From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 07 Feb 2011 15:13:29 +0100 Subject: [U-Boot] [RFC] ARM: mx31pdk: Use the new relocation scheme In-Reply-To: <4D4FD850.3050800@freescale.com> References: <1294836544-24512-1-git-send-email-fabio.estevam@freescale.com> <4D2F004B.9090204@denx.de> <4D309716.4000905@freescale.com> <4D4E8E11.2010906@gmail.com> <4D4FD850.3050800@freescale.com> Message-ID: <4D4FFE09.2090709@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/07/2011 12:32 PM, Fabio Estevam wrote: > Hi Magnus, > > On 2/6/2011 10:03 AM, Magnus Lilja wrote: ... > Hi, >> I have no idea if this breaks other boards but at least it's start >> for further work. I tried it on the imx31 litekit (which boots from >> NOR) but that board doesn't seem to boot even before applying >> Fabios patch, I'll see if I can figure out why that board is broken >> now. Don't know when though. > > I will let others comment about the changes you did in > arch/arm/cpu/arm1136/start.S Will also try it later today. Anyway, arch/arm/cpu/arm1136/start.S cannot be compiled without the changes suggested by Magnus due to the following lines: _nand_boot_ofs : .word nand_boot - _start ":" seems to me wrong in any case and should be fixed. Is this syntax accepted by newer compiler releases ? IMHO board_init_f must be called absolutely before nand_boot. I have tested the changes suggested by Magnus on a i.MX35 and the board boots from NAND. However, I do not see the problems with the console, and I can think they are not related to this issue. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================