From: Mike Rapoport <mike@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Patch V6 0/4] Add basic NVIDIA Tegra2 SoC support
Date: Wed, 02 Feb 2011 09:57:03 +0200 [thread overview]
Message-ID: <4D490E4F.6040803@compulab.co.il> (raw)
In-Reply-To: <AANLkTi=R+9siobmpvWYxkSOnDkrw72hC0evZ7AiXVY-H@mail.gmail.com>
On 02/02/11 02:09, Tom Warren wrote:
> I haven't seen any new feedback on this version (V6) of the patchset
> since it was posted.
>
> Wolfgang, Mike, Peter, et al - are you happy with the current patch?
I'm Ok with the current patch.
> If so, when can I expect it to be pushed?
>
> Thanks,
>
> Tom
>
> On Thu, Jan 27, 2011 at 1:58 PM, Tom Warren <twarren.nvidia@gmail.com> wrote:
>> This series of patches adds preliminary/baseline support for NVIDIA's
>> Tegra2 SoC. Basic CPU (AVP), RAM and UART init are covered so that the
>> system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
>>
>> Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
>>
>> Changes for V2:
>> - Coding style cleanup
>> - Remove mach-types.h change; wait for ARM kernel sync-up
>> - Move serial driver changes to separate patch
>> - Use board/nvidia/ instead of /board/tegra
>> - Remove TRUE/FALSE defines
>> - Use standard NS16550 register/bit defines in UART init
>> - Change nv-common.h config file to tegra2-common.h
>>
>> Changes for V3:
>> - Use I/O accessors for Tegra2 HW MMIO register access
>> - Allow conditional compile of UARTA/UARTD code to save space
>>
>> Changes for V4:
>> - Use address of HW structs (&pmc, etc.) in readl/writel
>> - Remove empty lines, fix mixed case hex #s & comments in header(s)
>> - Move board/nvidia/common/board.c UART code & header to
>> arch/arm/cpu/armv7/tegra2/
>> - Declare internal functions as static in UART code
>>
>> Changes for V5:
>> - Move arch/arm/cpu/armv7/uart.c & board.h to drivers/serial and
>> rename to serial_tegra2.c
>> - Remove use of uart_num & UART_A/D in serial_tegra2, simplify code
>>
>> Changes for V6:
>> - Fix uart.c add & delete in previous patchset
>> - Move pinmux & clock init code to common board file as per review
>> - Use #if defined() where possible in config files/UART code
>> - Drop all typedef and volatile struct declarations in header files
>>
>> Tom Warren (4):
>> arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
>> serial: Add Tegra2 serial port support
>> arm: Tegra2: Add support for NVIDIA Harmony board
>> arm: Tegra2: Add support for NVIDIA Seaboard board
>>
>> MAINTAINERS | 5 +
>> arch/arm/cpu/armv7/tegra2/Makefile | 48 +++++++
>> arch/arm/cpu/armv7/tegra2/board.c | 88 ++++++++++++
>> arch/arm/cpu/armv7/tegra2/config.mk | 28 ++++
>> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 65 +++++++++
>> arch/arm/cpu/armv7/tegra2/sys_info.c | 35 +++++
>> arch/arm/cpu/armv7/tegra2/timer.c | 122 ++++++++++++++++
>> arch/arm/include/asm/arch-tegra2/clk_rst.h | 165 ++++++++++++++++++++++
>> arch/arm/include/asm/arch-tegra2/pinmux.h | 55 ++++++++
>> arch/arm/include/asm/arch-tegra2/pmc.h | 124 +++++++++++++++++
>> arch/arm/include/asm/arch-tegra2/sys_proto.h | 35 +++++
>> arch/arm/include/asm/arch-tegra2/tegra2.h | 49 +++++++
>> arch/arm/include/asm/arch-tegra2/uart.h | 47 ++++++
>> board/nvidia/common/board.c | 193 ++++++++++++++++++++++++++
>> board/nvidia/harmony/Makefile | 50 +++++++
>> board/nvidia/seaboard/Makefile | 50 +++++++
>> boards.cfg | 2 +
>> common/serial.c | 3 +-
>> drivers/serial/Makefile | 1 +
>> drivers/serial/serial_tegra2.c | 77 ++++++++++
>> drivers/serial/serial_tegra2.h | 29 ++++
>> include/configs/harmony.h | 49 +++++++
>> include/configs/seaboard.h | 43 ++++++
>> include/configs/tegra2-common.h | 160 +++++++++++++++++++++
>> include/serial.h | 3 +-
>> 25 files changed, 1524 insertions(+), 2 deletions(-)
>> create mode 100644 arch/arm/cpu/armv7/tegra2/Makefile
>> create mode 100644 arch/arm/cpu/armv7/tegra2/board.c
>> create mode 100644 arch/arm/cpu/armv7/tegra2/config.mk
>> create mode 100644 arch/arm/cpu/armv7/tegra2/lowlevel_init.S
>> create mode 100644 arch/arm/cpu/armv7/tegra2/sys_info.c
>> create mode 100644 arch/arm/cpu/armv7/tegra2/timer.c
>> create mode 100644 arch/arm/include/asm/arch-tegra2/clk_rst.h
>> create mode 100644 arch/arm/include/asm/arch-tegra2/pinmux.h
>> create mode 100644 arch/arm/include/asm/arch-tegra2/pmc.h
>> create mode 100644 arch/arm/include/asm/arch-tegra2/sys_proto.h
>> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2.h
>> create mode 100644 arch/arm/include/asm/arch-tegra2/uart.h
>> create mode 100644 board/nvidia/common/board.c
>> create mode 100644 board/nvidia/harmony/Makefile
>> create mode 100644 board/nvidia/seaboard/Makefile
>> create mode 100644 drivers/serial/serial_tegra2.c
>> create mode 100644 drivers/serial/serial_tegra2.h
>> create mode 100644 include/configs/harmony.h
>> create mode 100644 include/configs/seaboard.h
>> create mode 100644 include/configs/tegra2-common.h
>>
>> --
>> 1.7.3.5
>>
>>
--
Sincerely yours,
Mike.
next prev parent reply other threads:[~2011-02-02 7:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-27 20:58 [U-Boot] [Patch V6 0/4] Add basic NVIDIA Tegra2 SoC support Tom Warren
2011-01-27 20:58 ` [U-Boot] [Patch V6 1/4] arm: Tegra2: " Tom Warren
2011-01-27 20:58 ` [U-Boot] [Patch V6 2/4] serial: Add Tegra2 serial port support Tom Warren
2011-01-27 20:58 ` [U-Boot] [Patch V6 3/4] arm: Tegra2: Add support for NVIDIA Harmony board Tom Warren
2011-01-27 20:58 ` [U-Boot] [Patch V6 4/4] arm: Tegra2: Add support for NVIDIA Seaboard board Tom Warren
2011-02-02 0:09 ` [U-Boot] [Patch V6 0/4] Add basic NVIDIA Tegra2 SoC support Tom Warren
2011-02-02 7:57 ` Mike Rapoport [this message]
2011-02-02 17:06 ` Tom Warren
2011-02-02 18:44 ` Albert ARIBAUD
2011-02-05 6:50 ` Albert ARIBAUD
2011-02-07 17:08 ` Tom Warren
2011-02-03 6:28 ` Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D490E4F.6040803@compulab.co.il \
--to=mike@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox