From: Graeme Russ <graeme.russ@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 22/32] sc520: Move RAM sizing code from asm to C
Date: Sat, 12 Feb 2011 15:30:02 +1100 [thread overview]
Message-ID: <4D560CCA.3060209@gmail.com> (raw)
In-Reply-To: <1296822959-3927-23-git-send-email-graeme.russ@gmail.com>
On 04/02/11 23:35, Graeme Russ wrote:
> Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
> ---
> arch/i386/cpu/sc520/Makefile | 2 +-
> arch/i386/cpu/sc520/sc520.c | 110 -------
> arch/i386/cpu/sc520/sc520_asm.S | 608 -------------------------------------
> arch/i386/cpu/sc520/sc520_sdram.c | 532 ++++++++++++++++++++++++++++++++
> arch/i386/cpu/start.S | 48 +--
> arch/i386/include/asm/ic/sc520.h | 57 ++++
> arch/i386/lib/board.c | 10 +-
> board/eNET/eNET.c | 6 -
> board/eNET/eNET_start16.S | 5 -
> include/configs/eNET.h | 2 +-
> 10 files changed, 612 insertions(+), 768 deletions(-)
> delete mode 100644 arch/i386/cpu/sc520/sc520_asm.S
> create mode 100644 arch/i386/cpu/sc520/sc520_sdram.c
>
Applied to u-boot-x86
Regards,
Graeme
next prev parent reply other threads:[~2011-02-12 4:30 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-04 12:35 [U-Boot] [PATCH 00/32] Massive x86 Update - Bring x86 in line with ARM and PPC Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 01/32] x86: Fix definition of global_data struct for asm-offsets.c Graeme Russ
2011-02-12 4:25 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 02/32] x86: Align config.mk and linker scripts with other arches Graeme Russ
2011-02-04 20:42 ` Scott Wood
2011-02-04 22:45 ` Graeme Russ
2011-02-10 1:05 ` =?//TRANSLIT?Q?Lo=EFc?= Minier
2011-02-12 4:26 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 03/32] eNET: Create distinct board configurations Graeme Russ
2011-02-12 4:26 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 04/32] x86: Parametize values used in linker script Graeme Russ
2011-02-12 4:26 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 05/32] sc520: Sort Makefile Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 06/32] x86: Fix mangled umlauts Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 07/32] x86: Add stack dump to register dump Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 08/32] x86: Move Global Descriptor Table defines to processor.h Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 09/32] x86: Add processor flags header from linux Graeme Russ
2011-02-12 4:27 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 10/32] x86: Call early_board_init when warm booting Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 11/32] x86: Make cpu init functions weak Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 12/32] sc520: Define MMCR address in include file Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 13/32] sc520: Move board specific settings to board init function Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 14/32] sc520: Remove printf calls from cpu_init_f Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 15/32] eNET: Fix eNET Interrupt Setup for Linux Graeme Russ
2011-02-12 4:28 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 16/32] eNET: Add RTC support to eNET Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 17/32] eNET: Define MMCR values in config.h Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 18/32] eNET: Rearrange PAR assignments Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 19/32] eNET: General code cleanup Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 20/32] x86: Move initial gd to fixed location Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 21/32] x86: Use Cache-As-RAM for initial stack Graeme Russ
2011-02-12 4:29 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 22/32] sc520: Move RAM sizing code from asm to C Graeme Russ
2011-02-12 4:30 ` Graeme Russ [this message]
2011-02-04 12:35 ` [U-Boot] [PATCH 23/32] x86: Defer setup of final stack Graeme Russ
2011-02-12 4:30 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 24/32] x86: Move call to dram_init_f into board_init_f Graeme Russ
2011-02-12 4:30 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 25/32] x86: Move test for cold boot into init functions Graeme Russ
2011-02-12 4:30 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 26/32] x86: Move console initialisation into board_init_f Graeme Russ
2011-02-12 4:30 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 27/32] x86: Fix incorrect usage of relocation offset Graeme Russ
2011-02-12 4:30 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 28/32] x86: Split board_init_f() into init_fnc_t compatible functions Graeme Russ
2011-02-12 4:31 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 29/32] x86: Rearrange function calls in board_init_f Graeme Russ
2011-02-12 4:31 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 30/32] x86: Convert board_init_f to use an init_sequence Graeme Russ
2011-02-12 4:31 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 31/32] sc520: Release CAR and enable caching Graeme Russ
2011-02-12 4:31 ` Graeme Russ
2011-02-04 12:35 ` [U-Boot] [PATCH 32/32] eNET: Move initial Global Data into CAR Graeme Russ
2011-02-12 4:31 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D560CCA.3060209@gmail.com \
--to=graeme.russ@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox