* [U-Boot] [PATCH 1/2] README: add description of sh_eth driver
@ 2011-01-27 1:06 Yoshihiro Shimoda
2011-01-31 1:15 ` Nobuhiro Iwamatsu
0 siblings, 1 reply; 2+ messages in thread
From: Yoshihiro Shimoda @ 2011-01-27 1:06 UTC (permalink / raw)
To: u-boot
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
README | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/README b/README
index d7a23cd..41458a3 100644
--- a/README
+++ b/README
@@ -888,6 +888,15 @@ The following options need to be configured:
automatically converts one 32 bit word to two 16 bit
words you may also try CONFIG_SMC911X_32_BIT.
+ CONFIG_SH_ETHER
+ Support for Renesas on-chip Ethernet controller
+
+ CONFIG_SH_ETHER_USE_PORT
+ Define the number of ports to be used
+
+ CONFIG_SH_ETHER_PHY_ADDR
+ Define the ETH PHY's address
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405, MPC5200); define
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH 1/2] README: add description of sh_eth driver
2011-01-27 1:06 [U-Boot] [PATCH 1/2] README: add description of sh_eth driver Yoshihiro Shimoda
@ 2011-01-31 1:15 ` Nobuhiro Iwamatsu
0 siblings, 0 replies; 2+ messages in thread
From: Nobuhiro Iwamatsu @ 2011-01-31 1:15 UTC (permalink / raw)
To: u-boot
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Ben's -net tree is not working for a long time.
Wolfgang, can I merge these patches to -sh tree?
Best regards,
Nobuhiro
On Thu, Jan 27, 2011 at 10:06:03AM +0900, Yoshihiro Shimoda wrote:
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> README | 9 +++++++++
> 1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/README b/README
> index d7a23cd..41458a3 100644
> --- a/README
> +++ b/README
> @@ -888,6 +888,15 @@ The following options need to be configured:
> automatically converts one 32 bit word to two 16 bit
> words you may also try CONFIG_SMC911X_32_BIT.
>
> + CONFIG_SH_ETHER
> + Support for Renesas on-chip Ethernet controller
> +
> + CONFIG_SH_ETHER_USE_PORT
> + Define the number of ports to be used
> +
> + CONFIG_SH_ETHER_PHY_ADDR
> + Define the ETH PHY's address
> +
> - USB Support:
> At the moment only the UHCI host controller is
> supported (PIP405, MIP405, MPC5200); define
> --
> 1.7.1
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-01-31 1:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-27 1:06 [U-Boot] [PATCH 1/2] README: add description of sh_eth driver Yoshihiro Shimoda
2011-01-31 1:15 ` Nobuhiro Iwamatsu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox