From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan Mallon Date: Thu, 27 Jan 2011 13:14:38 +1300 Subject: [U-Boot] [PATCH v2 2/3] Add support for Bluewater Systems Snapper 9260 and 9G20 modules In-Reply-To: <4D3FCFFB.6060903@emk-elektronik.de> References: <7bc3ea96fb41d5e41ac53281d77d3158bffd3b21.1295995460.git.ryan@bluewatersys.com> <20110126072218.22094BB0B9@gemini.denx.de> <4D3FCFFB.6060903@emk-elektronik.de> Message-ID: <4D40B8EE.50108@bluewatersys.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 01/26/2011 08:40 PM, Reinhard Meyer wrote: > Dear Wolfgang Denk, >> Dear Ryan Mallon, >> >> In >> message >> you wrote: >>> >>> Signed-off-by: Ryan Mallon >>> --- >>> board/bluewater/snapper9260/Makefile | 53 ++++++++ >>> board/bluewater/snapper9260/snapper9260.c | 169 >>> +++++++++++++++++++++++++ >>> include/configs/snapper9260.h | 191 >>> +++++++++++++++++++++++++++++ >>> 3 files changed, 413 insertions(+), 0 deletions(-) >>> create mode 100644 board/bluewater/snapper9260/Makefile >>> create mode 100644 board/bluewater/snapper9260/snapper9260.c >>> create mode 100644 include/configs/snapper9260.h >> >> Entry to MAINTAINERS and boards.cfg missing. > > I am already engaged into this. There are minor coding issues involved, > I will comment on them later. Hi Reinhard, Did you have any additional changes you want made for the Snapper9260/9G20 patches other than adding a MAINTAINERS entry and rolling the boards.cfg change into a single patch? Thanks, ~Ryan -- Bluewater Systems Ltd - ARM Technology Solution Centre Ryan Mallon 5 Amuri Park, 404 Barbadoes St ryan at bluewatersys.com PO Box 13 889, Christchurch 8013 http://www.bluewatersys.com New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934