From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefano babic Date: Tue, 08 Feb 2011 21:18:52 +0100 Subject: [U-Boot] [RFC] ARM: mx31pdk: Use the new relocation scheme In-Reply-To: <4D5198EA.7020703@gmail.com> References: <1294836544-24512-1-git-send-email-fabio.estevam@freescale.com> <4D2F004B.9090204@denx.de> <4D309716.4000905@freescale.com> <4D4E8E11.2010906@gmail.com> <4D4FD850.3050800@freescale.com> <4D4FFE09.2090709@denx.de> <4D504CAA.7000302@gmail.com> <4D5178DA.4050401@freescale.com> <4D518280.3010300@denx.de> <4D5198EA.7020703@gmail.com> Message-ID: <4D51A52C.8080002@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 08.02.2011 20:26, schrieb Magnus Lilja: > Patch reposted as a separate mail a couple of minutes ago. > > As I mention in the patch I think Fabio's patch has to be applied first. I think your patch is ok - Fabio fixed the syntax error as you do. We need only one of them. > Another solution would be to change my patch somewhat to apply it first > and then update Fabios patch to only touch the i.MX31-PDK specific > files. IMHO this is the preferred way, because the two issues are orthogonal. Your patch fixes booting from NAND for ARM11, and Fabio's patch fix the mx31pdk board only. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================