From: Michael Trimarchi <trimarchi@gandalf.sssup.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] at91sam9261ek: make operational again
Date: Tue, 01 Feb 2011 20:11:28 +0100 [thread overview]
Message-ID: <4D485AE0.5090600@gandalf.sssup.it> (raw)
In-Reply-To: <4D47F99D.1080208@free.fr>
Hi
On 02/01/2011 01:16 PM, Albert ARIBAUD wrote:
> Le 01/02/2011 11:45, Michael Trimarchi a ?crit :
>
>> Hi
>>
>> /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld -pie -r -o libat91.o lowlevel_init.o clock.o cpu.o reset.o timer.o
>> /home/toolchain/bin/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: -r and -shared may not be used together
>>
>> I have tried this patch but this a problem releated to linking option. Do you have this problem?
>>
>> Michael
>
> Read up recent posts on the list: this was detected and is fixed in the
> master branch of the u-boot-arm repository.
>
> Amicalement,
I see, but I see but I have other little problem. I have fixed the compilation, but I have a segmentation fault.
Starting program: /opt/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld -pie -Bstatic -T u-boot.lds -Ttext 0x23e00000 arch/arm/cpu/arm926ejs/start.o --start-group api/libapi.o arch/arm/cpu/arm926ejs/at91/libat91.o arch/arm/cpu/arm926ejs/libarm926ejs.o arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/gadget/libusb_gadget.o
drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o net/libnet.o post/libpost.o board/atmel/at91sam9261ek/libat91sam9261ek.o --end-group /home/michael/u-boot/arch/arm/lib/eabi_compat.o -L /opt/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/../lib/gcc/arm-none-linux-gnueabi/4.1.2 -lgcc -Map u-boot.map -o u-boot
/opt/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: u-boot: warning: allocated section `.bss' not in segment
Program received signal SIGSEGV, Segmentation fault.
0x08081ebd in elf32_arm_finish_dynamic_sections ()
(gdb) bt
#0 0x08081ebd in elf32_arm_finish_dynamic_sections ()
#1 0x0809cc2b in bfd_elf_final_link ()
#2 0x0807b525 in elf32_arm_bfd_final_link ()
#3 0x0805bfce in ldwrite ()
#4 0x0805a0be in main ()
Michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: timer.patch
Type: text/x-patch
Size: 673 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110201/f1326848/attachment.bin
next prev parent reply other threads:[~2011-02-01 19:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-27 22:46 [U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash driver Remy Bohmer
2011-01-27 22:46 ` [U-Boot] [PATCH 2/2] at91sam9261ek: make operational again Remy Bohmer
2011-01-27 22:49 ` Remy Bohmer
2011-01-27 23:11 ` Albert ARIBAUD
2011-01-28 20:38 ` Remy Bohmer
2011-02-01 10:45 ` Michael Trimarchi
2011-02-01 12:16 ` Albert ARIBAUD
2011-02-01 19:11 ` Michael Trimarchi [this message]
2011-02-01 19:31 ` Remy Bohmer
2011-02-01 19:54 ` Reinhard Meyer
2011-02-05 12:54 ` Remy Bohmer
2011-04-18 10:36 ` [U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash driver Reinhard Meyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D485AE0.5090600@gandalf.sssup.it \
--to=trimarchi@gandalf.sssup.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox