From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Tue, 01 Feb 2011 18:51:08 +0100
Subject: [U-Boot] [PATCH V4 11/11] Add support for Freescale's mx35pdk
	board.
In-Reply-To: <1295546715-7199-1-git-send-email-sbabic@denx.de>
References: <1295546019-12646-1-git-send-email-sbabic@denx.de>
	<1295546715-7199-1-git-send-email-sbabic@denx.de>
Message-ID: <4D48480C.5080701@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/20/2011 07:05 PM, Stefano Babic wrote:
> The patch adds suupport for the Freescale's mx35pdk board
> (known as well as mx35_3stack).
> 
> The board boots from the NOR flash. Following devices
> are supported:
>  - two ethernet devices (FEC and SMC911x on debug board)
>  - I2C
>  - PMIC (MC13892) via I2C interface
>  - UART
>  - NOR flash (64MB)
>  - NAND flash (2GB)
>  - basic access to mc9sdz60 registers via I2C interface
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================