CLK_DIV_CPU1
+	str	r1, [r0, r2]
+	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
+	ldr	r1, =0x13111113
+	ldr	r2, =0x10500			@ CLK_DIV_DMC0
+	str	r1, [r0, r2]
+	/* DMC1: PWI, DVSEM, DPM */
+	ldr	r1, =0x01010100
+	ldr	r2, =0x10504			@ CLK_DIV_DMC1
+	str	r1, [r0, r2]
+	/* LEFTBUS: GDL, GPL */
+	ldr	r1, =0x13
+	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
+	str	r1, [r0, r2]
+	/* RIGHHTBUS: GDR, GPR */
+	ldr	r1, =0x13
+	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
+	str	r1, [r0, r2]
+	/*
+	 * CLK_DIV_TOP
+	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
+	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
+	 */
+	ldr	r1, =0x00005473
+	ldr	r2, =0x0C510			@ CLK_DIV_TOP
+	str	r1, [r0, r2]
+	/* MMC[0:1] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
+	str	r1, [r0, r2]
+	/* MMC[2:3] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
+	str	r1, [r0, r2]
+	/* MMC4 */
+	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
+	str	r1, [r0, r2]
+	/* UART[0:5] */
+	ldr	r1, =0x774777
+	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
+	str	r1, [r0, r2]
+	/* SLIMBUS: ???, PWM */
+	ldr	r1, =0x8
+	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
+	str	r1, [r0, r2]
+
+	/* PLL Setting */
+	ldr	r1, =0x1C20
+	ldr	r2, =0x14000			@ APLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x14008			@ MPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C010			@ EPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C020			@ VPLL_LOCK
+	str	r1, [r0, r2]
+
+	/* APLL */
+	ldr	r1, =0x8000001c
+	ldr	r2, =0x14104			@ APLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14100			@ APLL_CON0
+	str	r1, [r0, r2]
+	/* MPLL */
+	ldr	r1, =0x8000001C
+	ldr	r2, =0x1410C			@ MPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14108			@ MPLL_CON0
+	str	r1, [r0, r2]
+	/* EPLL */
+	ldr	r1, =0x0
+	ldr	r2, =0x0C114			@ EPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80300302			@ 96MHz
+	ldr	r2, =0x0C110			@ EPLL_CON0
+	str	r1, [r0, r2]
+	/* VPLL */
+	ldr	r1, =0x11000400
+	ldr	r2, =0x0C124			@ VPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80350302			@ 108MHz
+	ldr	r2, =0x0C120			@ VPLL_CON0
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
+	 * Turn off all
+	 */
+	ldr	r1, =0xFFF80000
+	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFE0
+	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFC00
+	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
+	str	r1, [r0, r2]
+
+	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
+	ldr	r1, =0xFFFFFFF1
+	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
+	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
+	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
+	 */
+	ldr	r1, =0xFFFAB8A3
+	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
+	str	r1, [r0, r2]
+
+	/*
+	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
+	 * I2C2[8]					: 1111 1110
+	 */
+	ldr	r1, =0xF1FFFEFF
+	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
+	str	r1, [r0, r2]
+
+	/*
+	 * KEYIF[16]					: 1111 1110
+	 */
+	ldr	r1, =0xFFFEFFFF
+	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
+	str	r1, [r0, r2]
+
+	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
+	ldr	r1, =0xFFFFFFD1
+	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
+	str	r1, [r0, r2]
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_power_init:
+	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+
+	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
+	ldr	r1, [r0, r2]
+	orr	r1, r1, #(0x3 << 8)		@ Data High, Output En
+	str	r1, [r0, r2]
+
+	/* Power Down */
+	add	r2, r0, #0x3000
+	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
+	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
+	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
+	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
+	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+tzpc_init:
+	ldr	r0, =0x10110000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10120000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10130000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10140000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10150000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	mov	pc, lr
diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c
new file mode 100644
index 0000000..20e1dc5
--- /dev/null
+++ b/board/samsung/universal_c210/onenand.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
new file mode 100644
index 0000000..639f0d1
--- /dev/null
+++ b/board/samsung/universal_c210/universal.c
@@ -0,0 +1,250 @@
+/*
+ *  Copyright (C) 2010 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/adc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+unsigned int board_rev;
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static int get_hwrev(void)
+{
+	return board_rev & 0xFF;
+}
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%x\n", board_rev);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+	gd->ram_size = gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size;
+}
+
+static unsigned short get_adc_value(int channel)
+{
+	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
+	unsigned short ret = 0;
+	unsigned int reg;
+	unsigned int loop = 0;
+
+	writel(channel & 0xF, &adc->adcmux);
+	writel((1 << 14) | (49 << 6), &adc->adccon);
+	writel(1000 & 0xffff, &adc->adcdly);
+	writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
+	udelay(10);
+	writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
+	udelay(10);
+
+	do {
+		udelay(1);
+		reg = readl(&adc->adccon);
+	} while (!(reg & (1 << 15)) && (loop++ < 1000));
+
+	ret = readl(&adc->adcdat0) & 0xFFF;
+
+	return ret;
+}
+
+static unsigned int get_hw_revision(void)
+{
+	int hwrev, mode0, mode1;
+
+	mode0 = get_adc_value(1);		/* HWREV_MODE0 */
+	mode1 = get_adc_value(2);		/* HWREV_MODE1 */
+
+	/*
+	 * XXX Always set the default hwrev as the latest board
+	 * ADC = (voltage) / 3.3 * 4096
+	 */
+	hwrev = 3;
+
+#define IS_RANGE(x, min, max)	((x) > (min) && (x) < (max))
+	if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x0;		/* 0.01V	0.01V */
+	if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x1;		/* 610mV	0.01V */
+	if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x2;		/* 1.16V	0.01V */
+	if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x3;		/* 1.79V	0.01V */
+#undef IS_RANGE
+
+	debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+
+	return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+	int hwrev;
+
+	hwrev = get_hw_revision();
+
+	board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tUniversal C210\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	switch (get_hwrev()) {
+	case 0:
+		/*
+		 * Set the low to enable LDO_EN
+		 * But when you use the test board for eMMC booting
+		 * you should set it HIGH since it removes the inverter
+		 */
+		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
+		gpio_direction_output(&gpio1->e3, 6, 0);
+		break;
+	default:
+		/*
+		 * Default reset state is High and there's no inverter
+		 * But set it as HIGH to ensure
+		 */
+		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
+		gpio_direction_output(&gpio1->e1, 3, 1);
+		break;
+	}
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]	SD_0_CLK(2)
+	 * GPK0[1]	SD_0_CMD(2)
+	 * GPK0[2]	SD_0_CDn	-> Not used
+	 * GPK0[3:6]	SD_0_DATA[0:3](2)
+	 * GPK1[3:6]	SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]	SD_4_CLK(3)
+	 * GPK0[1]	SD_4_CMD(3)
+	 * GPK0[2]	SD_4_CDn	-> Not used
+	 * GPK0[3:6]	SD_4_DATA[0:3](3)
+	 * GPK1[3:6]	SD_4_DATA[4:7](4)
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPK0[0:6] special function 2 */
+		gpio_cfg_pin(&gpio2->k0, i, 0x2);
+		/* GPK0[0:6] pull disable */
+		gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+		/* GPK0[0:6] drv 4x */
+		gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i < 7; i++) {
+		/* GPK1[3:6] special function 3 */
+		gpio_cfg_pin(&gpio2->k1, i, 0x3);
+		/* GPK1[3:6] pull disable */
+		gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+		/* GPK1[3:6] drv 4x */
+		gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+	}
+
+	/* T-flash detect */
+	gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+	gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+
+	/*
+	 * MMC device init
+	 * mmc0	 : eMMC (8-bit buswidth)
+	 * mmc2	 : SD card (4-bit buswidth)
+	 */
+	err = s5p_mmc_init(0, 8);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[4] T-flash detect pin
+	 */
+	if (!gpio_get_value(&gpio2->x3, 4)) {
+		/*
+		 * SD card GPIO:
+		 * GPK2[0]	SD_2_CLK(2)
+		 * GPK2[1]	SD_2_CMD(2)
+		 * GPK2[2]	SD_2_CDn	-> Not used
+		 * GPK2[3:6]	SD_2_DATA[0:3](2)
+		 */
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+			/* GPK2[0:6] special function 2 */
+			gpio_cfg_pin(&gpio2->k2, i, 0x2);
+			/* GPK2[0:6] pull disable */
+			gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			/* GPK2[0:6] drv 4x */
+			gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		}
+		err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index da115f7..f8c0dcd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -123,6 +123,7 @@ omap4_panda                  arm         armv7       panda               ti
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
 actux1                       arm         ixp
 actux2                       arm         ixp
 actux3                       arm         ixp
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
new file mode 100644
index 0000000..eca6915
--- /dev/null
+++ b/include/configs/s5pc210_universal.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5P		1	/* which is in a S5P Family */
+#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
+#define CONFIG_UNIVERSAL	1	/* working with Universal */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+#define CONFIG_SYS_SDRAM_BASE	0x40000000
+
+/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+#define CONFIG_SYS_CLK_FREQ_C210	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_SERIAL2          1	/* use SERIAL 2 */
+#define CONFIG_BAUDRATE		115200
+
+/* MMC */
+#define CONFIG_GENERIC_MMC	1
+#define CONFIG_MMC		1
+#define CONFIG_S5P_MMC		1
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
+				"128k(s-boot)"\
+				",896k(bootloader)"\
+				",256k(params)"\
+				",2816k(config)"\
+				",8m(csa)"\
+				",7m(kernel)"\
+				",1m(log)"\
+				",12m(modem)"\
+				",60m(qboot)"\
+				",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+				"${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_AUTOSAVE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"updateb=" \
+		"onenand erase 0x0 0x100000;" \
+		"onenand write 0x42008000 0x0 0x100000\0" \
+	"updatek=" \
+		"onenand erase 0xc00000 0x500000;" \
+		"onenand write 0x41008000 0xc00000 0x500000\0" \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+	"tftpboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT \
+		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mtdparts=" MTDPARTS_DEFAULT \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M at 0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"ubi=enabled\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=3\0" \
+	"opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT	"Universal # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE	(256 << 10)	/* regular stack 256KB */
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+
+#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* 1MB for ram console */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SYS_ONENAND_BASE		0x0C000000
+
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION	1
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#endif	/* __CONFIG_H */
-- 
1.7.1

[U-Boot] [PATCH v2 2/2] armv7: add support for s5pc210 universal board

[Wolfgang Denk]

Dear Minkyu Kang,

In message <4D2ED0E1.7090001@samsung.com> you wrote:
> This patch adds support for Samsung s5pc210 universal board
> 
> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
...
> diff --git a/MAKEALL b/MAKEALL
> index a732e6a..a5b265f 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -434,6 +434,7 @@ LIST_ARMV7="		\
>  	omap4_panda		\
>  	omap4_sdp4430		\
>  	s5p_goni		\
> +	s5pc210_universal	\
>  	smdkc100		\

NO - boards don't get added to MAKEALL any more. MAKEALL automatically
picks them up from boards.cfg.  Please remove.

...
> --- /dev/null
> +++ b/board/samsung/universal_c210/config.mk
...
> +CONFIG_SYS_TEXT_BASE = 0x44800000

No. Please remove config.mk and define CONFIG_SYS_TEXT_BASE in your
board config file instead.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If I don't document something, it's usually either for a good reason,
or a bad reason.  In this case it's a good reason.  :-)
                 - Larry Wall in <1992Jan17.005405.16806@netlabs.com>

[U-Boot] [PATCH v2 2/2] armv7: add support for s5pc210 universal board

[Minkyu Kang]

Dear Wolfgang Denk,

On 18 January 2011 08:08, Wolfgang Denk <wd@denx.de> wrote:
> Dear Minkyu Kang,
>
> In message <4D2ED0E1.7090001@samsung.com> you wrote:
>> This patch adds support for Samsung s5pc210 universal board
>>
>> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ...
>> diff --git a/MAKEALL b/MAKEALL
>> index a732e6a..a5b265f 100755
>> --- a/MAKEALL
>> +++ b/MAKEALL
>> @@ -434,6 +434,7 @@ LIST_ARMV7=" ? ? ? ? ? ? ?\
>> ? ? ? omap4_panda ? ? ? ? ? ? \
>> ? ? ? omap4_sdp4430 ? ? ? ? ? \
>> ? ? ? s5p_goni ? ? ? ? ? ? ? ?\
>> + ? ? s5pc210_universal ? ? ? \
>> ? ? ? smdkc100 ? ? ? ? ? ? ? ?\
>
> NO - boards don't get added to MAKEALL any more. MAKEALL automatically
> picks them up from boards.cfg. ?Please remove.
>
> ...
>> --- /dev/null
>> +++ b/board/samsung/universal_c210/config.mk
> ...
>> +CONFIG_SYS_TEXT_BASE = 0x44800000
>
> No. Please remove config.mk and define CONFIG_SYS_TEXT_BASE in your
> board config file instead.
>

OK, will fix.

Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net

[U-Boot] [PATCH v3 2/2] armv7: add support for s5pc210 universal board

[Minkyu Kang]

This patch adds support for Samsung s5pc210 universal board

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
v3
 remove config.mk
 don't add board to MAKEALL
v2
 remove debug message

 MAINTAINERS                                  |    5 +-
 board/samsung/universal_c210/Makefile        |   51 ++++
 board/samsung/universal_c210/lowlevel_init.S |  395 ++++++++++++++++++++++++++
 board/samsung/universal_c210/onenand.c       |   34 +++
 board/samsung/universal_c210/universal.c     |  250 ++++++++++++++++
 boards.cfg                                   |    1 +
 include/configs/s5pc210_universal.h          |  244 ++++++++++++++++
 7 files changed, 978 insertions(+), 2 deletions(-)
 create mode 100644 board/samsung/universal_c210/Makefile
 create mode 100644 board/samsung/universal_c210/lowlevel_init.S
 create mode 100644 board/samsung/universal_c210/onenand.c
 create mode 100644 board/samsung/universal_c210/universal.c
 create mode 100644 include/configs/s5pc210_universal.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a5f0493..55977d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -672,8 +672,9 @@ Nishant Kamat <nskamat@ti.com>
 
 Minkyu Kang <mk7.kang@samsung.com>
 
-	s5p_goni	ARM ARMV7 (S5PC110 SoC)
-	SMDKC100	ARM ARMV7 (S5PC100 SoC)
+	SMDKC100		ARM ARMV7 (S5PC100 SoC)
+	s5p_goni		ARM ARMV7 (S5PC110 SoC)
+	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
 
 Frederik Kriewitz <frederik@kriewitz.eu>
 
diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile
new file mode 100644
index 0000000..0200220
--- /dev/null
+++ b/board/samsung/universal_c210/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= universal.o onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
new file mode 100644
index 0000000..67635bb
--- /dev/null
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -0,0 +1,395 @@
+/*
+ * Lowlevel setup for universal board based on S5PC210
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r11, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r7, =S5PC210_GPIO_PART1_BASE
+	ldr	r6, =S5PC210_GPIO_PART2_BASE
+
+	/* System Timer */
+	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r1, =0x5000
+	str	r1, [r0, #0x0]
+	ldr	r1, =0xffffffff
+	str	r1, [r0, #0x8]
+	ldr	r1, =0x49
+	str	r1, [r0, #0x4]
+
+	/* PMIC manual reset */
+	/* nPOWER: XEINT_23: GPX2[7] */
+	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)		@ Output
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	str	r5, [r0]
+
+	/* UART */
+	bl	uart_asm_init
+
+	/* PMU init */
+	bl	system_power_init
+
+	bl	tzpc_init
+
+	mov	lr, r11
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	/*
+	 * setup UART0-UART4 GPIOs (part1)
+	 * GPA1CON[3] = I2C_3_SCL (3)
+	 * GPA1CON[2] = I2C_3_SDA (3)
+	 */
+	mov	r0, r7
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	ldr	r1, =0x00223322
+	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+
+	/* UART_SEL GPY4[7] (part2) at S5PC210 */
+	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x8]
+	bic	r1, r1, #(0x3 << 14)		@ 14 = 7 * 2-bit
+	orr	r1, r1, #(0x3 << 14)		@ Pull-up enabled
+	str	r1, [r0, #0x8]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_clock_init:
+	ldr	r0, =S5PC210_CLOCK_BASE
+
+	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
+	ldr	r1, =0x0101
+	ldr	r2, =0x14200			@ CLK_SRC_CPU
+	str	r1, [r0, r2]
+
+	/* wait ?us */
+	mov	r1, #0x10000
+1:	subs	r1, r1, #1
+	bne	1b
+
+	/*
+	 * CLK_SRC_TOP0
+	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
+	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
+	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
+	 */
+	ldr	r1, =0x10000110
+	ldr	r2, =0x0C210			@ CLK_SRC_TOP
+	str	r1, [r0, r2]
+
+	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+	ldr	r1, =0x0066666
+	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
+	str	r1, [r0, r2]
+	/* UART[0:5], PWM: SCLKMPLL(6) */
+	ldr	r1, =0x6666666
+	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
+	str	r1, [r0, r2]
+
+	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
+	ldr	r1, =0x0133730
+	ldr	r2, =0x14500			@ CLK_DIV_CPU0
+	str	r1, [r0, r2]
+	/* CPU1: COPY, HPM */
+	ldr	r1, =0x03
+	ldr	r2, =0x14504			@ CLK_DIV_CPU1
+	str	r1, [r0, r2]
+	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
+	ldr	r1, =0x13111113
+	ldr	r2, =0x10500			@ CLK_DIV_DMC0
+	str	r1, [r0, r2]
+	/* DMC1: PWI, DVSEM, DPM */
+	ldr	r1, =0x01010100
+	ldr	r2, =0x10504			@ CLK_DIV_DMC1
+	str	r1, [r0, r2]
+	/* LEFTBUS: GDL, GPL */
+	ldr	r1, =0x13
+	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
+	str	r1, [r0, r2]
+	/* RIGHHTBUS: GDR, GPR */
+	ldr	r1, =0x13
+	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
+	str	r1, [r0, r2]
+	/*
+	 * CLK_DIV_TOP
+	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
+	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
+	 */
+	ldr	r1, =0x00005473
+	ldr	r2, =0x0C510			@ CLK_DIV_TOP
+	str	r1, [r0, r2]
+	/* MMC[0:1] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
+	str	r1, [r0, r2]
+	/* MMC[2:3] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
+	str	r1, [r0, r2]
+	/* MMC4 */
+	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
+	str	r1, [r0, r2]
+	/* UART[0:5] */
+	ldr	r1, =0x774777
+	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
+	str	r1, [r0, r2]
+	/* SLIMBUS: ???, PWM */
+	ldr	r1, =0x8
+	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
+	str	r1, [r0, r2]
+
+	/* PLL Setting */
+	ldr	r1, =0x1C20
+	ldr	r2, =0x14000			@ APLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x14008			@ MPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C010			@ EPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C020			@ VPLL_LOCK
+	str	r1, [r0, r2]
+
+	/* APLL */
+	ldr	r1, =0x8000001c
+	ldr	r2, =0x14104			@ APLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14100			@ APLL_CON0
+	str	r1, [r0, r2]
+	/* MPLL */
+	ldr	r1, =0x8000001C
+	ldr	r2, =0x1410C			@ MPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14108			@ MPLL_CON0
+	str	r1, [r0, r2]
+	/* EPLL */
+	ldr	r1, =0x0
+	ldr	r2, =0x0C114			@ EPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80300302			@ 96MHz
+	ldr	r2, =0x0C110			@ EPLL_CON0
+	str	r1, [r0, r2]
+	/* VPLL */
+	ldr	r1, =0x11000400
+	ldr	r2, =0x0C124			@ VPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80350302			@ 108MHz
+	ldr	r2, =0x0C120			@ VPLL_CON0
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
+	 * Turn off all
+	 */
+	ldr	r1, =0xFFF80000
+	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFE0
+	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFC00
+	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
+	str	r1, [r0, r2]
+
+	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
+	ldr	r1, =0xFFFFFFF1
+	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
+	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
+	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
+	 */
+	ldr	r1, =0xFFFAB8A3
+	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
+	str	r1, [r0, r2]
+
+	/*
+	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
+	 * I2C2[8]					: 1111 1110
+	 */
+	ldr	r1, =0xF1FFFEFF
+	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
+	str	r1, [r0, r2]
+
+	/*
+	 * KEYIF[16]					: 1111 1110
+	 */
+	ldr	r1, =0xFFFEFFFF
+	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
+	str	r1, [r0, r2]
+
+	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
+	ldr	r1, =0xFFFFFFD1
+	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
+	str	r1, [r0, r2]
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_power_init:
+	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+
+	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
+	ldr	r1, [r0, r2]
+	orr	r1, r1, #(0x3 << 8)		@ Data High, Output En
+	str	r1, [r0, r2]
+
+	/* Power Down */
+	add	r2, r0, #0x3000
+	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
+	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
+	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
+	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
+	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+tzpc_init:
+	ldr	r0, =0x10110000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10120000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10130000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10140000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10150000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	mov	pc, lr
diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c
new file mode 100644
index 0000000..20e1dc5
--- /dev/null
+++ b/board/samsung/universal_c210/onenand.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
new file mode 100644
index 0000000..639f0d1
--- /dev/null
+++ b/board/samsung/universal_c210/universal.c
@@ -0,0 +1,250 @@
+/*
+ *  Copyright (C) 2010 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/adc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+unsigned int board_rev;
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static int get_hwrev(void)
+{
+	return board_rev & 0xFF;
+}
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%x\n", board_rev);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+	gd->ram_size = gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size;
+}
+
+static unsigned short get_adc_value(int channel)
+{
+	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
+	unsigned short ret = 0;
+	unsigned int reg;
+	unsigned int loop = 0;
+
+	writel(channel & 0xF, &adc->adcmux);
+	writel((1 << 14) | (49 << 6), &adc->adccon);
+	writel(1000 & 0xffff, &adc->adcdly);
+	writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
+	udelay(10);
+	writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
+	udelay(10);
+
+	do {
+		udelay(1);
+		reg = readl(&adc->adccon);
+	} while (!(reg & (1 << 15)) && (loop++ < 1000));
+
+	ret = readl(&adc->adcdat0) & 0xFFF;
+
+	return ret;
+}
+
+static unsigned int get_hw_revision(void)
+{
+	int hwrev, mode0, mode1;
+
+	mode0 = get_adc_value(1);		/* HWREV_MODE0 */
+	mode1 = get_adc_value(2);		/* HWREV_MODE1 */
+
+	/*
+	 * XXX Always set the default hwrev as the latest board
+	 * ADC = (voltage) / 3.3 * 4096
+	 */
+	hwrev = 3;
+
+#define IS_RANGE(x, min, max)	((x) > (min) && (x) < (max))
+	if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x0;		/* 0.01V	0.01V */
+	if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x1;		/* 610mV	0.01V */
+	if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x2;		/* 1.16V	0.01V */
+	if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x3;		/* 1.79V	0.01V */
+#undef IS_RANGE
+
+	debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+
+	return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+	int hwrev;
+
+	hwrev = get_hw_revision();
+
+	board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tUniversal C210\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	switch (get_hwrev()) {
+	case 0:
+		/*
+		 * Set the low to enable LDO_EN
+		 * But when you use the test board for eMMC booting
+		 * you should set it HIGH since it removes the inverter
+		 */
+		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
+		gpio_direction_output(&gpio1->e3, 6, 0);
+		break;
+	default:
+		/*
+		 * Default reset state is High and there's no inverter
+		 * But set it as HIGH to ensure
+		 */
+		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
+		gpio_direction_output(&gpio1->e1, 3, 1);
+		break;
+	}
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]	SD_0_CLK(2)
+	 * GPK0[1]	SD_0_CMD(2)
+	 * GPK0[2]	SD_0_CDn	-> Not used
+	 * GPK0[3:6]	SD_0_DATA[0:3](2)
+	 * GPK1[3:6]	SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]	SD_4_CLK(3)
+	 * GPK0[1]	SD_4_CMD(3)
+	 * GPK0[2]	SD_4_CDn	-> Not used
+	 * GPK0[3:6]	SD_4_DATA[0:3](3)
+	 * GPK1[3:6]	SD_4_DATA[4:7](4)
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPK0[0:6] special function 2 */
+		gpio_cfg_pin(&gpio2->k0, i, 0x2);
+		/* GPK0[0:6] pull disable */
+		gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+		/* GPK0[0:6] drv 4x */
+		gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i < 7; i++) {
+		/* GPK1[3:6] special function 3 */
+		gpio_cfg_pin(&gpio2->k1, i, 0x3);
+		/* GPK1[3:6] pull disable */
+		gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+		/* GPK1[3:6] drv 4x */
+		gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+	}
+
+	/* T-flash detect */
+	gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+	gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+
+	/*
+	 * MMC device init
+	 * mmc0	 : eMMC (8-bit buswidth)
+	 * mmc2	 : SD card (4-bit buswidth)
+	 */
+	err = s5p_mmc_init(0, 8);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[4] T-flash detect pin
+	 */
+	if (!gpio_get_value(&gpio2->x3, 4)) {
+		/*
+		 * SD card GPIO:
+		 * GPK2[0]	SD_2_CLK(2)
+		 * GPK2[1]	SD_2_CMD(2)
+		 * GPK2[2]	SD_2_CDn	-> Not used
+		 * GPK2[3:6]	SD_2_DATA[0:3](2)
+		 */
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+			/* GPK2[0:6] special function 2 */
+			gpio_cfg_pin(&gpio2->k2, i, 0x2);
+			/* GPK2[0:6] pull disable */
+			gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			/* GPK2[0:6] drv 4x */
+			gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		}
+		err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index da115f7..f8c0dcd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -123,6 +123,7 @@ omap4_panda                  arm         armv7       panda               ti
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
 actux1                       arm         ixp
 actux2                       arm         ixp
 actux3                       arm         ixp
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
new file mode 100644
index 0000000..f9d371a
--- /dev/null
+++ b/include/configs/s5pc210_universal.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5P		1	/* which is in a S5P Family */
+#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
+#define CONFIG_UNIVERSAL	1	/* working with Universal */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x44800000
+
+/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+#define CONFIG_SYS_CLK_FREQ_C210	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_SERIAL2		1	/* use SERIAL 2 */
+#define CONFIG_BAUDRATE		115200
+
+/* MMC */
+#define CONFIG_GENERIC_MMC	1
+#define CONFIG_MMC		1
+#define CONFIG_S5P_MMC		1
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
+				"128k(s-boot)"\
+				",896k(bootloader)"\
+				",256k(params)"\
+				",2816k(config)"\
+				",8m(csa)"\
+				",7m(kernel)"\
+				",1m(log)"\
+				",12m(modem)"\
+				",60m(qboot)"\
+				",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+				"${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"updateb=" \
+		"onenand erase 0x0 0x100000;" \
+		"onenand write 0x42008000 0x0 0x100000\0" \
+	"updatek=" \
+		"onenand erase 0xc00000 0x500000;" \
+		"onenand write 0x41008000 0xc00000 0x500000\0" \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+	"tftpboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT \
+		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mtdparts=" MTDPARTS_DEFAULT \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M at 0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"ubi=enabled\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=3\0" \
+	"opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT	"Universal # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE	(256 << 10)	/* regular stack 256KB */
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+
+#define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SYS_ONENAND_BASE		0x0C000000
+
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#endif	/* __CONFIG_H */
-- 
1.7.1

[U-Boot] [PATCH v2 2/2] armv7: add support for s5pc210 universal board

[seedshope]

On 01/13/2011 06:16 PM, Minkyu Kang wrote:
> This patch adds support for Samsung s5pc210 universal board
>
> Signed-off-by: Minkyu Kang<mk7.kang@samsung.com>
> Signed-off-by: Kyungmin Park<kyungmin.park@samsung.com>
> ---
> v2
>   remove debug message
>
>   MAINTAINERS                                  |    5 +-
>   MAKEALL                                      |    1 +
>   board/samsung/universal_c210/Makefile        |   51 ++++
>   board/samsung/universal_c210/config.mk       |   24 ++
>   board/samsung/universal_c210/lowlevel_init.S |  395 ++++++++++++++++++++++++++
>   board/samsung/universal_c210/onenand.c       |   34 +++
>   board/samsung/universal_c210/universal.c     |  250 ++++++++++++++++
>   boards.cfg                                   |    1 +
>   include/configs/s5pc210_universal.h          |  248 ++++++++++++++++
>   9 files changed, 1007 insertions(+), 2 deletions(-)
>   create mode 100644 board/samsung/universal_c210/Makefile
>   create mode 100644 board/samsung/universal_c210/config.mk
>   create mode 100644 board/samsung/universal_c210/lowlevel_init.S
>   create mode 100644 board/samsung/universal_c210/onenand.c
>   create mode 100644 board/samsung/universal_c210/universal.c
>   create mode 100644 include/configs/s5pc210_universal.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a5f0493..6eed120 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -672,8 +672,9 @@ Nishant Kamat<nskamat@ti.com>
>
>   Minkyu Kang<mk7.kang@samsung.com>
>
> -	s5p_goni	ARM ARMV7 (S5PC110 SoC)
> -	SMDKC100	ARM ARMV7 (S5PC100 SoC)
> +	SMDKC100		ARM ARMV7 (S5PC100 SoC)
> +	s5p_goni		ARM ARMV7 (S5PC110 SoC)
> +	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
>
>   Frederik Kriewitz<frederik@kriewitz.eu>
>
> diff --git a/MAKEALL b/MAKEALL
> index a732e6a..a5b265f 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -434,6 +434,7 @@ LIST_ARMV7="		\
>   	omap4_panda		\
>   	omap4_sdp4430		\
>   	s5p_goni		\
> +	s5pc210_universal	\
>   	smdkc100		\
>   "
>
> diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile
> new file mode 100644
> index 0000000..0200220
> --- /dev/null
> +++ b/board/samsung/universal_c210/Makefile
> @@ -0,0 +1,51 @@
> +#
> +# Copyright (C) 2010 Samsung Electronics
> +# Minkyu Kang<mk7.kang@samsung.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +COBJS-y	:= universal.o onenand.o
> +SOBJS	:= lowlevel_init.o
> +
> +SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS-y))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
> +	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/samsung/universal_c210/config.mk b/board/samsung/universal_c210/config.mk
> new file mode 100644
> index 0000000..0ecd716
> --- /dev/null
> +++ b/board/samsung/universal_c210/config.mk
> @@ -0,0 +1,24 @@
> +#
> +# Copyright (C) 2010 Samsung Electronics
> +# Kyungmin Park<kyungmin.park@samsung.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +CONFIG_SYS_TEXT_BASE = 0x44800000
> diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
> new file mode 100644
> index 0000000..67635bb
> --- /dev/null
> +++ b/board/samsung/universal_c210/lowlevel_init.S
> @@ -0,0 +1,395 @@
> +/*
> + * Lowlevel setup for universal board based on S5PC210
> + *
> + * Copyright (C) 2010 Samsung Electronics
> + * Kyungmin Park<kyungmin.park@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include<config.h>
> +#include<version.h>
> +#include<asm/arch/cpu.h>
> +#include<asm/arch/clock.h>
> +
> +/*
> + * Register usages:
> + *
> + * r5 has zero always
> + * r7 has GPIO part1 base 0x11400000
> + * r6 has GPIO part2 base 0x11000000
> + */
> +
> +	.globl lowlevel_init
> +lowlevel_init:
> +	mov	r11, lr
> +
> +	/* r5 has always zero */
> +	mov	r5, #0
> +
> +	ldr	r7, =S5PC210_GPIO_PART1_BASE
> +	ldr	r6, =S5PC210_GPIO_PART2_BASE
> +
> +	/* System Timer */
> +	ldr	r0, =S5PC210_SYSTIMER_BASE
> +	ldr	r1, =0x5000
> +	str	r1, [r0, #0x0]
> +	ldr	r1, =0xffffffff
> +	str	r1, [r0, #0x8]
> +	ldr	r1, =0x49
> +	str	r1, [r0, #0x4]
> +
> +	/* PMIC manual reset */
> +	/* nPOWER: XEINT_23: GPX2[7] */
> +	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
> +	ldr	r1, [r0, #0x0]
> +	bic	r1, r1, #(0xf<<  28)		@ 28 = 7 * 4-bit
> +	orr	r1, r1, #(0x1<<  28)		@ Output
> +	str	r1, [r0, #0x0]
> +
> +	ldr	r1, [r0, #0x4]
> +	orr	r1, r1, #(1<<  7)		@ 7 = 7 * 1-bit
> +	str	r1, [r0, #0x4]
> +
> +	/* init system clock */
> +	bl	system_clock_init
> +
> +	/* Disable Watchdog */
> +	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
> +	str	r5, [r0]
> +
> +	/* UART */
> +	bl	uart_asm_init
> +
> +	/* PMU init */
> +	bl	system_power_init
> +
> +	bl	tzpc_init
> +
> +	mov	lr, r11
> +	mov	pc, lr
> +	nop
> +	nop
> +	nop
> +
> +/*
> + * uart_asm_init: Initialize UART's pins
> + */
> +uart_asm_init:
> +	/*
> +	 * setup UART0-UART4 GPIOs (part1)
> +	 * GPA1CON[3] = I2C_3_SCL (3)
> +	 * GPA1CON[2] = I2C_3_SDA (3)
> +	 */
> +	mov	r0, r7
> +	ldr	r1, =0x22222222
> +	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
> +	ldr	r1, =0x00223322
> +	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
> +
> +	/* UART_SEL GPY4[7] (part2) at S5PC210 */
> +	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
> +	ldr	r1, [r0, #0x0]
> +	bic	r1, r1, #(0xf<<  28)		@ 28 = 7 * 4-bit
> +	orr	r1, r1, #(0x1<<  28)
> +	str	r1, [r0, #0x0]
> +
> +	ldr	r1, [r0, #0x8]
> +	bic	r1, r1, #(0x3<<  14)		@ 14 = 7 * 2-bit
> +	orr	r1, r1, #(0x3<<  14)		@ Pull-up enabled
> +	str	r1, [r0, #0x8]
> +
> +	ldr	r1, [r0, #0x4]
> +	orr	r1, r1, #(1<<  7)		@ 7 = 7 * 1-bit
> +	str	r1, [r0, #0x4]
> +
> +	mov	pc, lr
> +	nop
> +	nop
> +	nop
> +
> +system_clock_init:
> +	ldr	r0, =S5PC210_CLOCK_BASE
> +
> +	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
> +	ldr	r1, =0x0101
> +	ldr	r2, =0x14200			@ CLK_SRC_CPU
> +	str	r1, [r0, r2]
> +
> +	/* wait ?us */
> +	mov	r1, #0x10000
> +1:	subs	r1, r1, #1
> +	bne	1b
> +
> +	/*
> +	 * CLK_SRC_TOP0
> +	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
> +	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
> +	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
> +	 */
> +	ldr	r1, =0x10000110
> +	ldr	r2, =0x0C210			@ CLK_SRC_TOP
> +	str	r1, [r0, r2]
> +
> +	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
> +	ldr	r1, =0x0066666
> +	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
> +	str	r1, [r0, r2]
> +	/* UART[0:5], PWM: SCLKMPLL(6) */
> +	ldr	r1, =0x6666666
> +	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
> +	str	r1, [r0, r2]
> +
> +	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
> +	ldr	r1, =0x0133730
> +	ldr	r2, =0x14500			@ CLK_DIV_CPU0
> +	str	r1, [r0, r2]
> +	/* CPU1: COPY, HPM */
> +	ldr	r1, =0x03
> +	ldr	r2, =0x14504			@ CLK_DIV_CPU1
> +	str	r1, [r0, r2]
> +	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
> +	ldr	r1, =0x13111113
> +	ldr	r2, =0x10500			@ CLK_DIV_DMC0
> +	str	r1, [r0, r2]
> +	/* DMC1: PWI, DVSEM, DPM */
> +	ldr	r1, =0x01010100
> +	ldr	r2, =0x10504			@ CLK_DIV_DMC1
> +	str	r1, [r0, r2]
> +	/* LEFTBUS: GDL, GPL */
> +	ldr	r1, =0x13
> +	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
> +	str	r1, [r0, r2]
> +	/* RIGHHTBUS: GDR, GPR */
> +	ldr	r1, =0x13
> +	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
> +	str	r1, [r0, r2]
> +	/*
> +	 * CLK_DIV_TOP
> +	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
> +	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
> +	 */
> +	ldr	r1, =0x00005473
> +	ldr	r2, =0x0C510			@ CLK_DIV_TOP
> +	str	r1, [r0, r2]
> +	/* MMC[0:1] */
> +	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
> +	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
> +	str	r1, [r0, r2]
> +	/* MMC[2:3] */
> +	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
> +	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
> +	str	r1, [r0, r2]
> +	/* MMC4 */
> +	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
> +	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
> +	str	r1, [r0, r2]
> +	/* UART[0:5] */
> +	ldr	r1, =0x774777
> +	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
> +	str	r1, [r0, r2]
> +	/* SLIMBUS: ???, PWM */
> +	ldr	r1, =0x8
> +	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
> +	str	r1, [r0, r2]
> +
> +	/* PLL Setting */
> +	ldr	r1, =0x1C20
> +	ldr	r2, =0x14000			@ APLL_LOCK
> +	str	r1, [r0, r2]
> +	ldr	r2, =0x14008			@ MPLL_LOCK
> +	str	r1, [r0, r2]
> +	ldr	r2, =0x0C010			@ EPLL_LOCK
> +	str	r1, [r0, r2]
> +	ldr	r2, =0x0C020			@ VPLL_LOCK
> +	str	r1, [r0, r2]
> +
> +	/* APLL */
> +	ldr	r1, =0x8000001c
> +	ldr	r2, =0x14104			@ APLL_CON1
> +	str	r1, [r0, r2]
> +	ldr	r1, =0x80c80601			@ 800MHz
> +	ldr	r2, =0x14100			@ APLL_CON0
> +	str	r1, [r0, r2]
> +	/* MPLL */
> +	ldr	r1, =0x8000001C
> +	ldr	r2, =0x1410C			@ MPLL_CON1
> +	str	r1, [r0, r2]
> +	ldr	r1, =0x80c80601			@ 800MHz
> +	ldr	r2, =0x14108			@ MPLL_CON0
> +	str	r1, [r0, r2]
> +	/* EPLL */
> +	ldr	r1, =0x0
> +	ldr	r2, =0x0C114			@ EPLL_CON1
> +	str	r1, [r0, r2]
> +	ldr	r1, =0x80300302			@ 96MHz
> +	ldr	r2, =0x0C110			@ EPLL_CON0
> +	str	r1, [r0, r2]
> +	/* VPLL */
> +	ldr	r1, =0x11000400
> +	ldr	r2, =0x0C124			@ VPLL_CON1
> +	str	r1, [r0, r2]
> +	ldr	r1, =0x80350302			@ 108MHz
> +	ldr	r2, =0x0C120			@ VPLL_CON0
> +	str	r1, [r0, r2]
> +
> +	/*
> +	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
> +	 * Turn off all
> +	 */
> +	ldr	r1, =0xFFF80000
> +	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFFC0
> +	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFFE0
> +	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFFFC
> +	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFC00
> +	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
> +	str	r1, [r0, r2]
> +
> +	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
> +	ldr	r1, =0xFFFFFFF1
> +	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFFC0
> +	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
> +	str	r1, [r0, r2]
> +
> +	/*
> +	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
> +	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
> +	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
> +	 */
> +	ldr	r1, =0xFFFAB8A3
> +	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
> +	str	r1, [r0, r2]
> +
> +	/* Turn off all */
> +	ldr	r1, =0xFFFFFFFC
> +	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
> +	str	r1, [r0, r2]
> +
> +	/*
> +	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
> +	 * I2C2[8]					: 1111 1110
> +	 */
> +	ldr	r1, =0xF1FFFEFF
> +	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
> +	str	r1, [r0, r2]
> +
> +	/*
> +	 * KEYIF[16]					: 1111 1110
> +	 */
> +	ldr	r1, =0xFFFEFFFF
> +	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
> +	str	r1, [r0, r2]
> +
> +	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
> +	ldr	r1, =0xFFFFFFD1
> +	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
> +	str	r1, [r0, r2]
> +	mov	pc, lr
> +	nop
> +	nop
> +	nop
> +
> +system_power_init:
> +	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
> +
> +	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
> +	ldr	r1, [r0, r2]
> +	orr	r1, r1, #(0x3<<  8)		@ Data High, Output En
> +	str	r1, [r0, r2]
> +
> +	/* Power Down */
> +	add	r2, r0, #0x3000
> +	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
> +	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
> +	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
> +	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
> +	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
> +
> +	mov	pc, lr
> +	nop
> +	nop
> +	nop
> +
> +tzpc_init:
> +	ldr	r0, =0x10110000
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +	mov	r1, #0xff
> +	str	r1, [r0, #0x0804]
> +	str	r1, [r0, #0x0810]
> +	str	r1, [r0, #0x081C]
> +	str	r1, [r0, #0x0828]
> +
> +	ldr	r0, =0x10120000
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +	mov	r1, #0xff
> +	str	r1, [r0, #0x0804]
> +	str	r1, [r0, #0x0810]
> +	str	r1, [r0, #0x081C]
> +	str	r1, [r0, #0x0828]
> +
> +	ldr	r0, =0x10130000
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +	mov	r1, #0xff
> +	str	r1, [r0, #0x0804]
> +	str	r1, [r0, #0x0810]
> +	str	r1, [r0, #0x081C]
> +	str	r1, [r0, #0x0828]
> +
> +	ldr	r0, =0x10140000
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +	mov	r1, #0xff
> +	str	r1, [r0, #0x0804]
> +	str	r1, [r0, #0x0810]
> +	str	r1, [r0, #0x081C]
> +	str	r1, [r0, #0x0828]
> +
> +	ldr	r0, =0x10150000
> +	mov	r1, #0x0
> +	str	r1, [r0]
> +	mov	r1, #0xff
> +	str	r1, [r0, #0x0804]
> +	str	r1, [r0, #0x0810]
> +	str	r1, [r0, #0x081C]
> +	str	r1, [r0, #0x0828]
> +
> +	mov	pc, lr
> diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c
> new file mode 100644
> index 0000000..20e1dc5
> --- /dev/null
> +++ b/board/samsung/universal_c210/onenand.c
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (C) 2010 Samsung Electronics
> + * Kyungmin Park<kyungmin.park@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include<common.h>
> +#include<linux/mtd/mtd.h>
> +#include<linux/mtd/onenand.h>
> +
> +void onenand_board_init(struct mtd_info *mtd)
> +{
> +	struct onenand_chip *this = mtd->priv;
> +
> +	this->base = (void *)CONFIG_SYS_ONENAND_BASE;
> +	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
> +}
> diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
> new file mode 100644
> index 0000000..639f0d1
> --- /dev/null
> +++ b/board/samsung/universal_c210/universal.c
> @@ -0,0 +1,250 @@
> +/*
> + *  Copyright (C) 2010 Samsung Electronics
> + *  Minkyu Kang<mk7.kang@samsung.com>
> + *  Kyungmin Park<kyungmin.park@samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include<common.h>
> +#include<asm/io.h>
> +#include<asm/arch/adc.h>
> +#include<asm/arch/gpio.h>
> +#include<asm/arch/mmc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct s5pc210_gpio_part1 *gpio1;
> +struct s5pc210_gpio_part2 *gpio2;
> +unsigned int board_rev;
> +
> +u32 get_board_rev(void)
> +{
> +	return board_rev;
> +}
> +
> +static int get_hwrev(void)
> +{
> +	return board_rev&  0xFF;
> +}
> +
> +static void check_hw_revision(void);
> +
> +int board_init(void)
> +{
> +	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
> +	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
> +
> +	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
> +	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> +	check_hw_revision();
> +	printf("HW Revision:\t0x%x\n", board_rev);
> +
> +	return 0;
> +}
> +
> +int dram_init(void)
> +{
> +	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
It is shoule to use get_ram_size() function
> +	return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> +	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> +	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> +	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> +	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> +
> +	gd->ram_size = gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size;
I have a bit confused. Because dram_init have already init gd->ram_size.
> +}
> +
> +static unsigned short get_adc_value(int channel)
> +{
> +	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
> +	unsigned short ret = 0;
> +	unsigned int reg;
> +	unsigned int loop = 0;
> +
> +	writel(channel&  0xF,&adc->adcmux);
> +	writel((1<<  14) | (49<<  6),&adc->adccon);
> +	writel(1000&  0xffff,&adc->adcdly);
> +	writel(readl(&adc->adccon) | (1<<  16),&adc->adccon); /* 12 bit */
> +	udelay(10);
> +	writel(readl(&adc->adccon) | (1<<  0),&adc->adccon); /* Enable */
> +	udelay(10);
> +
> +	do {
> +		udelay(1);
> +		reg = readl(&adc->adccon);
> +	} while (!(reg&  (1<<  15))&&  (loop++<  1000));
> +
> +	ret = readl(&adc->adcdat0)&  0xFFF;
> +
> +	return ret;
> +}
> +
> +static unsigned int get_hw_revision(void)
> +{
> +	int hwrev, mode0, mode1;
> +
> +	mode0 = get_adc_value(1);		/* HWREV_MODE0 */
> +	mode1 = get_adc_value(2);		/* HWREV_MODE1 */
> +
> +	/*
> +	 * XXX Always set the default hwrev as the latest board
> +	 * ADC = (voltage) / 3.3 * 4096
> +	 */
> +	hwrev = 3;
> +
> +#define IS_RANGE(x, min, max)	((x)>  (min)&&  (x)<  (max))
> +	if (IS_RANGE(mode0, 80, 200)&&  IS_RANGE(mode1, 80, 200))
> +		hwrev = 0x0;		/* 0.01V	0.01V */
> +	if (IS_RANGE(mode0, 750, 1000)&&  IS_RANGE(mode1, 80, 200))
> +		hwrev = 0x1;		/* 610mV	0.01V */
> +	if (IS_RANGE(mode0, 1300, 1700)&&  IS_RANGE(mode1, 80, 200))
> +		hwrev = 0x2;		/* 1.16V	0.01V */
> +	if (IS_RANGE(mode0, 2000, 2400)&&  IS_RANGE(mode1, 80, 200))
> +		hwrev = 0x3;		/* 1.79V	0.01V */
> +#undef IS_RANGE
> +
> +	debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
> +
> +	return hwrev;
> +}
> +
> +static void check_hw_revision(void)
> +{
> +	int hwrev;
> +
> +	hwrev = get_hw_revision();
> +
> +	board_rev |= hwrev;
> +}
> +
> +#ifdef CONFIG_DISPLAY_BOARDINFO
> +int checkboard(void)
> +{
> +	puts("Board:\tUniversal C210\n");
> +	return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> +	int i, err;
> +
> +	switch (get_hwrev()) {
> +	case 0:
> +		/*
> +		 * Set the low to enable LDO_EN
> +		 * But when you use the test board for eMMC booting
> +		 * you should set it HIGH since it removes the inverter
> +		 */
> +		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
> +		gpio_direction_output(&gpio1->e3, 6, 0);
> +		break;
> +	default:
> +		/*
> +		 * Default reset state is High and there's no inverter
> +		 * But set it as HIGH to ensure
> +		 */
> +		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
> +		gpio_direction_output(&gpio1->e1, 3, 1);
> +		break;
> +	}
> +
> +	/*
> +	 * eMMC GPIO:
> +	 * SDR 8-bit at 48MHz at MMC0
> +	 * GPK0[0]	SD_0_CLK(2)
> +	 * GPK0[1]	SD_0_CMD(2)
> +	 * GPK0[2]	SD_0_CDn	->  Not used
> +	 * GPK0[3:6]	SD_0_DATA[0:3](2)
> +	 * GPK1[3:6]	SD_0_DATA[0:3](3)
> +	 *
> +	 * DDR 4-bit at 26MHz at MMC4
> +	 * GPK0[0]	SD_4_CLK(3)
> +	 * GPK0[1]	SD_4_CMD(3)
> +	 * GPK0[2]	SD_4_CDn	->  Not used
> +	 * GPK0[3:6]	SD_4_DATA[0:3](3)
> +	 * GPK1[3:6]	SD_4_DATA[4:7](4)
> +	 */
> +	for (i = 0; i<  7; i++) {
> +		if (i == 2)
> +			continue;
> +		/* GPK0[0:6] special function 2 */
> +		gpio_cfg_pin(&gpio2->k0, i, 0x2);
> +		/* GPK0[0:6] pull disable */
> +		gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
> +		/* GPK0[0:6] drv 4x */
> +		gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
> +	}
> +
> +	for (i = 3; i<  7; i++) {
> +		/* GPK1[3:6] special function 3 */
> +		gpio_cfg_pin(&gpio2->k1, i, 0x3);
> +		/* GPK1[3:6] pull disable */
> +		gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
> +		/* GPK1[3:6] drv 4x */
> +		gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
> +	}
> +
> +	/* T-flash detect */
> +	gpio_cfg_pin(&gpio2->x3, 4, 0xf);
> +	gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
> +
> +	/*
> +	 * MMC device init
> +	 * mmc0	 : eMMC (8-bit buswidth)
> +	 * mmc2	 : SD card (4-bit buswidth)
> +	 */
> +	err = s5p_mmc_init(0, 8);
> +
> +	/*
> +	 * Check the T-flash  detect pin
> +	 * GPX3[4] T-flash detect pin
> +	 */
> +	if (!gpio_get_value(&gpio2->x3, 4)) {
> +		/*
> +		 * SD card GPIO:
> +		 * GPK2[0]	SD_2_CLK(2)
> +		 * GPK2[1]	SD_2_CMD(2)
> +		 * GPK2[2]	SD_2_CDn	->  Not used
> +		 * GPK2[3:6]	SD_2_DATA[0:3](2)
> +		 */
> +		for (i = 0; i<  7; i++) {
> +			if (i == 2)
> +				continue;
> +			/* GPK2[0:6] special function 2 */
> +			gpio_cfg_pin(&gpio2->k2, i, 0x2);
> +			/* GPK2[0:6] pull disable */
> +			gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
> +			/* GPK2[0:6] drv 4x */
> +			gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
> +		}
> +		err = s5p_mmc_init(2, 4);
> +	}
> +
> +	return err;
> +
> +}
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index da115f7..f8c0dcd 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -123,6 +123,7 @@ omap4_panda                  arm         armv7       panda               ti
>   omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
>   s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
>   smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
> +s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
>   actux1                       arm         ixp
>   actux2                       arm         ixp
>   actux3                       arm         ixp
> diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
> new file mode 100644
> index 0000000..eca6915
> --- /dev/null
> +++ b/include/configs/s5pc210_universal.h
> @@ -0,0 +1,248 @@
> +/*
> + * Copyright (C) 2010 Samsung Electronics
> + * Minkyu Kang<mk7.kang@samsung.com>
> + *
> + * Configuation settings for the SAMSUNG Universal (s5pc100) board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
> + * (easy to change)
> + */
> +#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
> +#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
> +#define CONFIG_S5P		1	/* which is in a S5P Family */
> +#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
> +#define CONFIG_UNIVERSAL	1	/* working with Universal */
> +
> +#include<asm/arch/cpu.h>		/* get chip and board defs */
> +
> +#define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +
> +/* Keep L2 Cache Disabled */
> +#define CONFIG_L2_OFF			1
> +
> +#define CONFIG_SYS_SDRAM_BASE	0x40000000
> +
> +/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
> +#define CONFIG_SYS_CLK_FREQ_C210	24000000
> +
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_CMDLINE_EDITING
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1<<  20))
> +
> +/*
> + * select serial console configuration
> + */
> +#define CONFIG_SERIAL_MULTI	1
> +#define CONFIG_SERIAL2          1	/* use SERIAL 2 */
> +#define CONFIG_BAUDRATE		115200
> +
> +/* MMC */
> +#define CONFIG_GENERIC_MMC	1
> +#define CONFIG_MMC		1
> +#define CONFIG_S5P_MMC		1
> +
> +/* It should define before config_cmd_default.h */
> +#define CONFIG_SYS_NO_FLASH		1
> +
> +/* Command definition */
> +#include<config_cmd_default.h>
> +
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_MISC
> +#undef CONFIG_CMD_NET
> +#undef CONFIG_CMD_NFS
> +#undef CONFIG_CMD_XIMG
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_ONENAND
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_FAT
> +
> +#define CONFIG_BOOTDELAY		1
> +#define CONFIG_ZERO_BOOTDELAY_CHECK
> +
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +
> +/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
> +#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
> +
> +#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
> +				"128k(s-boot)"\
> +				",896k(bootloader)"\
> +				",256k(params)"\
> +				",2816k(config)"\
> +				",8m(csa)"\
> +				",7m(kernel)"\
> +				",1m(log)"\
> +				",12m(modem)"\
> +				",60m(qboot)"\
> +				",-(UBI)\0"
> +
> +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
> +
> +#define MBRPARTS_DEFAULT	"20M(permanent)"\
> +				",20M(boot)"\
> +				",1G(system)"\
> +				",100M(swap)"\
> +				",-(UMS)\0"
> +
> +#define CONFIG_BOOTARGS		"Please use defined boot"
> +#define CONFIG_BOOTCOMMAND	"run mmcboot"
> +#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
> +
> +#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
> +#define CONFIG_BOOTBLOCK	"10"
> +#define CONFIG_UBIBLOCK		"9"
> +
> +#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
> +#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
> +				"${mtdparts}"
> +
> +#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
> +
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_ENV_AUTOSAVE
> +#define CONFIG_SYS_CONSOLE_INFO_QUIET
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS					\
> +	"updateb=" \
> +		"onenand erase 0x0 0x100000;" \
> +		"onenand write 0x42008000 0x0 0x100000\0" \
> +	"updatek=" \
> +		"onenand erase 0xc00000 0x500000;" \
> +		"onenand write 0x41008000 0xc00000 0x500000\0" \
> +	"bootk=" \
> +		"run loaduimage; bootm 0x40007FC0\0" \
> +	"updatemmc=" \
> +		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
> +		"mmc boot 0 1 1 0\0" \
> +	"updatebackup=" \
> +		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
> +		"mmc boot 0 1 1 0\0" \
> +	"updatebootb=" \
> +		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
> +	"lpj=lpj=3981312\0" \
> +	"ubifsboot=" \
> +		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
> +		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
> +		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
> +	"tftpboot=" \
> +		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
> +		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
> +		CONFIG_ENV_COMMON_BOOT \
> +		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
> +	"nfsboot=" \
> +		"set bootargs root=/dev/nfs rw " \
> +		"nfsroot=${nfsroot},nolock,tcp " \
> +		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
> +		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
> +		"; run bootk\0" \
> +	"ramfsboot=" \
> +		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
> +		"${console} ${meminfo} " \
> +		"initrd=0x43000000,8M ramdisk=8192\0" \
> +	"mmcboot=" \
> +		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
> +		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
> +		"run loaduimage; bootm 0x40007FC0\0" \
> +	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
> +	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
> +	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
> +	"verify=n\0" \
> +	"rootfstype=ext4\0" \
> +	"console=" CONFIG_DEFAULT_CONSOLE \
> +	"mtdparts=" MTDPARTS_DEFAULT \
> +	"mbrparts=" MBRPARTS_DEFAULT \
> +	"meminfo=crashkernel=32M at 0x50000000\0" \
> +	"nfsroot=/nfsroot/arm\0" \
> +	"bootblock=" CONFIG_BOOTBLOCK "\0" \
> +	"ubiblock=" CONFIG_UBIBLOCK" \0" \
> +	"ubi=enabled\0" \
> +	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
> +	"mmcdev=0\0" \
> +	"mmcbootpart=2\0" \
> +	"mmcrootpart=3\0" \
> +	"opts=always_resume=1"
> +
> +/* Miscellaneous configurable options */
> +#define CONFIG_SYS_LONGHELP		/* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
> +#define CONFIG_SYS_PROMPT_HUSH_PS2	">  "
> +#define CONFIG_SYS_PROMPT	"Universal # "
> +#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
> +#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
> +#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
> +/* memtest works on */
> +#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
> +#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
> +
> +#define CONFIG_SYS_HZ			1000
> +
> +/* valid baudrates */
> +#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
> +
> +/* Stack sizes */
> +#define CONFIG_STACKSIZE	(256<<  10)	/* regular stack 256KB */
> +
> +/* Universal has 2 banks of DRAM */
> +#define CONFIG_NR_DRAM_BANKS	2
> +#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
> +#define PHYS_SDRAM_1_SIZE	(256<<  20)		/* 256 MB in CS 0 */
> +#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
> +#define PHYS_SDRAM_2_SIZE	(256<<  20)		/* 256 MB in CS 0 */
> +
> +#define CONFIG_SYS_MEM_TOP_HIDE	(1<<  20)	/* 1MB for ram console */
> +
> +#define CONFIG_SYS_MONITOR_BASE	0x00000000
> +#define CONFIG_SYS_MONITOR_LEN		(256<<  10)	/* Reserve 2 sectors */
> +
> +#define CONFIG_USE_ONENAND_BOARD_INIT
> +#define CONFIG_SYS_ONENAND_BASE		0x0C000000
> +
> +#define CONFIG_ENV_IS_IN_MMC		1
> +#define CONFIG_SYS_MMC_ENV_DEV		0
> +#define CONFIG_ENV_SIZE			4096
> +#define CONFIG_ENV_OFFSET		((32 - 4)<<  10)/* 32KiB - 4KiB */
> +
> +#define CONFIG_DOS_PARTITION	1
> +
> +#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
Why sub  0x1000000, I remember The reserve space is manly for GBL data,
I feel It is only to sub GENERATED_GBL_DATA_SIZE.

Thanks,
seedshope
> +
> +#endif	/* __CONFIG_H */

[U-Boot] [PATCH v2 2/2] armv7: add support for s5pc210 universal board

[Wolfgang Denk]

Dear seedshope,

In message <4D3841B2.8050102@gmail.com> you wrote:
...
> > +int dram_init(void)
> > +{
> > +	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE;
> It is shoule to use get_ram_size() function

This, like the others, are valid comments - but:

Can you please explain why you have to quote all the 1000+
unrelated lines of the patch?

It is even difficult to spot your 4 lines of comments in 1000+ lines
of quoted patch.  Plase don't do that.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
He had quite a powerful intellect, but it  was  as  powerful  like  a
locomotive,  and  ran on rails and was therefore almost impossible to
steer.                          - Terry Pratchett, _Lords and Ladies_

[U-Boot] [PATCH v4 3/3] armv7: add support for s5pc210 universal board

[Minkyu Kang]

This patch adds support for Samsung s5pc210 universal board

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
v4
 use get_ram_size function
 fix the sp address
v3
 remove config.mk
 don't add board to MAKEALL
v2
 remove debug message

 MAINTAINERS                                  |    5 +-
 board/samsung/universal_c210/Makefile        |   51 ++++
 board/samsung/universal_c210/lowlevel_init.S |  395 ++++++++++++++++++++++++++
 board/samsung/universal_c210/onenand.c       |   34 +++
 board/samsung/universal_c210/universal.c     |  250 ++++++++++++++++
 boards.cfg                                   |    1 +
 include/configs/s5pc210_universal.h          |  244 ++++++++++++++++
 7 files changed, 978 insertions(+), 2 deletions(-)
 create mode 100644 board/samsung/universal_c210/Makefile
 create mode 100644 board/samsung/universal_c210/lowlevel_init.S
 create mode 100644 board/samsung/universal_c210/onenand.c
 create mode 100644 board/samsung/universal_c210/universal.c
 create mode 100644 include/configs/s5pc210_universal.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a5f0493..55977d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -672,8 +672,9 @@ Nishant Kamat <nskamat@ti.com>
 
 Minkyu Kang <mk7.kang@samsung.com>
 
-	s5p_goni	ARM ARMV7 (S5PC110 SoC)
-	SMDKC100	ARM ARMV7 (S5PC100 SoC)
+	SMDKC100		ARM ARMV7 (S5PC100 SoC)
+	s5p_goni		ARM ARMV7 (S5PC110 SoC)
+	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
 
 Frederik Kriewitz <frederik@kriewitz.eu>
 
diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile
new file mode 100644
index 0000000..0200220
--- /dev/null
+++ b/board/samsung/universal_c210/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= universal.o onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
new file mode 100644
index 0000000..67635bb
--- /dev/null
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -0,0 +1,395 @@
+/*
+ * Lowlevel setup for universal board based on S5PC210
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r11, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r7, =S5PC210_GPIO_PART1_BASE
+	ldr	r6, =S5PC210_GPIO_PART2_BASE
+
+	/* System Timer */
+	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r1, =0x5000
+	str	r1, [r0, #0x0]
+	ldr	r1, =0xffffffff
+	str	r1, [r0, #0x8]
+	ldr	r1, =0x49
+	str	r1, [r0, #0x4]
+
+	/* PMIC manual reset */
+	/* nPOWER: XEINT_23: GPX2[7] */
+	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)		@ Output
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	str	r5, [r0]
+
+	/* UART */
+	bl	uart_asm_init
+
+	/* PMU init */
+	bl	system_power_init
+
+	bl	tzpc_init
+
+	mov	lr, r11
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	/*
+	 * setup UART0-UART4 GPIOs (part1)
+	 * GPA1CON[3] = I2C_3_SCL (3)
+	 * GPA1CON[2] = I2C_3_SDA (3)
+	 */
+	mov	r0, r7
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	ldr	r1, =0x00223322
+	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+
+	/* UART_SEL GPY4[7] (part2) at S5PC210 */
+	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x8]
+	bic	r1, r1, #(0x3 << 14)		@ 14 = 7 * 2-bit
+	orr	r1, r1, #(0x3 << 14)		@ Pull-up enabled
+	str	r1, [r0, #0x8]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_clock_init:
+	ldr	r0, =S5PC210_CLOCK_BASE
+
+	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
+	ldr	r1, =0x0101
+	ldr	r2, =0x14200			@ CLK_SRC_CPU
+	str	r1, [r0, r2]
+
+	/* wait ?us */
+	mov	r1, #0x10000
+1:	subs	r1, r1, #1
+	bne	1b
+
+	/*
+	 * CLK_SRC_TOP0
+	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
+	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
+	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
+	 */
+	ldr	r1, =0x10000110
+	ldr	r2, =0x0C210			@ CLK_SRC_TOP
+	str	r1, [r0, r2]
+
+	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+	ldr	r1, =0x0066666
+	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
+	str	r1, [r0, r2]
+	/* UART[0:5], PWM: SCLKMPLL(6) */
+	ldr	r1, =0x6666666
+	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
+	str	r1, [r0, r2]
+
+	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
+	ldr	r1, =0x0133730
+	ldr	r2, =0x14500			@ CLK_DIV_CPU0
+	str	r1, [r0, r2]
+	/* CPU1: COPY, HPM */
+	ldr	r1, =0x03
+	ldr	r2, =0x14504			@ CLK_DIV_CPU1
+	str	r1, [r0, r2]
+	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
+	ldr	r1, =0x13111113
+	ldr	r2, =0x10500			@ CLK_DIV_DMC0
+	str	r1, [r0, r2]
+	/* DMC1: PWI, DVSEM, DPM */
+	ldr	r1, =0x01010100
+	ldr	r2, =0x10504			@ CLK_DIV_DMC1
+	str	r1, [r0, r2]
+	/* LEFTBUS: GDL, GPL */
+	ldr	r1, =0x13
+	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
+	str	r1, [r0, r2]
+	/* RIGHHTBUS: GDR, GPR */
+	ldr	r1, =0x13
+	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
+	str	r1, [r0, r2]
+	/*
+	 * CLK_DIV_TOP
+	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
+	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
+	 */
+	ldr	r1, =0x00005473
+	ldr	r2, =0x0C510			@ CLK_DIV_TOP
+	str	r1, [r0, r2]
+	/* MMC[0:1] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
+	str	r1, [r0, r2]
+	/* MMC[2:3] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
+	str	r1, [r0, r2]
+	/* MMC4 */
+	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
+	str	r1, [r0, r2]
+	/* UART[0:5] */
+	ldr	r1, =0x774777
+	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
+	str	r1, [r0, r2]
+	/* SLIMBUS: ???, PWM */
+	ldr	r1, =0x8
+	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
+	str	r1, [r0, r2]
+
+	/* PLL Setting */
+	ldr	r1, =0x1C20
+	ldr	r2, =0x14000			@ APLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x14008			@ MPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C010			@ EPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C020			@ VPLL_LOCK
+	str	r1, [r0, r2]
+
+	/* APLL */
+	ldr	r1, =0x8000001c
+	ldr	r2, =0x14104			@ APLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14100			@ APLL_CON0
+	str	r1, [r0, r2]
+	/* MPLL */
+	ldr	r1, =0x8000001C
+	ldr	r2, =0x1410C			@ MPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14108			@ MPLL_CON0
+	str	r1, [r0, r2]
+	/* EPLL */
+	ldr	r1, =0x0
+	ldr	r2, =0x0C114			@ EPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80300302			@ 96MHz
+	ldr	r2, =0x0C110			@ EPLL_CON0
+	str	r1, [r0, r2]
+	/* VPLL */
+	ldr	r1, =0x11000400
+	ldr	r2, =0x0C124			@ VPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80350302			@ 108MHz
+	ldr	r2, =0x0C120			@ VPLL_CON0
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
+	 * Turn off all
+	 */
+	ldr	r1, =0xFFF80000
+	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFE0
+	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFC00
+	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
+	str	r1, [r0, r2]
+
+	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
+	ldr	r1, =0xFFFFFFF1
+	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
+	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
+	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
+	 */
+	ldr	r1, =0xFFFAB8A3
+	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
+	str	r1, [r0, r2]
+
+	/*
+	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
+	 * I2C2[8]					: 1111 1110
+	 */
+	ldr	r1, =0xF1FFFEFF
+	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
+	str	r1, [r0, r2]
+
+	/*
+	 * KEYIF[16]					: 1111 1110
+	 */
+	ldr	r1, =0xFFFEFFFF
+	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
+	str	r1, [r0, r2]
+
+	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
+	ldr	r1, =0xFFFFFFD1
+	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
+	str	r1, [r0, r2]
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_power_init:
+	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+
+	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
+	ldr	r1, [r0, r2]
+	orr	r1, r1, #(0x3 << 8)		@ Data High, Output En
+	str	r1, [r0, r2]
+
+	/* Power Down */
+	add	r2, r0, #0x3000
+	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
+	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
+	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
+	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
+	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+tzpc_init:
+	ldr	r0, =0x10110000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10120000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10130000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10140000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10150000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	mov	pc, lr
diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c
new file mode 100644
index 0000000..20e1dc5
--- /dev/null
+++ b/board/samsung/universal_c210/onenand.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
new file mode 100644
index 0000000..b65bc6e
--- /dev/null
+++ b/board/samsung/universal_c210/universal.c
@@ -0,0 +1,250 @@
+/*
+ *  Copyright (C) 2010 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/adc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+unsigned int board_rev;
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static int get_hwrev(void)
+{
+	return board_rev & 0xFF;
+}
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%x\n", board_rev);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+static unsigned short get_adc_value(int channel)
+{
+	struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
+	unsigned short ret = 0;
+	unsigned int reg;
+	unsigned int loop = 0;
+
+	writel(channel & 0xF, &adc->adcmux);
+	writel((1 << 14) | (49 << 6), &adc->adccon);
+	writel(1000 & 0xffff, &adc->adcdly);
+	writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
+	udelay(10);
+	writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
+	udelay(10);
+
+	do {
+		udelay(1);
+		reg = readl(&adc->adccon);
+	} while (!(reg & (1 << 15)) && (loop++ < 1000));
+
+	ret = readl(&adc->adcdat0) & 0xFFF;
+
+	return ret;
+}
+
+static unsigned int get_hw_revision(void)
+{
+	int hwrev, mode0, mode1;
+
+	mode0 = get_adc_value(1);		/* HWREV_MODE0 */
+	mode1 = get_adc_value(2);		/* HWREV_MODE1 */
+
+	/*
+	 * XXX Always set the default hwrev as the latest board
+	 * ADC = (voltage) / 3.3 * 4096
+	 */
+	hwrev = 3;
+
+#define IS_RANGE(x, min, max)	((x) > (min) && (x) < (max))
+	if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x0;		/* 0.01V	0.01V */
+	if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x1;		/* 610mV	0.01V */
+	if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x2;		/* 1.16V	0.01V */
+	if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
+		hwrev = 0x3;		/* 1.79V	0.01V */
+#undef IS_RANGE
+
+	debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+
+	return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+	int hwrev;
+
+	hwrev = get_hw_revision();
+
+	board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tUniversal C210\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	switch (get_hwrev()) {
+	case 0:
+		/*
+		 * Set the low to enable LDO_EN
+		 * But when you use the test board for eMMC booting
+		 * you should set it HIGH since it removes the inverter
+		 */
+		/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
+		gpio_direction_output(&gpio1->e3, 6, 0);
+		break;
+	default:
+		/*
+		 * Default reset state is High and there's no inverter
+		 * But set it as HIGH to ensure
+		 */
+		/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
+		gpio_direction_output(&gpio1->e1, 3, 1);
+		break;
+	}
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]	SD_0_CLK(2)
+	 * GPK0[1]	SD_0_CMD(2)
+	 * GPK0[2]	SD_0_CDn	-> Not used
+	 * GPK0[3:6]	SD_0_DATA[0:3](2)
+	 * GPK1[3:6]	SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]	SD_4_CLK(3)
+	 * GPK0[1]	SD_4_CMD(3)
+	 * GPK0[2]	SD_4_CDn	-> Not used
+	 * GPK0[3:6]	SD_4_DATA[0:3](3)
+	 * GPK1[3:6]	SD_4_DATA[4:7](4)
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPK0[0:6] special function 2 */
+		gpio_cfg_pin(&gpio2->k0, i, 0x2);
+		/* GPK0[0:6] pull disable */
+		gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+		/* GPK0[0:6] drv 4x */
+		gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i < 7; i++) {
+		/* GPK1[3:6] special function 3 */
+		gpio_cfg_pin(&gpio2->k1, i, 0x3);
+		/* GPK1[3:6] pull disable */
+		gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+		/* GPK1[3:6] drv 4x */
+		gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+	}
+
+	/* T-flash detect */
+	gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+	gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+
+	/*
+	 * MMC device init
+	 * mmc0	 : eMMC (8-bit buswidth)
+	 * mmc2	 : SD card (4-bit buswidth)
+	 */
+	err = s5p_mmc_init(0, 8);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[4] T-flash detect pin
+	 */
+	if (!gpio_get_value(&gpio2->x3, 4)) {
+		/*
+		 * SD card GPIO:
+		 * GPK2[0]	SD_2_CLK(2)
+		 * GPK2[1]	SD_2_CMD(2)
+		 * GPK2[2]	SD_2_CDn	-> Not used
+		 * GPK2[3:6]	SD_2_DATA[0:3](2)
+		 */
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+			/* GPK2[0:6] special function 2 */
+			gpio_cfg_pin(&gpio2->k2, i, 0x2);
+			/* GPK2[0:6] pull disable */
+			gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			/* GPK2[0:6] drv 4x */
+			gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		}
+		err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index da115f7..f8c0dcd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -123,6 +123,7 @@ omap4_panda                  arm         armv7       panda               ti
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
 actux1                       arm         ixp
 actux2                       arm         ixp
 actux3                       arm         ixp
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
new file mode 100644
index 0000000..c033a8d
--- /dev/null
+++ b/include/configs/s5pc210_universal.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5P		1	/* which is in a S5P Family */
+#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
+#define CONFIG_UNIVERSAL	1	/* working with Universal */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x44800000
+
+/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+#define CONFIG_SYS_CLK_FREQ_C210	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_SERIAL2		1	/* use SERIAL 2 */
+#define CONFIG_BAUDRATE		115200
+
+/* MMC */
+#define CONFIG_GENERIC_MMC	1
+#define CONFIG_MMC		1
+#define CONFIG_S5P_MMC		1
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
+				"128k(s-boot)"\
+				",896k(bootloader)"\
+				",256k(params)"\
+				",2816k(config)"\
+				",8m(csa)"\
+				",7m(kernel)"\
+				",1m(log)"\
+				",12m(modem)"\
+				",60m(qboot)"\
+				",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+				"${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"updateb=" \
+		"onenand erase 0x0 0x100000;" \
+		"onenand write 0x42008000 0x0 0x100000\0" \
+	"updatek=" \
+		"onenand erase 0xc00000 0x500000;" \
+		"onenand write 0x41008000 0xc00000 0x500000\0" \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+	"tftpboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT \
+		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mtdparts=" MTDPARTS_DEFAULT \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M at 0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"ubi=enabled\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=3\0" \
+	"opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT	"Universal # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE	(256 << 10)	/* regular stack 256KB */
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+
+#define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SYS_ONENAND_BASE		0x0C000000
+
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+
+#endif	/* __CONFIG_H */
-- 
1.7.1

[U-Boot] [PATCH v4 3/3] armv7: add support for s5pc210 universal board

[Minkyu Kang]

On 24 January 2011 16:33, Minkyu Kang <mk7.kang@samsung.com> wrote:
> This patch adds support for Samsung s5pc210 universal board
>
> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> v4
> ?use get_ram_size function
> ?fix the sp address
> v3
> ?remove config.mk
> ?don't add board to MAKEALL
> v2
> ?remove debug message
>
> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?5 +-
> ?board/samsung/universal_c210/Makefile ? ? ? ?| ? 51 ++++
> ?board/samsung/universal_c210/lowlevel_init.S | ?395 ++++++++++++++++++++++++++
> ?board/samsung/universal_c210/onenand.c ? ? ? | ? 34 +++
> ?board/samsung/universal_c210/universal.c ? ? | ?250 ++++++++++++++++
> ?boards.cfg ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?include/configs/s5pc210_universal.h ? ? ? ? ?| ?244 ++++++++++++++++
> ?7 files changed, 978 insertions(+), 2 deletions(-)
> ?create mode 100644 board/samsung/universal_c210/Makefile
> ?create mode 100644 board/samsung/universal_c210/lowlevel_init.S
> ?create mode 100644 board/samsung/universal_c210/onenand.c
> ?create mode 100644 board/samsung/universal_c210/universal.c
> ?create mode 100644 include/configs/s5pc210_universal.h
>
applied to u-boot-samsung

Minkyu Kang
-- 
from. prom.
www.promsoft.net