From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michael Schwingen <rincewind@discworld.dascon.de>
Date: Tue, 01 Feb 2011 08:35:39 +0100
Subject: [U-Boot] calling pci_init before relocation?
In-Reply-To: <4D4676A2.7060600@denx.de>
References: <4D45DA9F.5000903@discworld.dascon.de>
	<4D45E10D.4020302@free.fr>	<4D45EA43.3070108@discworld.dascon.de>
	<4D45EDC4.9020605@free.fr> <4D4676A2.7060600@denx.de>
Message-ID: <4D47B7CB.6040206@discworld.dascon.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/31/2011 09:45 AM, Heiko Schocher wrote:
>
> I think, on arm plattforms we should move the pci_init as it is
> done on powerpc plattforms, to board_init_r. It seems to me, that
> this is a leftover from introducing relocation to arm. I also just
> could think of using a "PCI console" before relocation... and if
> I looked right, this is not used on any arm plattform ...
Fine. I'll include that change with the other changes needed to get PCI 
up again on IXP425.

cu
Michael