* [U-Boot] MPC8536 - U-Boot - Serial Port baudrate
@ 2011-02-03 13:56 Fischer, Sven
2011-02-04 4:56 ` Sinan Akman
0 siblings, 1 reply; 2+ messages in thread
From: Fischer, Sven @ 2011-02-03 13:56 UTC (permalink / raw)
To: u-boot
Hi,
I'm trying to get the NAND-Boot working.
So far I was able to access the 4k-byte Bootloader and it is copying the
whole U-Boot to L2-SRAM and it tries to start it from the new location.
While loading the 4k-byte bootloader the serial interface is working
fine. After loading from the new loaction the serial interface reports
strange characters.
Do you know where I have to set the baudrate?
Regards,
Sven
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] MPC8536 - U-Boot - Serial Port baudrate
2011-02-03 13:56 [U-Boot] MPC8536 - U-Boot - Serial Port baudrate Fischer, Sven
@ 2011-02-04 4:56 ` Sinan Akman
0 siblings, 0 replies; 2+ messages in thread
From: Sinan Akman @ 2011-02-04 4:56 UTC (permalink / raw)
To: u-boot
Fischer, Sven wrote:
> Hi,
>
> I'm trying to get the NAND-Boot working.
Are you doing this MPC8536RDK (aka csb1880)
or for your custom design (or referring to
current implementation in MPC8536DS) ?
-- sinan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-02-04 4:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-03 13:56 [U-Boot] MPC8536 - U-Boot - Serial Port baudrate Fischer, Sven
2011-02-04 4:56 ` Sinan Akman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox