From: Albert ARIBAUD <albert.aribaud@free.fr>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/8] orion5x: Fix wrong address in orion5x_sdram_bar
Date: Sat, 29 Jan 2011 08:24:26 +0100 [thread overview]
Message-ID: <4D43C0AA.6050007@free.fr> (raw)
In-Reply-To: <1296262841-8819-2-git-send-email-mspang@csclub.uwaterloo.ca>
Hi Michael,
Le 29/01/2011 02:00, Michael Spang a ?crit :
> This code intends to read the SDRAM controller base address registers
> but is instead reading the CPU window base address registers.
Side note: IIUC this change is not required since the CPU Window
registers match the SDRAM controller registers on orion5x in U-boot; but
it is fine if only for the sake of correctness, and assuming it works
for other orion5x boards (testing underway for edminiv2).
> Signed-off-by: Michael Spang<mspang@csclub.uwaterloo.ca>
> ---
> arch/arm/cpu/arm926ejs/orion5x/dram.c | 2 +-
> arch/arm/include/asm/arch-orion5x/orion5x.h | 1 +
> 2 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c
> index b749282..7f3a318 100644
> --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c
> +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c
> @@ -38,7 +38,7 @@ u32 orion5x_sdram_bar(enum memory_bank bank)
> {
> struct orion5x_ddr_addr_decode_registers *winregs =
> (struct orion5x_ddr_addr_decode_registers *)
Please remove the 'ddr_' part of the struct name while you're at it:
this struct is not DDR specific, it also covers CPU window register.
> - ORION5X_CPU_WIN_BASE;
> + ORION5X_SDRAM_CTRL_BASE;
>
> u32 result = 0;
> u32 enable = 0x01& winregs[bank].size;
> diff --git a/arch/arm/include/asm/arch-orion5x/orion5x.h b/arch/arm/include/asm/arch-orion5x/orion5x.h
> index e3d3f76..f262ad1 100644
> --- a/arch/arm/include/asm/arch-orion5x/orion5x.h
> +++ b/arch/arm/include/asm/arch-orion5x/orion5x.h
> @@ -42,6 +42,7 @@
> #define ORION5X_REGISTER(x) (ORION5X_REGS_PHY_BASE + x)
>
> /* Documented registers */
> +#define ORION5X_SDRAM_CTRL_BASE (ORION5X_REGISTER(0x01500))
> #define ORION5X_TWSI_BASE (ORION5X_REGISTER(0x11000))
> #define ORION5X_UART0_BASE (ORION5X_REGISTER(0x12000))
> #define ORION5X_UART1_BASE (ORION5X_REGISTER(0x12100))
Amicalement,
--
Albert.
next prev parent reply other threads:[~2011-01-29 7:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-29 1:00 [U-Boot] [PATCH 1/8] arm926ej-s: Invalidate instruction cache in flush_cache Michael Spang
2011-01-29 1:00 ` [U-Boot] [PATCH 2/8] orion5x: Fix wrong address in orion5x_sdram_bar Michael Spang
2011-01-29 7:24 ` Albert ARIBAUD [this message]
2011-03-17 19:47 ` Michael Spang
2011-03-18 5:57 ` Rogan Dawes
2011-03-18 6:46 ` Michael Spang
2011-01-29 1:00 ` [U-Boot] [PATCH 3/8] orion5x: Increase maximum bank size to 128M Michael Spang
2011-01-29 7:26 ` Albert ARIBAUD
2011-01-29 1:00 ` [U-Boot] [PATCH 4/8] orion5x: Allow SDRAM initialization to be omitted Michael Spang
2011-01-29 7:36 ` Albert ARIBAUD
2011-03-17 19:52 ` Michael Spang
2011-01-29 1:00 ` [U-Boot] [PATCH 5/8] mvgbe: Support preserving the existing MAC address Michael Spang
2011-01-29 1:00 ` [U-Boot] [PATCH 6/8] Add board support for TS-7800 Michael Spang
2011-01-29 7:39 ` Albert ARIBAUD
2011-03-17 19:50 ` Michael Spang
2011-01-30 19:14 ` Wolfgang Denk
2011-01-29 1:00 ` [U-Boot] [PATCH 7/8] Add NAND " Michael Spang
2011-01-30 19:15 ` Wolfgang Denk
2011-01-29 1:00 ` [U-Boot] [PATCH 8/8] Add README " Michael Spang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D43C0AA.6050007@free.fr \
--to=albert.aribaud@free.fr \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox