From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.aribaud@free.fr>
Date: Tue, 08 Feb 2011 21:50:36 +0100
Subject: [U-Boot] [RFC] ARM: mx31pdk: Use the new relocation scheme
In-Reply-To: <4D51A52C.8080002@denx.de>
References: <1294836544-24512-1-git-send-email-fabio.estevam@freescale.com>	<4D2F004B.9090204@denx.de>	<4D309716.4000905@freescale.com>	<4D4E8E11.2010906@gmail.com>	<4D4FD850.3050800@freescale.com>	<4D4FFE09.2090709@denx.de>
	<4D504CAA.7000302@gmail.com>	<4D5178DA.4050401@freescale.com>
	<4D518280.3010300@denx.de> <4D5198EA.7020703@gmail.com>
	<4D51A52C.8080002@denx.de>
Message-ID: <4D51AC9C.8040908@free.fr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Le 08/02/2011 21:18, stefano babic a ?crit :
> Am 08.02.2011 20:26, schrieb Magnus Lilja:
>> Patch reposted as a separate mail a couple of minutes ago.
>>
>> As I mention in the patch I think Fabio's patch has to be applied first.
>
> I think your patch is ok - Fabio fixed the syntax error as you do. We
> need only one of them.
>
>> Another solution would be to change my patch somewhat to apply it first
>> and then update Fabios patch to only touch the i.MX31-PDK specific
>> files.
>
> IMHO this is the preferred way, because the two issues are orthogonal.
> Your patch fixes booting from NAND for ARM11, and  Fabio's patch fix the
> mx31pdk board only.

Agreed.

Note also that there was a recent patch to ARM926's start.S (replacing 
'adr r1, _start' with 'ldr r1, _TEXT_BASE' at line 284). The same should 
be done on arm1136.

> Regards,
> Stefano

Amicalement,
-- 
Albert.