[U-Boot] mpc5125: nand flash commands

[Stefano Babic <sbabic@denx.de>]

On 02/14/2011 01:08 PM, RONETIX - Asen Dimov wrote:
> Hello,
> 

Hi,

> Have anybody made the nand support for mpc5125, especially commads for
> flashing first stage boot loader and U-Boot:
> nand_e, nand_w and nand_loader, which are implemented in
> /fscale/cys/git-freescale/u-boot-2009.03/drivers/mtd/nand/mpc5125_nfc_mtc.c.

They are not part of U-Boot mainline, and for this reason they are not
discussed here. There is no mpc5125 NAND driver in u-boot mainline at
the moment.

> 
> The BSP from Freescale has these commands as as object file not source.
> We need these sources to implement nand programming in our
> JTAG programmer.
> 
> Since U-Boot is GPL licensed all sources shout be public.

You are right. Ask Freescale to publish those sources.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================