[U-Boot] [PATCH 2/2] at91sam9261ek: make operational again

[Michael Trimarchi <trimarchi@gandalf.sssup.it>]

Dear Remy

On 01/27/2011 11:46 PM, Remy Bohmer wrote:
> Since U-boot v2010.12 the at91sam9261ek board is broken.
> This is solved and tested on this board.
>
> Note: It requires that the 1st stage bootloader (like Atmel at91-bootstrap)
> to load U-boot at a different address compared to previous releases of
> U-boot due to conflicts in the BSS area during relocation.
> (0x23f00000 -> -0x23e00000)
>
> Derived from a patch of: Alexander Stein <alexander.stein@systec-electronic.com>
>
> Signed-off-by: Remy Bohmer <linux@bohmer.net>
Hi

/home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld  -pie -r -o libat91.o  lowlevel_init.o clock.o cpu.o reset.o timer.o
/home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: -r and -shared may not be used together

I have tried this patch but this a problem releated to linking option. Do you have this problem?

Michael

> ---
>  board/atmel/at91sam9261ek/Makefile        |   10 +++++-----
>  board/atmel/at91sam9261ek/at91sam9261ek.c |    7 ++++---
>  board/atmel/at91sam9261ek/config.mk       |    1 -
>  include/configs/at91sam9261ek.h           |   25 +++++++++++++++++++++----
>  4 files changed, 30 insertions(+), 13 deletions(-)
>  delete mode 100644 board/atmel/at91sam9261ek/config.mk
>
> diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile
> index 9d20ba0..1da810f 100644
> --- a/board/atmel/at91sam9261ek/Makefile
> +++ b/board/atmel/at91sam9261ek/Makefile
> @@ -29,16 +29,16 @@ include $(TOPDIR)/config.mk
>  
>  LIB	= $(obj)lib$(BOARD).o
>  
> -COBJS-y += at91sam9261ek.o
> +COBJS-y += $(BOARD).o
>  COBJS-y += led.o
>  COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
>  
> -SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> -OBJS	:= $(addprefix $(obj),$(COBJS-y))
> -SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
>  
>  $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> -	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +	$(call cmd_link_o_target, $(OBJS))
>  
>  clean:
>  	rm -f $(SOBJS) $(OBJS)
> diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
> index de5cfae..25c181e 100644
> --- a/board/atmel/at91sam9261ek/at91sam9261ek.c
> +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
> @@ -246,7 +246,7 @@ int board_init(void)
>  	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
>  #endif
>  	/* adress of boot parameters */
> -	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> +	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>  
>  	at91_serial_hw_init();
>  #ifdef CONFIG_CMD_NAND
> @@ -273,8 +273,9 @@ int board_eth_init(bd_t *bis)
>  
>  int dram_init(void)
>  {
> -	gd->bd->bi_dram[0].start = PHYS_SDRAM;
> -	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
> +	/* dram_init must store complete ramsize in gd->ram_size */
> +	gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
> +			CONFIG_SYS_SDRAM_SIZE);
>  	return 0;
>  }
>  
> diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk
> deleted file mode 100644
> index e554a45..0000000
> --- a/board/atmel/at91sam9261ek/config.mk
> +++ /dev/null
> @@ -1 +0,0 @@
> -CONFIG_SYS_TEXT_BASE = 0x23f00000
> diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
> index 401478b..0cffd94 100644
> --- a/include/configs/at91sam9261ek.h
> +++ b/include/configs/at91sam9261ek.h
> @@ -27,6 +27,8 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> +#include <asm/sizes.h>
> +
>  #define CONFIG_AT91_LEGACY
>  
>  /* ARM asynchronous clock */
> @@ -39,6 +41,7 @@
>  #else
>  #define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
>  #endif
> +#define CONFIG_AT91FAMILY
>  #define CONFIG_ARCH_CPU_INIT
>  #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
>  
> @@ -105,11 +108,21 @@
>  #define CONFIG_CMD_DHCP		1
>  #define CONFIG_CMD_NAND		1
>  #define CONFIG_CMD_USB		1
> +#define CONFIG_CMD_CACHE	1
>  
>  /* SDRAM */
>  #define CONFIG_NR_DRAM_BANKS		1
> -#define PHYS_SDRAM			0x20000000
> -#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
> +#define CONFIG_SYS_SDRAM_BASE		0x20000000
> +#define CONFIG_SYS_SDRAM_SIZE		SZ_64M	/* 64 megs */
> +
> +/*
> + * AT91-bootstrap expects that U-boot needs to be loaded at 0x23f00000
> + * but since U-boot is now being relocated to the end of RAM which is
> + * almost in the same area, there will be an overlap in the BSS segment
> + * resulting in a lockup during boot. So, we need to tell the
> + * AT91-bootstrap code to load it at a lower address, namely 0x23e00000
> + */
> +#define CONFIG_SYS_TEXT_BASE			0x23e00000
>  
>  /* DataFlash */
>  #define CONFIG_ATMEL_DATAFLASH_SPI
> @@ -168,7 +181,7 @@
>  
>  #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
>  
> -#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
> +#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
>  #define CONFIG_SYS_MEMTEST_END			0x23e00000
>  
>  #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
> @@ -230,8 +243,12 @@
>   * Size of malloc() pool
>   */
>  #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
> +/* size in bytes reserved for initial data */
> +
> +#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
> +					- GENERATED_GBL_DATA_SIZE)
>  
> -#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
> +#define CONFIG_STACKSIZE	(SZ_32K)	/* regular stack */
>  
>  #ifdef CONFIG_USE_IRQ
>  #error CONFIG_USE_IRQ not supported