From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Maik_H=E4nig?= Date: Tue, 25 Jan 2011 12:43:45 +0100 Subject: [U-Boot] Uboot can't start kernel after change from version 2009.01 to 2010.09 In-Reply-To: <4D3EB35D.4090905@gmail.com> References: <4D3E8F9D.7040901@ahsoftware.de> <20110125091613.39EA9BB0B9@gemini.denx.de> <4D3E99F9.80400@ahsoftware.de> <4D3EA25E.7050601@hrz.tu-chemnitz.de> <4D3EABE1.4030605@emk-elektronik.de> <4D3EAE19.4050007@hrz.tu-chemnitz.de> <4D3EB35D.4090905@gmail.com> Message-ID: <4D3EB771.4000008@hrz.tu-chemnitz.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Andreas Bie?mann, > please do not hijack a thread! sorry I didn't want do this. I wanted to give some more information. > Ok, you use 2010.09. This was last release before relocate changes. > Therefore it has no connection with the relocation stuff. yes I. I tried to make a patch for 2010.12 but the uboot don't starts so I tried in the first step the version before. It is a similar board to the at91rm9200dk. It hangs in the low level_init file. But I have only a keil jtag debugger and couldn't debug it. or is there any possibility to use it with the gdb? I found the problem in the board.c of the arm architecture. But can't see why. Line 303 is reached but line 312 not. Also line 306 is not reached. I don't know why, maybe you can give me a hint? I think if the problem is found the problem with the at91rm9200dk is also found. >> Is it nessesary to set a >> console parameter in the bootcmd in uboot version 2010.09? > > We don't know your configuration. What tells your working setup in > kernel log messages about 'Command line'? -> /proc/cmdline I only give the MAC and the running image in the cmdline. I think the problem must be in the uboot. > > What is your board exactly? Is it currently in official u-boot or do you > have another tree? > at91rm9200dk is most likely broken with current u-boot (2010.12) and > will be removed for 2011.03. So if you have a at91rm9200dk at hand > please try to get the current u-boot working with that board and provide > patches. You may see my patches for at91rm9200ek which at least make > at91rm9200ek boot from SDRAM when setup correctly with an jtag (-> > booting with at91bootstrab should also work but is untested). It isn't in official u-boot tree. You can have a look in the patch. Best regards / Mit freundlichen Gr??en Maik H?nig -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: u-boot-2010.12.patch Url: http://lists.denx.de/pipermail/u-boot/attachments/20110125/3b524908/attachment.asc